HX436C17PB3K2/16 | Kingston 16GB (2x8GB) PC4-28800 3600MHz DDR4 SDRAM - 17-18-18

Kingston HX436C17PB3K2/16 16GB (8GB 1G x 64-Bit x 2 pcs.) DDR4-3600 CL17 288-Pin DIMM

Description

HyperX HX436C17PB3K2/16 is a kit of two 1G x 64-bit (8GB) DDR4-3600 CL17 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module kit supports Intel Extreme Memory Profiles (Intel XMP) 2.0. Total kit capacity is 16GB. Each module has been tested to run at DDR4-3600 at a low latency timing of 17-18-18 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows:

XMP TIMING PARAMETERS

• JEDEC: DDR4-2400 CL17-17-17 @1.2V
• XMP Profile #1: DDR4-3600 CL17-18-18 @1.35V
• XMP Profile #2: DDR4-2666 CL15-17-17 @1.35V

Features

• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP - 2.5V Typical
• VDDSPD = 2.25V to 3.6V
• On-Die termination (ODT)
• 16 internal banks; 4 groups of 4 banks each
• Bi-Directional Differential Data Strobe
• 8 bit pre-fetch
• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
• Height 1.661" (42.20mm)

Specifications