All stock codes associated to this product
GS5208PLG, GS-5208PLG, NWEGS5208PLG, NWE-GS-5208PLG, 4717964702708
Edimax GS-5208PLG 8-Port Gigabit PoE+ With 2 SFP Slots
Web Smart Switch
Features
- IEEE 802.3af/at PoE compliant.
- Eight Gigabit Ethernet ports.
- Up to 30W per port (total power budget: 160W) for powering PoE-enabled
devices.
- Auto-detection of powered devices (PD) and power consumption levels.
- Auto fault-detection on over/under current &voltage.
- Access Control List (ACL) support.
- Switch capacity:20Gbps &Forwarding rate:14.88Mpps.
- IEEE 802.1Q-based VLAN for network segmentation to improve performance and
security.
- IEEE 802.1p QoS with 4 priority queues
- IGMP Snooping V1 / V2 / V3 support.
- 4K MAC address table and jumbo frame support up to 9KB.
- 19-inch 1U rack-mount brackets included.
Overview
The Edimax Pro GS-5208PLG is a web-smart switch with 8 Gigabit PoE+ and 2
Gigabit SFP slots. Designed for medium to small network environments, its
standard 19-inch 1U rack-mount brackets allow for integration with the most
widely used mounting systems on the market. The Edimax GS-5208PLG is a superb
choice to boost your network environment’s performance and efficiency.
IEEE 802.3at/af Power over Ethernet Standard
The GS-5208PLG features 8 IEEE 802.3at Power over Ethernet (PoE+) ports which
supply up to 30W of electricity per port, and has a total power supply of 160 W
to power any 802.3at or 802.3af compliant power device. With PoE detection
capability, the GS-5208PLG is able to verify whether the connected device is
IEEE 802.3at or 802.3af compliant. In the event that a PoE device is not
detected, only network data will be transmitted through the LAN cable. The
GS-5208PLG can be used with different PoE products such as access points,
network cameras or VoIP devices and is an effective solution for network
environments where power outlets are difficult to access.
PoE for Easy Installation and Better Cost Efficiency
Power over Ethernet technology enables the Ethernet cable to carry both data
and power, reducing cable installation and eliminating the need for extension
cords or electrical outlets on the walls and ceiling. Overall the GS-5208PLG can
lower installation costs and simplify the deployment effort.
Power-Budget User Interface for PoE Device Management
The GS-5208PLG features an innovative power-budget UI (user interface) which
allows IT managers to monitor the power consumption of each PoE port and the
total power consumption of connected PoE devices. Monitor the entire PoE network
and assess the total power usage before adding new PoE devices to the network
architecture. The power-budget UI also features a remote on/off function for
each PoE port, so manual plug/unplug isn’t necessary when a PoE device hangs.
Simply use the remote power button to quickly reset the device.
Smart Tools for Improved Network Efficiency
The GS-5208PLG features smart network monitoring tools that allow for
improved network efficiency. Security and management features include bandwidth
control and VLAN (IEEE 802.1Q VLAN). Using its web-based interface,
administrators can set up VLANs to segregate traffic and configure link
aggregation settings to create fat traffic pipelines. Additionally, these
features offer extra protection on the network edge and the password-protected
configuration interface can be accessed remotely.
APPLICATION DIAGRAM
Specifications
HARDWARE |
|
Ports |
8
Port RJ-45 10/100/1000Base-T PoE+ Ports |
|
2
Port 1000Base-X SFP slots |
Transmission
Method |
Store
and forward |
Buttons |
Reset
button |
|
|
LED
Indicators |
|
PoE |
Act/Status |
Per
Port |
Link/Act |
Per
Unit |
Power |
Power
Input |
100-240V
AC, 50-60 Hz, internal power supply |
Total
Power Budget |
160W
|
Dimensions
(L x W x H) |
265
× 184 × 44 mm |
Weight |
1.7kg |
|
|
PERFORMANCE |
|
Switching
Capacity |
20Gbps
|
Forwarding
Rate |
14.88Mpps |
MAC
Address |
4K |
Buffer
Memory |
192KB |
Jumbo
Frames |
9.2KB |
Filtering/Forwarding
Rates |
1000Mbps
port – 1,488,000pps |
|
100Mbps
port - 148,800pps |
|
10Mbps
port - 14,880pps |
|
|
POWER
OVER ETHERNET |
|
Standard |
IEEE
802.3af, IEEE 802.3at |
Power
Output |
Up
to 30W per port |
Pin
Assignment |
1/2(+),
3/6(-) End-Span (mode A) |
Available
Power Budget |
130W |
Management |
PoE
ouput on/off management |
|
|
SMART
FEATURES |
|
VLAN |
Up
to 8 VLANs and 4096 VLAN IDs |
|
802.1Q
tag-based VLAN |
Port
Trunking |
IEEE
802.3ad LACP Trunk-Static trunk up to 1 trunk groups |
IGMP
Snooping |
IGMP
v1/v2/v3 snooping |
|
Block
unknown multicast traffic |
|
Multicast
groups: 128 |
QoS |
Port-based
QoS, IEEE802.1p QoS, 4 Priority Queues, scheduling
algorithm |
Management |
User
Interface: Web-based management |
|
User
Account: Login account configuration |
|
Firmware
Upgrade: Firmware upgrade by WEB |
|
Loop
Detection/Prevention |
Security |
Broadcast
Storm control |
|
|
ENVIRONMENT |
|
Temperature |
Operating:
0 ~ 40 |
|
Storage:
-40 ~ 70 |
Humidity
(Non-condensing) |
Operating:
10 ~ 90% |
|
Storage:
5 ~ 90% |
|
|
STANDARDS
COMPLIANCE |
|
Standards |
IEEE
802.3 10BaseT Ethernet |
|
IEEE
802.3u 100BaseTX Fast Ethernet |
|
IEEE
802.3ab 1000BaseT Gigabit Ethernet |
|
IEEE
802.3x Full-duplex and Flow Control |
|
IEEE
802.3ad Link Aggregation Control Protocol (LACP) |
|
IEEE
802.3az Energy Efficient Ethernet |
|
IEEE
802.1Q VLAN |
|
IEEE
802.1p Quality of Service (QoS) |
|
IEEE
802.3af Power Over Ethernet (PoE) |
|
IEEE
802.3at Power Over Ethernet Plus (PoE+) |
|
|
Certifications |
FCC
Class A, CE |