All stock codes associated to this product
M2MSHD9H2S, M2MSHD9H-2S
Addonics 1:9 M2/mSATA/SSD/HDD Duplicator PRO
The Addonics family of Combo mSATA HDD duplicator is designed for making
multiple copies of mSATA SSD or 2.5" SATA HDD/SSD from a single master drive.
Each duplicator comes bundled with a set of 2,5" mSATA flash drive kit that
turns a mSATA SSD into a 2.5" SATA SSD. You can mix and match the mSATA SSD and
the hard drive into the duplicator, thus making it a handy tool for transferring
the content between the mSATA card and 2.5" hard drive. There is no computer
needed or complex software to operate. Just open the doors on the drive bays,
load the master media into the source bay and the target media of capacity equal
or larger into the target bays, lock the drive doors and push the start button
to start the copying process.
About this model
This 1:9 mSATA /SSD/HDD HS Duplicator PRO allows you to copy from one source
media onto as many as nine (9) target media at one time. Comes bundled with ten
(10) M2/mSATA flash drive kits to convert either M2 SATA or mSATA SSD into a
2.5" SSD, the target and source drive can be of either M2 SATA SSD, mSATA SSD or
2.5" SATA HDD/SSD. In addition, there is a source slot for using 3.5" hard drive
as a master drive, a great solution for transferring content on 3.5" SATA hard
drive to M2 SATA SSD, mSATA SSD or 2.5" SATA HDD. By adding other optional 2.5"
flash drive adapters, the supported media can be expanded to include CFast card,
CF card, slim SATA SSD and 1.8" HDD/SSD. Designed with snap-In drive bay, drives
are easily added or removed without any special tool, just like an ordinary
cassette tape.
Duplicator overview
Installing the M2 SATA SSD onto the 2.5" M2/mSATA flash drive
kit
Installing the mSATA card onto the 2.5" M2/mSATA flash drive
kit
Features
- Copy up to nine (9) of the following type of media: M2 SATA SSD,
mSATA/mini mSATA SSD or 2.5" SATA HDD/SSD with drive thickness up to 9.5 mm
- Supported source media: M2 SATA SSD, mSATA/mini SATA SSD, 2.5" SSD, 2.5"
hard drive and 3.5" hard drive
- Comes with ten (10) units of M2/mSATA flash drive
kits(AD25M2MSA)to convert M2 SATA SSD or mSATA
SSD to 2.5" SATA SSD
- An easy source switch at the back of the unit for selecting 3.5" HDD or
2.5" HDD as the source slot
- Additional support for CFast, CF, slim SATA SSD and 1.8" HDD/SSD with the
following optional 2.5" flash drive kit -
AD25CFASTD-N,AD25CFD-N,AA25SEMBK,AD18M25S
- Maximum copying speed ~ 120MB/sec with no performance degradation
from increased loading
- Support any file system
- No drive capacity limitation
- Source and Destination drives are added or removed like tape cartridges
from each drive bay with no special tool required
Drive sanitization:
- SECURE ERASE - HDD duplicator sends a WIPE command to the hard drive. This
command fills 00 string to entire HDD (this option may not be supported on
some SSD or mSATA card)
- OVERWRITE - One pass, 3 passes, and 7 passes 5220.22-M. The duplicator
writes a string of pattern over the entire disk one time, three times or seven
times. 5220.22-M is the DoD standard for drive
sanitization
- LCM control module provides a rich set of robust advanced configuration
options (diagram of duplicator features can be here Full LCD console
feature list)
- Operate as a stand-alone appliance. No computer or software needed
* The speed here is for reference only. The actual transfer rate varies
depending on the speed of the source and destination
drive
Bundled accessories: ten (10) units of 2.5" M2/mSATA flash
drive kit (AD25M2MSA), power cord, user guide
Specifications
- Writing mode: Sector to Sector
- Maximum copying speed ~ 120 MB/sec
- Sturdy metal frame construction
- Drives are added or removed just like VHS cassette without tools
- LCD display with a functional control panel
- Well ventilated for efficient air flow.
- Two low noise high CFM ball bearing cooling fan
- Integrated universal AC 110/240V power supply
- Dimension: ~7.5 x 17.25 x 17.2 in. (90 x 438 x 437 mm.)
- Weight:~ 23.93 lb (10.85 Kg)
- Operating temperature and humidity: 0 - 50 degree C, 15% - 90% RH
- Storage temperature and humidity: (-20) - (65) degree C, 0% - 95% RH
non-condensing