All stock codes associated to this product
CLW207CU00TRA, CL-W207-CU00TR-A
Thermaltake Pacific M4 Motherboard Water Block - For ASUS TUF X299
MARK I Motherboard
Support ASUS Aura Sync, the Pacific M4 is an all-in-one (CPU and motherboard)
water block with a RGB LED module for ASUS TUF X299 MARK I motherboard. The
water block utilizes a bigger cold plate along with 0.15mm micro-channel fin
construction, allowing coolant to flow directly over all critical areas as well
as providing the ultimate in cooling performance for Intel socket LGA-2066 type
CPU.
Tt LCS Certified
Tt LCS Certified is a Thermaltake exclusive certification applied to only
products that pass the design and hardcore enthusiasts’ standards that a true
LCS chassis should be held to. The Tt LCS certification was created so that we
at Thermaltake can designate to all power users which chassis have been tested
to be best compatible with extreme liquid cooling configurations to ensure you
get the best performance from the best features and fitment.
RGB LED Design
The built-in LED module features great light coverage, uniform color and
brightness, and is compatible with ASUS Aura Sync.
Control with ASUS Aura Sync
Designed to synchronize with ASUS Aura Sync, the RGB LED module supports ASUS
TUF X299 MARK I motherboards that have an Aura RGB Header, allowing you to
control the lights directly from the software without installing any extra
lighting software or controllers. For more details, please visit ASUS official
website.
Comprehensive Cooling Solution
Made in Taiwan, the Pacific M4 is a comprehensive liquid cooling solution,
directly covering Intel LGA-2066 socket type CPU and power regulation (MOSFET)
module. The full block has G1/4 thread ports to accept any of the industry
standard fittings, and comes with all required mounting hardware
Optimized Micro-Channel Structure
The Pacific M4 is designed with a compact form factor, featuring 0.15mm
micro-channel fin construction for optimal clearance and extreme heat
dissipation.
Remarkable Expansion
Crafted for Intel LGA-2066 CPU socket, the Pacific M4 allows enthusiasts to
build superior water cooling systems from an aesthetic standpoint as well as
incorporate modular chassis upgrades for the future.
Caution
Thermaltake recommends the following steps to be taken before using
the Pacific series radiators and water blocks
- To ensure a clean loop, flush and rinse your radiators and water blocks
with distilled water prior to use.
- Do not use tap water or distilled water as your coolant, it may harm your
loop and reduce performance.
- It is strongly recommended to use market proven pre-mix coolant, such as
Thermaltake Coolant 1000. It offers great performance while protecting the
entire liquid loop from corrosion.
- Before storing your water cooling components, please clean, rinse and dry.
This will ensure a longer lifespan for your components.
Thermaltake recommends the following steps to be taken after
completing your water loop setup
- It is strongly recommended to use market proven pre-mix coolant, such as
Thermaltake Coolant 1000. It offers great performance while preventing the
entire cooling system copper, brass, nickel, aluminum, and steel from
corrosion.
- Fill the reservoir with coolant and cycle the power on and off several
times while the pump pushing the coolant into the loop.
- DO NOT let the pump run dry, when there is no liquid entering the pump
turn off your power immediately
- Fill the reservoir to the top as it will prevent air from going into the
pump
- If necessary tilt the system slightly from side to side to bleed the air
out of the loop.
- Place some paper towels under fittings and joining points to test for
leaks.
- Run the loop with the fill port open for about 24 hours to completely
bleed the air out of the loop
- Before starting, flush out your system correctly to prevent any coolant or
unwanted particles sticking to your tubes, radiators and other cooling
components.
- Coolant might fade over time.
Specifications
P/N |
CL-W207-CU00TR-A |
Compatibility |
Intel LGA 2066 |
|
ASUS TUF X299 MARK I |
Dimension |
154 (L) x 114 (W) x 29.4 (H) mm |
Material |
Copper + PMMA |
Threads |
G¼” |
Rated Voltage |
12 V |
Power Input |
2.4 W |
Interface |
ASUS AURA SYNC (12V 4Pin) |
Weight |
770g |