All stock codes associated to this product
KVR24R17D4/16I, MEKVR24R17D416I, 740617257519, 740617257496
Kingston KVR24R17D4/16I 16GB 2Rx4 2G x 72-Bit PC4-2400
CL17 Registered w/Parity 288-Pin DIMM
Description
ValueRAM's KVR24R17D4/16I is a 2G x 72-bit (16GB) DDR4-2400 CL17 SDRAM
(Synchronous DRAM) registered w/ parity, 2Rx4, ECC, Intel Compatibility Tested,
memory module, based on thirty-six 1G x 4-bit FBGA components. The SPD is
programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V. Each
288-pin DIMM uses gold contact fingers. The electrical and mechanical
specifications are as follows:
Features
- Power Supply: VDD=1.2V (1.14V to 1.26V)
- VDDQ = 1.2V (1.14V to 1.26V)
- VPP - 2.5V (2.375V to 2.75V)
- VDDSPD=2.25V to 2.75V
- Functionality and operations comply with the DDR4 SDRAM datasheet
- 16 internal banks
- Bank Grouping is applied, and CAS to CAS latency (tCCD_L, tCCD_S) for the
banks in the same or different bank group accesses are available
- Data transfer rates: PC4-2400, PC4-2133, PC4-1866, PC4-1600
- Bi-Directional Differential Data Strobe
- 8 bit pre-fetch
- Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
- Supports ECC error correction and detection
- On-Die Termination (ODT)
- Temperature sensor with integrated SPD
- This product is in compliance with the RoHS directive.
- Per DRAM Addressability is supported
- Internal Vref DQ level generation is available
- Write CRC is supported at all speed grades
- CA parity (Command/Address Parity) mode is supported
Specifications
CL(IDD) |
17
cycles |
Row
Cycle Time (tRCmin) |
46.16ns(min.) |
Refresh
to Active/Refresh |
260ns(min.) |
Command
Time 1x mode (tRFCmin) |
|
Row
Active Time (tRASmin) |
32.00ns(min.) |
Maximum
Operating Power |
TBD
W* |
UL
Rating |
94
V - 0 |
Operating
Temperature |
0o
C to +85o C |
Storage
Temperature |
-55o
C to +100o C |