All stock codes associated to this product
DV2862VAC, II29158, 4712909123662
DrayTek Vigor2862Vac Multi-WAN VDSL2/ADSL2+ Gigabit Firewall Router
Vigor2862 Series is a VDSL2/ADSL2+ Security Firewall router which is
compatible with variants of ADSL and VDSL, VDSL bonding is also supported on
model Vigor2862B and Vigor2862Bn. All the models have an RJ-11 DSL port, and a
Gigabit Ethernet WAN port which can be used with a cable-modem to connect to a
second line for load balancing or failover, there are also two USB ports which
can work with 3G/4G/LTE USB modems to add wireless connectivity. Vigor2862
Series features comprehensive firewall and content security management (CSM) to
secure the local network.It can also be a central management portal for Vigor
APs and Vigor Switches, providing Network Administrator a simpler way to
maintain all the network devices.
Comprehensive DSL Connectivity
The VDSL/ADSL modem built-in Vigor2862 Series is compatible with various
versions of xDSL, including ADSL, ADSL2, ADSL2+, VDSL, and VDSL2, automatically
fall back is also supported. The Vigor2862B and Vigor2862Bn also supports VDSL2
bonding, the technology that combines 2 VDSL lines into a aggregated connection
of double throughput, thus are compatible with the DSL services provided through
bonded VDSL.
WAN Load Balancing &Failover
Except for the DSL interface, there is also a Gigabit Ethernet WAN port that
can be used for any types of connection and add an additional connectivity to
share the traffic load. 3G/4G/LTE USB modem can also be attached to the USB
ports of the router, and offer wireless Internet connectivity in case the fixed
lines are not available, In fact, all of the WAN interfaces can be configured to
operated in either Load Balancing mode, which will be active all the time, or in
Failover mode, which will be active only when detecting connection loss or heavy
load on the primary connection.
On Vigor2862 Series, Load Balancing can be set in either IP-based mode, which
means the packets destined to different IP address will be distributed across
different WANs, or Session-based mode, which means the packets belong to
different sessions can take different paths, this allows a multiple-session
connection to be established across multiple WANs, and the maximum data rate
will be all the WAN's bandwidth combined. Policy-based Load Balancing is also
supported so that you may specify the path for some certain packets.
To increase network accessibility more, Vigor2862 Series also support High
Availability feature and allows one or more redundant Vigor2862B Series to be
added to the network and operated in standby mode.
Flexible LAN Management
The 4-port Gigabit Ethernet switch on the LAN side provides high-speed
connectivity for the servers and PCs on the local network, and the Virtual LAN
(VLAN) features allow you to separate the LAN clients into different logical
domains thus to increase the security and network efficiency. Vigor2862 Series
support 802.1Q standard and can build a Tag-based VLAN system with an
802.1Q-support switch, Port-based VLAN is also supported that each LAN port can
be configured as a member of different VLAN and be isolated from each other
without the use of VLAN tag. Moreover, up to 8 IP subnet can be set up on
Vigor2862 Series, so each VLAN can use different IP addressing space.
Vigor2862 Series has implemented an integrated solution to work as a public
Wi-Fi hotspot. While providing Internet access to the guest users, the Hotspot
Web Portal can be used to collect the users' information, informing the terms
and conditions, and presenting a landing page to them.
Firewall &Security
Vigor2862 Series support Stateful Packet Inspection (SPI) Firewall and
flexible filtering rules, it can accept or deny packets based on the information
in the packet header (such as source IP, destination IP, protocol, and port
number) or the packet's application. IP-based restrictions can be set to filter
certain HTTP traffic as well as various application software and help you to
prevent time and network resource wasting on inappropriate network
activities.
With an annual subscription to Cyren Web Content Filtering service, you may
also filter the websites by their categories, and set up restrictions to block
the whole categories of websites (such as Social Networking, Gambling.. etc.)
without the need to specify every site you would like to block. The Cyren
service is constantly updating the categorization, and a free 30-day trial is
included in every new router.
The Vigor2862 Series firewall also includes DoS (Denial of Service) Defense
to protect the network against variants of attacks.
Comprehensive VPN
Vigor2862 Series support both LAN-to-LAN VPN and Remote Dial-in VPN, up to 32
VPN tunnels can be set up simultaneously. All the industry standard tunneling
protocols are supported, including PPTP, L2TP, IPsec, and GRE, and it's
compatible with 3rd party VPN devices.
Vigor2862 Series also support SSL VPN - a type of VPN based on the very
common encryption method which is used by all the HTTPS websites. While the
traditional VPN protocols might be filtered by the firewall and NAT of public
networks, SSL VPN will be passed as long as the HTTPS is allowed. DrayTek also
offers free official client App for Windows, iOS, and Android.
VPN Trunking is also supported by Vigor2862 Series, this allows you establish
two VPN tunnels to the same remote site but through different WAN interfaces.
The two trunking tunnels can be set up in load balancing or failover mode.
Central Management
Vigor2862 Series can act as a Central Management portal for all the Vigor
devices on the network, including VigorAPs, Vigor Switches, and even Vigor
Routers. With Central Management feature, device maintenance (such as firmware
upgrading, configuration backup and restore) and monitoring can all be done from
a single portal, which is the Web User Interface of Vigor2862 Series.
Vigor2862 Series can manage up to 20 VigorAP on its LAN. Automatic
Provisioning can be triggered when a VigorAP newly join the network and this
makes AP deployment much faster. You may also get the client or traffic history
of all the AP from Vigor2862B Series, and set up load balancing rules for the
AP.
Central Switch Management allows you to manage up to 10 Vigor Switches from
Vigor2862 Series, the status of every port can be directly viewed from the
router. Vigor2862 Series also support VLAN configuration for the switches,
setting that matches the router's VLAN settings and the switch hierarchy is
automatically provided which makes the VLAN configuration much simplified.
Models
Model |
Vigor2862 |
Vigor2862Bn |
Vigor2862B |
Vigor2862Bn |
Vigor2862ac |
Vigor2862Vac |
Product |
|
|
|
|
|
|
VDSL Bonding |
|
|
Yes |
Yes |
|
|
2.4G Wireless |
|
Yes |
|
Yes |
Yes |
Yes |
5G Wireless |
|
|
|
|
Yes(802.11ac support) |
Yes (802.11ac support) |
VoIP |
|
|
|
|
|
Yes |
Features
- 1 VDSL2/ADSL2+ RJ-11 WAN Port
- 1 Gigabit Ethernet WAN Port
- 2 USB ports for 3G/4G cellular modem, network storage, or USB temperature
sensor
- Up to 4 WAN for Load Balancing or Failover
- VDSL2 Bonding Support (B/Bn model)
- 802.11ac Wave 2 dual-band wireless for speed up to 1.7 Gbps (ac/Vac model)
- 32 Simultaneous VPN Tunnels for remote offices or teleworkers
- SPI Firewall with Content Filtering
- Central Management for VigorAP &Vigor Switch
ADSL
- ANSI T1.413 (ADSL)
- ITU G.992.1 G.dmt (ADSL)
- ITU G.992.2 G.lite (ADSL)
- ITU G.992.3 (ADSL2)
- ITU G.992.3 Annex M/J (ADSL2)
- ITU G.992.5 (ADSL2+)
- AITU G.992.5 Annex M/J (ADSL2+)
VDSL
- ITU G.993.1 (VDSL), ITU-T G997.1
- ITU G.993.2 (VDSL2)
- VDSL Band Plan: 997, 998
- VDSL2 Profile: 8a, 8b, 8c, 8d, 12a, 12b, 17a, 30a
WAN
- Support fallback to ADSL2/2+ when fail to connect in VDSL2
- xDSL WAN
- DHCP Client
- Static IP
- PPPoE (and pass through)
- PPPoA
- MPoA
- 802.1p/q VLAN Tagging
- Default VLAN/PVC profile by region
- Giga Ethernet WAN
- DHCP Client
- Static IP
- PPPoE
- PPTP
- L2TP
- 802.1q VLAN Tagging
- USB WAN
- Support PPP / DHCP mode (for 3G/4G)
Dual WAN
- Load Balance and Route Policy : 50 profiles
- WAN connection failover
- Multiple-VLAN
LAN
- Support IPv6 LAN
- Port-based / Tag-based VLAN
- Bind IP to MAC Address
- Disable / Enable / Strict Bind
- IP Bind list: 1024 entries
- LAN Port Mirror
- Wired 802.1x
- Web Portal
- Support IP Pool Count more than 253 (up to 1022) for LAN1~3 subnet
- 8 x Multiple Subnet LAN
Firewall
- NAT
- DMZ Host (for DSL / GbE / Backup WAN)
- Port-Redirection (40 profiles)
- Open Port (40 profiles)
- Port Trigger (20 profiles)
- Object-based Firewall (v3)
- SPI (Stateful Packet Inspection) (Flow Track)
- DoS Defense
- E-Mail alert (DoS Attack/APPE) and logging via syslog
- Time Schedule Control
- User Management
- User-based / Rule-based
- Up to 200 Profiles
- Support external authentication by LDAP/RADIUS/TACACS+
- Support Data-base &Time-base Quota
- Schedule Control to delete or disable account automatically
CSM
- Service Activation Wizard
- APP Enforcement (IM/P2P Application v3)
- Up to 32 Profile
- APPE Signature Upgrade
- URL ContentFilter :
- URL Access Control (Keyword Blocking)
- Pass / Block Web Feature(Cookie, Proxy, Upload File extension)
- Support File Extension Object: Image, Video, Audio, Java, Active X,
Compression, Execution, P2P
- WEB Content Filter
- Service activation wizard in main bar
- Support Cyren / BPjM
- White/Black list for Keyword Object/Group
- DNS Filter for WCF/UCF
VPN
- 32 Simultaneous VPN
- Protocol: PPTP, IPsec, L2TP, L2TP over IPsec
- Encryption: MPPE and Hardware-based AES/DES/3DES
- Authentication: MDS, SHA-1
- IKE Authentication: Pre-shared Key and Digital Signature (X.509)
- LAN-to-LAN, Teleworker-to-LAN(Remote Dial-in User)
- DHCP over IPSec
- IPSec NAT-Traversal (NAT-T)
- Dead Peer Detection (DPD)
- VPN Pass-Through
- VPN Wizard
- mOTP
- SSL VPN : 16 Tunnels
- Support TLS/SSL Encryption v3.0
- VPN Trunk with Load Balance / Backup
Routing
- Static Route (IPv4 up-to 30 entries / IPv6 up-to 40 entries)
- RIPv2
- Policy-based Routing
- Inter-VLAN Routing
Bandwidth Management
- Bandwidth Limitation
- Session Limitation (Up to 20 lists)
- QoS (Quality of Service)
- Guaranteed bandwidth for VoIP
- Class-based Bandwidth Guaranteed by user-defined traffic categories
- DiffServ Code Point classifying
- 4-level priority for each direction (Inbound/Outbound)
- Layer-3 (TOS/DSCP) QoS Mapping
- APP QoS
Central Management
- AP Management: 20 (independent with External Device feature)
- VPN Management : 8
- External Devices : 30
Network Feature
- Packet Forwarding Acceleration (Default is disabled)
- DHCP Client/Relay/Server
- DHCP Option: 1,3,6,51,53,54,58,59,60,61,66,125
- IGMP Proxy V2/V3
- IGMP Snooping
- Dynamic DNS
- LAN DNS / DNS Forwarding
- DNSSEC
- NTP client
- Call Scheduling
- RADIUS / TACACS+ client
- Internal RADIUS server
- Active Directory /LDAP compatible (client)
- DNS Cache/Proxy
- UPnP 50 sessions
- Wake on LAN
- Bonjour service
- Support SmartMonitor (Up to 30 PCs)
System Management
- Web-based user interface (HTTP/HTTPS)
- Quick Start Wizard
- Dashboard
- CLI (Command Line Interface, Telnet/SSH)
- Administration access control
- Login Page Greeting
- Configuration backup/restore
- Built-in diagnostic function
- Firmware upgrade via TFTP/FTP/HTTP/TR-069
- Logging via syslog
- SNMP V2/V2c/V3
- Data Flow Monitor
- Support SMS/E-mail Alert
- External Device (Master Mode)
- TR-069
- TR-104
- Support Multi-Firmware Upgrade Utility
- Two-level management (admin/user mode)
USB
- Printer Sharing
- File System
- Support FAT32 file system
- Support FTP function for file sharing
- File explorer
- Support Samba for file sharing (DrayTeks own SMB protocol stack)
- Support USB Temperature Sensor
- Support USB Device Status for Disk, Modem, Printer and Sensor
- 3.5G (HSDPA) and 4G (LTE) as WAN3/WAN4 by using USB dongle
Wireless AP(n/Bn/ac/Vac model)
- Support Single 2.4G (n/Bn model)
- Support Simultaneous 2.4G/5G Dual-Band (ac/Vac model)
- Auto channel selection
- Multiple SSID
- Hidden SSID
- Wireless LAN Isolation
- Wireless Rate-Control
- 64/128-bit WEP
- WPA/WPA2
- MAC Address Access Control (Total 64 entries)
- WPS
- WDS (Wireless Distribution System)
- WMM
- Access Point Discovery
- 802.1x Authentication
- Station List / Control
- Wireless Wizard
- SSID VLAN grouping with LAN port (Port-based VLAN)
VoIP (Vac model)
- Protocol: SIP, RTP/RTCP
- VoIP Wizard
- VoIP Status
- 12 SIP Registrars
- G.168 Line Echo-cancellation
- Automatic Gain control
- Jitter Buffer
- Voice codec:
- G.711
- G.723.1
- G.726
- G.729 A/B
- VAD/CNG
- DTMF Tone :
- Inband
- Outband (RFC-2833)
- SIP Info
- FAX/Modem Support :
- Tone Detection
- G.711 Pass-through
- T.38 for FAX
- Supplemental Services :
- Internal Call (dial 10 or 20 for Phone 1 or Phone 2. Only for debug
usage)
- Call Hold/Retrieve/Waiting
- Call Waiting
- Call Waiting with Caller ID
- Call Transfer
- Call Forwarding (Always, Busy and No Answer)
- CLIR (Calling Line Identification Restriction)
- Call Barring (Incoming/Outgoing)
- DND (Do Not Disturb)
- MWI (Message Waiting Indicator) (RFC-3842)
- Hotline
- ZRTP
- PSTN Loop-through When Power Failure
- Dial Plan :
- Phone Book
- Digit Map
- Call Barring
- Regional
- PSTN Setup
Specifications
Hardware Interface |
1 x ADSL2/VDSL2, RJ-11 (WAN-1) |
|
1 x 10/100/1000Base-TX, RJ-45 (WAN-2) (for standard
) |
|
4 x 10/100/1000Base-TX LAN, RJ-45,Configurable Physical DMZ on
Port4 |
|
2 x USB Host 2.0 |
|
1 x Factory Reset Button |
|
2 x Detachable Antennas(n/Bn model) |
|
4 x Detachable Antennas(ac/Vac model) |
|
1 x Wireless On/ Off/ WPS Button(n/Bn/ac/Vac
model) |
Dimension |
L241*W165*H44 (mm) |
|
|
Wi-FiFrequency |
|
11b/g/n |
2.412~ 2.462GHz (USA) |
|
2.412~ 2.472GHz (Europe ETSI) |
|
|
11a/n/ac |
5.150 5.250 &5.725 5.825 GHz (USA) |
|
5.150 5.250 &5.470 5.725GHz (Europe ETSI) |
|
|
Wireless Transmit Power |
|
2.4GHzMax |
19 dBm |
5 GHz Max |
29 dBm |
|
|
Operating Requirement |
|
Operating |
0 degree C ~ 45 degree C |
Storage |
-25 degree C ~ 70 degree C |
Humidity |
10% ~ 90% (non-condensing) |
Power |
DC 12V @ 1.5A ~ 2A |
Power Consumption |
19~24 watt |