Addonics M2HDU11-2S - 1;11 M2 (NGFF) /SSD/HDD Duplicator PRO

The Addonics family of M2/SSD/HDD duplicator is designed for making multiple copies of M2 SATA SSD or 2.5" SATA HDD/SSD from a single master drive. Each duplicator comes bundled with a set of 2,5" M2 flash drive adapter that turns a M2 SATA SSD into a 2.5" SATA SSD.You can mix and match the M2 SATA SSD, 2.5" SSD or hard drive into the duplicator, thus making it a handy tool for transferring the content between the M2 SATA SSD and 2.5" SATA HDD/SSD.There is no computer needed or complex software to operate the Addonics duplicator. Just load the master media into the source bay and the target media of capacity equal or larger into the target bays, lock the drive doors and push the start button to start the copying process.

About This Model

This 1:11 M2 SATA SSD/ 2.5" SATA HDD/SSDHS Duplicator PRO allows you to copy from one source media onto as many as eleven (11) target media at one time.Using theincluded 2.5"M2 flash driveadapters, the M2 SATA SSD can be used just like a regular 2.5" SATA hard drive.The source and target drive can be of either M2 SATA SSD, 2.5" SATA SSD or 2.5" SATA hard drive. An additional 3.5" source slot is included to allow using 3.5" SATA HDD as a source media, a convenient solution to transfer data from 3.5" SATA drive to M2 SSD, 2.5" SATA hard drive or SSD. Drives are loaded and unloaded from the duplicator just like cassette tape without any drive tray or special tool.Using other optional Addonics2.5" Flash driveadapters, this duplicator can also be used for making copies of many common flash media such as mSATA/mini mSATA SSD, CFast card, CF card, slim SATA and 1.8" HDD/SSD.

Illustration of loading the M2 card or 2.5" SSD/HDDinto the duplicator

Illustration of installing the M2 SATA SSD onto the 2.5" M2 SSD drive adapter

The following Addonics optional 2.5" flash drive kit allows this duplicator to copy mSATA/mini mSATA, CFast, CF card or slim SATA SSD
(Shown with media side facing up)

note: the flash cards shown above are for illustration purpose and are not part of the flash drive adapter

FEATURES

• Copy up to eleven (11) M2 SATA SSD or 2.5" SATA HDD/SSD with thickness up to 9.5 mm
• Great for cloning hard drives, making back up hard drives, system upgrade or data distribution or for copying data between M2 SATA SSD and 2.5" SATA HDD/SSD
• Supported source media- 3.5" SATA HDD, 2.5"M2 SATA SSD or 2.5" SATA HDD/SSD
• Source and 11 targets can be a mix of M2 SATA SSD or 2.5" HDD/SSD
• Comes with twelve (12) units of 2.5" M2 flash drive adapters(AD25M2SSD-E)to convert M2 SATA SSD to 2.5" SATA SSD
• Additional support for mSATA/mini SATA, CFast,CF, slim SATA SSD and 1.8" HDD/SSDwith the following optional model of 2.5" flash drive kit -AD25MSD-E,AD25CFASTD-N,AD25CFD-N,AA25SEMBK,AD18M25S
• Typicalcopying speed^*:

• Support any file system
• Support maximum media capacity >4TB
• Source and Destination drives are added or removed like tape cartridges from each drive bay with no special tool required
• Drive sanitization:
  • SECURE ERASE - HDD duplicator sends a WIPE command to the hard drive. This command fills 00 string to entire HDD (this option may not be supported on certain SSD or flash media)
  • OVERWRITE - One pass, 3 passes and 7 passes 5220.22-M. The duplicator writes a string of pattern over the entire disk one time, three times or seven times.5220.22-Mis the DoD standard for drive sanitization
• LCM control module provides a rich set of robust advanced configuration options (diagram of duplicator features can be hereFull LCD console feature list)
• Operate as a stand alone appliance. No computer or software needed

*The speed here is for reference only.The actual transfer rate varies depending on the speed of the source and destination drive

Components for the main unit
Storage Tower (ST9), 1:11 HDD Duplicator subsystem (HDU11SAS), six (6) units of the Snap-In Double Drive (AE25SNAP2SA),one 3.5" Snap-In SATA Mobile Rack II (AESNMRS)

Bundled accessories:twelve (12) unitsof 2.5" M2 flash drive adapters (AD25M2SSD-E), power cord, user guide

SPECIFICATIONS

• Writing mode: Sector to Sector
• Typicalcopying speed:

• Sturdy metal frame construction
• Drives are added or removed just like VHS cassette without tools
• LCD display with functional control panel
• Low noise high CFM ball bearing cooling fan
• Power consumption: 15 - 110 Watts (varies depending on the media)
• Integrated universal AC 110/240V power supply
• Dimension (W x L x H):~ 7.5 x 17.25 x 17.2 in. (90 x 438 x 437 mm.)
• Weight (main unit):~ 24.6 lb (11.16 Kg)
  
• Operating temperature and humidity: 0 - 50 degree C, 15% - 90% RH
• Storage temperature and humidity: (-20) - 65 degree C, 0% - 95% RH non-condensing