All stock codes associated to this product
IEM30008FM=, IEM-3000-8FM=, 882658187827
Cisco IEM-3000-8FM= Industrial Ethernet 3000 Layer
2/Layer 3 Series Switches
Overview
The CiscoIndustrial Ethernet 3000 Series (IE 3000 Series) is a
family of Layer 2 and Layer 3 switches that bring Ciscos leadership in switching
to Industrial Ethernet applications with Innovative features, robust security,
and superior ease of use. The Cisco IE 3000 Series features
- Industrial design and compliance
- Tools for easy deployment, management, and
replacement
- Network security based on open standards
- Integration of IT and industrial automation
networks
The Cisco IE 3000 Series is an ideal product for Industrial
Ethernet applications, including factory automation, energy and process control,
and intelligent transportation systems (ITSs).
The Cisco IE 3000 offers:
- Design for Industrial Ethernet applications, including
extended environmental, shock/vibration, and surge ratings; a complete set of
power input options; convection cooling; and DIN-rail or 19 rack
mounting
- Support for Power over Ethernet (PoE) up to 15.4W per
port
- Support for Power over Ethernet Plus (PoE+) for the PoE+
capable devices up to 30W per port
- Easy setup and management using the Cisco Device Manager web
interface and supporting tools, including Cisco Network Assistant (CNA) and
Cisco Prime LMS 4.2
- Easy switch replacement using removable memory, allowing
the user to replace a switch without having to
reconfigure
- High availability, guaranteed determinism, and
reliable security using Cisco IOSSoftware
- Recommended software configurations for
industrial applications that can be applied at the touch of a
button
- Compliance to a wide range of Industrial
Ethernet specifications covering industrial automation, ITS, substation,
railway, and other markets
- Support for IEEE1588v2, a precision timing
protocol with nanosecond-level precision for high-performance
applications
- Improved ring resiliency with the
support of Resilient Ethernet Protocol
(REP)
- Transparent IT integration with the
support of Layer 3 routing protocols (IP
Services)
- PROFINET v2 certification, with
PROFINET conformance class B
compliance
- ABB Industrial IT
certification
Configurations
The Cisco IE 3000 Series software,
based on Cisco IOS Software, is a rich suite of intelligent services, supporting
high availability, quality of service (QoS), and security
features.
The Cisco IE 3000 Series includes
the following products:
Table 1. Cisco IE
3000
Switches
|
Cisco
IEM-3000-8FM= |
-
Expansion FX
Fiber Module for Cisco IE-3000-4TC, IE-3000-8TC, IE-3000-4TC-E, and
IE-3000-8TC-E switches, eight 100 FX
ports |
 |
|
Industrial
Ethernet Applications
The new Cisco IE 3000 Series
is an ideal product for a variety of Industrial Ethernet
applications:
- Industrial
automation:
- The Cisco IE 3000 is
designed to support a wide array of Industrial Ethernet protocols for
automation. The Cisco IE 3000 features a programmable logic controller (PLC)
form-factor design with extended environmental ratings, convection cooling,
DIN-rail mounting, redundant 24VDC power input, alarm relays, and
surge/noise immunity. The Cisco IE 3000 software and configuration tools
allow for easy setup, optimized for Industrial Ethernet applications (for
example, EtherNet/IP). Multicast control, traffic prioritization, and
security features are specified in default templates recommended for these
protocols
- ITS:
- The Cisco IE 3000
supports ITSand other applicationsfor outdoor video and traffic
or transportationsystems control. The switch supports compliance to
NEMATS-2,a variety of gigabit fiberuplinks, andAC
and DC power input options,while Cisco IOS Software supports critical
ITS features, including virtualLAN (VLAN),QoS, Internet Group
Management Protocol (IGMP) snooping, and security access controllists
(ACLs).
- Substations:
- The
Cisco IE 3000 is fullycompliant to substation automation
specifications, includingIEC61850 and IEEE1613. The switch supports
high-speed ring recovery; fiber access and uplink ports;AC,DC,
and a varietyof power input optionsfor the substation
environments.
- Other
applications:
- The
Cisco IE 3000 can be deployed in railway, military, Metro Ethernet, and
other applications requiring unique environmental, form factor, or power
inputs in harsh
environments.
Table
2. Features and Benefits of Cisco IE 3000
Series
|
Category |
Feature/Benefit |
|
Designed
for industrial applications |
Extended
temperature, vibration, shock and surge, and noise immunity ratings comply
to specifications for automation, ITS, and substation
environments. |
|
Compact,
PLC-style form factor is ideal for deployment in industrial
environments. |
|
DIN-rail,
wall, and 19 rack mount options allow for deployments in a variety of
control systems. |
|
Variety
of power input options covers a wide range of power requirements for
Industrial Ethernet applications. |
|
Up
to 300 deployment configurations, supporting a range of access port
densities, copper and fiber uplinks, fiber access ports, and power input,
deliver flexibility in deployment. |
|
Support
for SFP modules provides uplink connectivity supporting 100BASE-LX,
100BASE-FX, 1000BASE- SX, 1000BASE-LX, and 1000BASE-ZX
options. |
|
Alarm
relay contacts can be used for an external alert
system. |
|
Ease
of deployment, management, and replacement |
Cisco
Express Setup simplifies initial configuration with a web browser,
eliminating the need for more complex terminal emulation
programs. |
|
Cisco
Smartports templates provide the option to apply a default global or
interface-level macro with a recommended configuration, allowing the user
to easily set up the switch in a configuration optimized for the specific
application. |
|
Smartports
templates for EtherNet/IP provide an optimized setup for these Industrial
Ethernet protocols at the touch of a button. |
|
Swappable
Flash memory is ideal for quick and easy switch replacement. Memory can be
moved from one switch to another, so a switch can be replaced without the
need to reconfigure software features. |
|
The
Cisco IE 3000 can be managed by PROFINET based management tools. The IE
3000 has PROFINET v2 certification, with PROFINET conformance class B
compliance. |
|
Simple
Network Management Protocol (SNMP) (v1/v2/v3) support allows for
management using traditional IT-based management tools, including
CiscoWorks. |
|
Device
Manager allows web-based switch configurations. |
|
DHCP
port-based allocation retains the IP address on a per port basis and
simplifies the end-host replacement in an industrial
setting. |
|
HTTPS
access |
|
Embedded
Event Manager (EEM) provides real-time network event detection and on
board automation |
|
Cisco
Network Assistant (CNA) is a no-charge, Windows-based application that
simplifies the administration of networks of up to 250 users. It supports
the Cisco IE 3000 and a wide range of Cisco Catalyst intelligent
switches. With CNA, users can manage Cisco Catalyst switches and launch
the device managers of Cisco integrated services routers and Cisco
Aironet WLAN access points. Configuration wizards need just a few
user inputs to automatically configure the switch to optimally handle
different types of traffic: control, voice, video, multicast, and
high-priority data. For detailed CNA support information, please go
tohttps://www.cisco.com/en/US/products/ps5931/prod_release_notes_list.html |
|
Cisco
Prime LMS support. For detailed information, please go
tohttps://www.cisco.com/en/US/products/ps11200/products_device_support_tables_list.html |
|
Availability
and scalability |
Virtual
LANs (VLANs) allow for logical segmentation for a network for optimal use
of bandwidth. |
|
802.1q
trunking |
|
QoS
classifies and prioritizes data, guaranteeing determinism for
mission-critical data. |
|
IGMPv3
snooping provides fast client joins and leaves of multicast streams and
limits bandwidth-intensive traffic to only the requestors. An additional
querier allows this operation in a Layer 2 only
environment. |
|
IGMP
filtering provides multicast authentication by filtering out no
subscribers and limits the number of concurrent multicast streams
available per port. |
|
Per-port
broadcast, multicast, and unicast storm control prevents faulty end
stations from degrading overall systems performance. |
|
IEEE
802.1d Spanning Tree Protocol support for redundant backbone connections
and loop-free networks simplifies network configuration and improves fault
tolerance. |
|
EtherChannel
LACP support for quick recovery and bandwidth
utilization |
|
FlexLinks
for fast recovery |
|
Cisco
Hot Standby Router Protocol (HSRP) is supported to create redundant,
failsafe routing topologies. |
|
Resilient
Ethernet Protocol, scalable up to 130 nodes with a very fast convergence,
50ms. |
|
Security |
IEEE
802.1x with VLAN assignment, guest VLAN, and voice VLAN allows dynamic
port-based security, providing user authentication. |
|
Port-based
ACLs for Layer 2 interfaces allow application of security policies on
individual switch ports. |
|
MAC
address filtering prevents the forwarding of any type of packet with a
matching MAC address. |
|
Secure
Shell (SSH) Protocol v2 and SNMPv3 provide network security by encrypting
administrator traffic during Telnet and SNMP sessions. SSHv2 and the
cryptographic version of SNMPv3 require a special cryptographic software
image because of U.S. export restrictions. |
|
TACACS+
and RADIUS authentication enable centralized control of the switch and
restrict unauthorized users from altering the
configuration. |
|
MAC
address notification allows administrators to be notified of users added
to or removed from the network. |
|
Dynamic
Host Configuration Protocol (DHCP) snooping allows administrators to help
ensure consistent mapping of IP to MAC addresses. This can be used to
prevent attacks that attempt to poison the DHCP binding database and to
rate limit the amount of DHCP traffic that enters a switch
port. |
|
DHCP
Interface Tracker (Option 82) augments a host IP address request with the
switch port ID. |
|
Port
security secures the access to an access or 802.1q trunk port based on MAC
address. |
|
After
a specific time frame, the aging feature removes the MAC address from the
switch to allow another device to connect to the same
port. |
|
Trusted
Boundary provides the ability to trust the QoS priority settings if an IP
phone is present and to disable the trust setting if the IP phone is
removed, thereby preventing a malicious user from overriding
prioritization policies in the network. |
|
Up
to 512 ACLs are supported, with two profiles: Security (384 Security ACL
entries and 128 QoS policies) and QoS (128 Security ACL entries and 384
QoS polices). |
|
Cisco
standard and extended IP security router ACLs define security policies on
routed interfaces for control- plane and data-plane
traffic. |
|
Dynamic
ARP Inspection helps ensure user integrity by preventing malicious users
from exploiting the insecure nature of the ARP
protocol. |
|
DHCP
Snooping prevents malicious users from spoofing a DHCP server and sending
out bogus addresses. This feature is used by other primary security
features to prevent a number of other attacks such as ARP
poisoning. |
|
IP
source guard prevents a malicious user from spoofing or taking over
another user's IP address by creating a binding table between client's IP
and MAC address, port, and VLAN. |
|
Support
for private VLANs and SXP (SGT Exchange Protocol) |
|
High-performance
IP routing |
Inter-VLAN
IP routing for full Layer 3 routing between 2 or more
VLANs. |
|
Basic
IP unicast routing protocols (static, Routing Information Protocol Version
1 [RIPv1], RIPv2 and RIPng). |
|
Advanced
IP unicast routing protocols (Open Shortest Path First [OSPF], Interior
Gateway Routing Protocol [IGRP], Enhanced IGRP [EIGRP], Border Gateway
Protocol Version 4 [BGPv4], and Intermediate System-to- Intermediate
System [IS-IS]) are supported for load balancing and constructing scalable
LANs. |
|
Protocol
Independent Multicast (PIM) for IP multicast routing is supported,
including PIM sparse mode (PIM- SM), PIM dense mode (PIM-DM), and PIM
sparse-dense mode. |
|
Cisco
Express Forwarding hardware routing architecture delivers extremely
high-performance IP routing. |
|
IPv6
routing (OSPFv6 and EIGRPv6) support in hardware for maximum
performance. |
|
Policy-based
routing (PBR) allows superior control by facilitating flow redirection
regardless of the routing protocol configured. |
|
HSRP
provides dynamic load balancing and failover for routed links; up to 32
HSRP links supported per unit. |
|
Support
for 1000 multicast groups. |
|
VRF-Lite
virtualization |
Table 3. Cisco IE 3000
Series Switch
Hardware
|
Description |
Specification |
|
Performance |
Wire-speed switching,
16 Gbps switching fabric |
|
Forwarding rate based
on 64-byte packets: 6.5 Mpps |
|
128 MB
DRAM |
|
64 MB Compact Flash
memory |
|
Configurable up to 8000
MAC addresses (Layer 2) |
|
Configurable up to 2000
MAC addresses (Layer 3) |
|
Configurable up to 256
IGMP multicast groups (Layer 2) |
|
Configurable up
to 1000 IGMP groups and multicast routes (Layer 3) |
|
Configurable up to
3,000 unicast routes (Layer 3) |
|
Support jumbo frames up
to 9018 bytes on Gigabit uplink port and mini-jumbo frame (system MTU) up
to 1998 bytes on both 10/100 and 10/100/1000 ports |
|
Connectors and
cabling |
10BASE-T ports: RJ-45
connectors, two-pair Category 3, 4, or 5 unshielded twisted-pair (UTP)
cabling |
|
100BASE-TX ports: RJ-45
connectors, two-pair Category 5 UTP cabling |
|
1000BASE-T ports: RJ-45
connectors, four-pair Category 5 UTP cabling |
|
1000BASE-SX, -LX/LH,
-ZX SFP-based ports: LC fiber connectors (single/multimode
fiber) |
|
100BASE-LX10, -FX: LC
fiber connectors (single/multimode fiber) |
|
Indicators |
Per-port status LED:
Link integrity, disabled, activity, speed, full-duplex
indications |
|
System-status LED:
System, link status, link duplex, link speed,
indications |
|
Dimensions (H x W x
D) |
Cisco IEM-3000-8FM=:
3.5W x 5.8H x 4.4D (89mm W x 147mm H x 112mm D) |
|
Weight |
Cisco IEM-3000-8FM=:
3.2 lb (1.45 kg) |
|
Operating
Environment |
Operating temperature:
-40C to +75C |
|
-40C to +70C (Vented
Enclosure 40 LFM Air Flow) |
|
-40C to +60C (Sealed
Enclosure 0 LFM Air Flow) |
|
-24C to +75C (Fan or
Blower equipped Enclosure 200 LFM Air Flow) |
|
-40C to +85C (IEC
60068-2-2 Environmental Type Testing 16 hours) |
|
Storage temperature:
-40C to +85C |
|
Operating relative
humidity: 10 to 95% (non-condensing) |
|
Operating altitude: Up
to 13,000 ft (3963m) |
|
Storage altitude: Up to
15,000 ft (4573m) |
|
Mean time between
failure (MTBF) |
Cisco IEM-3000-8FM=:
264,689 |
Table 4. Power Specifications for Cisco IE3000 Series Switch
|
Description |
Specification |
|
Maximum power
consumption |
Cisco IEM-3000-8FM=:
10.1W |
Table 5. Compliance Specifications
|
Description |
Specification |
|
Standard safety
certifications |
UL
60950-1 |
|
CSA C22.2 No.
60950-1 |
|
TUV/GS to EN
60950-1 |
|
CB to IEC 60950-1
with all country deviations |
|
NOM |
|
Mechanical
stability |
IEC 60628-2-27
Shock 20g (operational), 30g (nonoperational) |
|
Electromagnetic
Emissions |
FCC Part 15 Class
A |
|
EN
55022 |
|
CISPR
22 |
|
CISPR11 |
|
VCCI Class
A |
|
AS/NZS 3548 Class
A |
|
CNS 13438 Class
A |
|
KN 22 Class
A |
|
Electromagnetic
Immunity |
EN
55024 |
|
AS/NZS CISPR
24 |
|
KN
24 |
|
IEC/EN 61000-4-2
(Electro Static Discharge) |
|
IEC/EN 61000-4-3
(Radiated Immunity) |
|
IEC/EN 61000-4-4
(Fast Transients) |
|
IEC/EN 61000-4-5
(Surge) |
|
IEC/EN 61000-4-6
(Conducted Immunity) |
|
IEC/EN 61000-4-8
(Power Frequency Magnetic Field Immunity) |
|
IEC/EN 61000-4-9
(Pulse Magnetic Field Immunity) |
|
IEC/EN 61000-4-10
(Oscillatory Magnetic Field Immunity) |
|
IEC/EN 61000-4-11
(AC power Voltage Immunity) |
|
IEC/EN 61000-4-16
(Low Frequency Conducted CM Disturbances) |
|
IEC/EN 61000-4-17
(Ripple on DC Input Power) |
|
IEC/EN 61000-4-18
(Damped Oscillatory Wave) |
|
IEC/EN 61000-4-29
(Voltage Dips Immunity, DC power) |
|
IEEE C37.90
(Surge) |
|
IEEE C37.90.1
(Fast Transients) |
|
IEEE C37.90.2
(Radiated Immunity) |
|
IEEE C37.90.3
(Electro Static Discharge) |
|
Industry
specifications |
EN 61131-2
Programmable Controllers (EMC/EMI, environmental,
mechanical) |
|
IEEE 1613 Power
Station and Substation Networking Devices |
|
IEC 61850-3 Power
Station and Substation Communication Networks and
Systems |
|
EN 61326-1
Electrical Equipment for Measurement, Control and Laboratory Use -
EMC |
|
EN 61000-6-1
Immunity for Light Industrial Environments |
|
EN 61000-6-2
Immunity for Industrial Environments |
|
EN 61000-6-4
Emissions for Industrial Environments |
|
TS 61000-6-5 EMC
Immunity for Power Station and Substation |
|
EN 50155 Railway,
Electronic Equipment on Rolling Stock (EMI/EMC, environmental,
mechanical) |
|
EN 50121-3-2
Railway, Electromagnetic Compatibility on Rolling
Stock |
|
EN 50121-4
Railway, Emission and Immunity of Signaling and Telecommunications
Apparatus |
|
EN 60945 Maritime
Navigation and Radio-communication Equipment and
Systems |
|
IEC 60533
Shipboard Electrical and Electronic Installation EMC |
|
Marine Type
Approval (BV, DNV, Korean Register, Lloyd Register) |
|
NEMA TS-2 (EMC,
environmental, mechanical) |
|
ABB Industrial IT
certification |
|
ODVA Industrial
EtherNet/IP support |
|
PROFINETv2
support |
|
Directive
2011/65/EU RoHS |
|
IP20 |
|
Hazardous
locations |
UL/CSA 60079-0,
-15 (Class 1, Div 2 A-D) (requires cabinet enclosure) |
|
EN 60079-0, -15
ATEX Certification (Class 1, Zone 2 A-D) (requires cabinet
enclosure) |
|
IEC 60079-0, -15
(Test report only) (requires cabinet enclosure) |
|
UL
508 |
|
CSA C22.2 No.
142 |
|
Compliance
Marking |
UL/CSA |
|
CE
(Europe) |
|
C-Tick
(Australia/New Zealand) |
|
KCC
(Korea) |
|
ANATEL
(Brazil) |
|
China
RoHS |
|
Operating
Temperature |
-40 C to +70 C
(vented enclosure operating) |
|
-40 C to +60 C
(sealed enclosure operating) |
|
-34 C to +75 C
(fan or blower-equipped enclosure operating) |
|
-40 C to +85 C
(IEC Environmental Type Testing, 16 hours) |
|
Operational
altitude: Up to 13,000 ft |
|
Storage
Temperature |
-40 C to +85 C
(storage temperature) |
|
Storage altitude:
Up to 15,000 ft |
|
Humidity |
Relative
humidity: 5% to 95% non-condensing |
|
Telco |
Common Language
Equipment Identifier (CLEI) code |
|
Warranty |
Five year limited
warranty |
Service and Support
Cisco is committed to minimizing total cost of ownership (TCO). The company
offers a portfolio of technical support services to help ensure that its
products operate efficiently, remain highly available, and benefit from the most
up- to-date system software. The services and support programs described in
Table 6 are available as part of the Cisco Desktop Switching Service and Support
solution and are available directly from Cisco and through resellers.
Table 6. Cisco Services and Support Programs
|
Service and
Support |
Features |
Benefits |
|
Advanced
Services |
|
|
|
Cisco Total
Implementation Solutions (TIS), available direct from
Cisco |
Project
management |
Supplements existing
staff |
|
Cisco Packaged TIS,
available through resellers |
Site survey,
configuration, and deployment |
Helps ensure that
functions meet needs |
|
Cisco SMARTnet and
SMARTnet Onsite support, available direct from Cisco |
Installation, text, and
cutover |
Mitigates
risk |
|
Cisco Packaged SMARTnet
support program, available through resellers |
Training |
Helps enable proactive
or expedited issue resolution |
|
Cisco SMB Support
Assistant |
Major moves, adds, and
changes |
Lowers TCO by taking
advantage of Cisco expertise and knowledge |
|
Design review and
product staging |
Minimizes network
downtime |
|
Access to software
updates 24 hours |
|
|
Web access to technical
repositories |
|
|
Telephone support
through the Cisco Technical Assistance Center (TAC) |
|
|
Advance replacement of
hardware parts |
|
Table 7. Ordering Information for Cisco IE 3000 Series
|
Description |
Specification |
|
IEM-3000-8FM= |
Expansion
Fiber module for Cisco IE-3000-4TC and IE-3000-8TC
switches |
|
8 100 FX
ports |
Networking
