All stock codes associated to this product
KVR24E17S8/8I, 740617272178
Kingston KVR24E17S8/8I 8GB 1Rx8 1G x 72-Bit PC4-2400
CL17 288-Pin DIMM
Description
ValueRAM's KVR24E17S8/8I is a 1G x 72-bit (8GB) DDR4-2400 CL17 SDRAM
(Synchronous DRAM), 1Rx8, ECC, Intel Compatibility Tested, memory module, based
on nine 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard
latency DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses gold
contact fingers. The electrical and mechanical specifications are as follows:
Features
- Power Supply: VDD=1.2V Typical
- VDDQ = 1.2V Typical
- VPP - 2.5V Typical
- VDDSPD=2.41V to 2.75V
- Nominal and dynamic on-die termination (ODT) for data, strobe, and mask
signals
- Low-power auto self refresh (LPASR)
- Data bus inversion (DBI) for data bus
- On-die VREFDQ generation and calibration
- Single-rank
- On-board I2 serial presence-detect (SPD) EEPROM
- Temperature sensor with integrated SPD
- 16 internal banks; 4 groups of 4 banks each
- Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode
register set (MRS)
- Selectable BC4 or BL8 on-the-fly (OTF)
- Fly-by topology
- Terminated control command and address bus
- PCB: Height 1.23" (31.25mm)
- RoHS Compliant and Halogen-Free
Specifications
CL(IDD) |
17
cycles |
Row Cycle Time
(tRCmin) |
46.16ns(min.) |
Refresh to
Active/Refresh |
350ns(min.)
|
Command Time
(tRFCmin) |
|
Row Active Time
(tRASmin) |
32ns(min.) |
Maximum Operating
Power |
TBD W* |
UL
Rating |
94 V -
0 |
Operating
Temperature |
0 DegreeC to 85
DegreeC |
Storage
Temperature |
-55 DegreeC to +100
DegreeC |