Serial |
4 x Programmable Bi-directional RS-232/422/485
Port |
|
(4 x DB9 Male Connector, configurable via pin
assignments); |
|
- Baud Rate: 300 to 115200 (default: 9600); |
|
- Data Bit: 8 (default) or 7; |
|
- Stop Bit: 1 (default) or 2; |
|
- Parity: None (default), Even or Odd; |
|
- Flow Control: None (default) RTS/CTS |
|
2 x Bi-directional RS-232 Port |
|
(2 x 3-Pole Terminal Block Connector); |
|
- Baud Rate: 300 to 115200 (default: 9600); |
|
- Data Bit: 8 (default) or 7; |
|
- Stop Bit: 1 (default) or 2; |
|
- Parity: None (default), even or odd |
IR/Serial |
4 x Programmable IR / Uni-directional RS-232 Port |
|
(2 x 4-Pole Terminal Block Connector); |
|
IR: TTL level (0 to 5 V) |
|
- Carrier Frequency: 10KHz~455KHz; |
|
Serial: Uni-directional RS-232 ( + - 5 V) |
|
- Baud Rate: 300 to 115200 (default: 9600); |
|
- Data Bit: 8 (default) or 7; |
|
- Stop Bit: 1 (default) or 2; |
|
- Parity: None (default), Even or Odd |
I/O |
4 x Programmable Digital Input / Output Channel |
|
(1 x 5-Pole Terminal Block Connector); |
|
Digital Output: |
|
250 mA sink from 12 VDC |
|
Digital Input: |
|
- VDC Mode |
|
Input Voltage Range: 0 to 24 VDC; |
|
Programmable Range: 1 to 24 VDC; |
|
- Dry Contact Mode |
|
Pull-up 2k ohms to + 12 VDC |
Relay |
4 x Relay Channel (2 x 4-Pole Terminal Block
Connector); |
|
Normally open, isolated Relays; |
|
Contact Rating: Max 24 VDC, 2A |
VDC |
4 x 12 VDC Output Port (2 x 4-Pole Terminal Block
Connector); |
|
Power Supply: 12 VDC, 2A Max (shared by 4 ports) |
Ethernet |
1 x RJ-45 Female, 10/100Base-T |
|
Supported Protocol: ICMP, TCP/IP, DHCP, HTTPS, SSH |
|
DHCP-enabled. The following default IP settings will be used if no IP
is assigned within 30 seconds: |
|
IP: 192.168.0.60 |
|
Subnet Mask: 255.255.255.0 |
|
Establishes VK2100 connection with the VK6000 (ATEN Configurator) and
iPad (ATEN Control System App) |
Control |
Controller ID: 1 x 16-segment Switch |
|
Power: 1 x On/Off Switch |
IR Learning |
1 x IR Receiver LED |
Reset Button |
1 x Semi-recessed Pushbutton |
USB |
1 x USB Type A |
Power |
Consumption: 40 Watt |
|
Maximum Input Power Rating: Internal Power: 100-240 VAC, 50-60
Hz |
|
|
Environmental |
|
Operating Temperature |
32-122F (0 - 50C) |
Storage Temperature |
-4-140(-20 - 60C) |
Humidity |
0 - 80% RH, Non-Condensing |
|
|
Physical |
|
Housing |
Metal |
Weight |
2.64 kg ( 5.81 lb ) |
Dimensions |
(L x W x H) 17.21 x 6.43 x 1.73 in. (43.72 x 16.32 x 4.40
cm) |