All stock codes associated to this product
IE2000BE=, IE2000-B-E=, 2984431
Cisco IE2000-B-E= Industrial Ethernet 2000
Series Switches
Overview
The CiscoIndustrial Ethernet 2000
(IE 2000) Series is a range of compact, ruggedized access switches that handle
security, voice, and video traffic across industrial networks. They provide
customers in industries such as automotive, oil and gas, mining, transportation,
and energy with highly secure access and industry-leading convergence using
Cisco Resilient Ethernet Protocol (REP).
Product Details
The Cisco IE 2000 Series are designed for low cost,
low ports, and small sizes. They offer:
- Four, eight, or 16 10/100Base-T Ethernet ports
(Small Form-Factor Pluggable [SFP] downlinks on selected models); fixed
configurations with a compact form factor
- Two gigabit combo ports: SFP (100 Mbps and 1
Gbps) or RJ45 uplink
- Dual-input DC power supply, alarm relays, DIN
rail mount
- Industrial Power over Ethernet (PoE) solution
- Conformal coating available
- Swappable SD flash card and mini-USB connector
- Industrial environmental compliance and
certifications
- Industrial partner applications:
Ethernet/IP and PROFINET
Primary Benefits and
Features
- Easy deployment:
Zero-touch discovery using Dynamic Host Control Protocol (DHCP), express
setup, and fast bootup time (60 seconds) to help in migrating to an Ethernet
environment without resistance.
- Security: 802.1x, port
security, and DHCP allow dynamic port-based authentication; Secure Shell
(SSHv2); SNMPv3 provides encrypted administrator traffic during Telnet and
SNMP sessions; TACACS+ and RADIUS authentication facilitate centralized
control and restrict unauthorized users.
- Resiliency: Cisco REP
ring protocol and PROFINET Media Redundancy Protocol (MRP)
- Manageability: Auto
SmartPort, Web Device Manager, Telnet, HTTPS access, SNMP, CNA, and Cisco
Prime Infrastructure.
- Network Address Translation
(NAT): Line-rate, hardware-enabled 1:1 static address translation
designed to enable duplicate IP address usage in the Layer 2 machine node
networks.
- Layer 3 routing: IPv4 and
IPv6.
- Industrial PoE: PoE (IEEE
802.af) and PoE+ (802.3at) supported on selected models.
- Industrial automation
protocols: EtherNet/IP (CIP) and PROFINET MRP (IEC 62439-2) allow
integration with existing management platforms from Rockwell, Siemens, and
others.
Product
Specifications
Switch Performance and Scalability
- Maximum Forwarding Bandwidth 3.8Gbps
- Maximum Switching Bandwidth 7.6Gbps
- Maximum Forwarding rate: 5.66Mpps with
64-byte packets (Line-rate at all packet sizes)
- Egress buffer: 2 MB
- Unicast MAC addresses: 8000
- Internet Group Management Protocol (IGMP)
multicast groups: 255
- Maximum virtual LANs (VLANs): 1005
- IPv4 MAC security ACEs: 384 (default
ternary content-addressable memory [TCAM] template)
- Bidirectional, 128 NAT translation entries
- IPv4 routing: 3500 routes, IPv6 routing:
1750 routes
Detailed Product
Information
Figure 1 shows switch models, and Table 1
shows the Cisco IE 2000 Series configuration information. Table 2 lists the SKUs
for power supplies and license upgrades. Table 3 includes IE 2000 Series product
specifications. Table 4 lists software features. Table 5 includes compliance
specifications. Table 6 outlines management and relevant industry
standards.
Figure 1. Industrial Ethernet 2000
Series
Type of possible Upgrade
Legend:
1: LAN Base to IP Lite Cisco IOS Software
Upgrade
2: Enhanced LAN Base to IP Lite Cisco IOS Software
Upgrade
3: LAN Lite to LAN Base Cisco IOS Software
Upgrade
4: LAN Base to Enhanced LAN Base Cisco IOS Software
Upgrade and License Upgrade
U: Upgradable to L2NAT via Enhanced Lan Base or IP Lite
license
Table 1. Accessories and License Upgrade
PIDs
Product Number |
Description |
L-IE2000-B-E= |
IE2000 LAN Base to Enhanced LAN Base
e-license |
Table 2. Product
Specifications
Description |
Specification |
Hardware |
256 MB DRAM with ECC memory
IEEE 1588v2 FPGA
64
MB on-board flash memory
1GB removable SD flash memory card
(optional)
Mini-USB
connector |
Alarm |
Alarm I/O: Two alarm inputs to detect dry contact
open or close; one alarm output relay |
Power
Consumption |
4-port downlink models: 9.5-15 W
8-port downlink models: 12.5-20 W
16-port downlink models: 21-30 W
4-port PoE/PoE+ models: 21-30 W (16-port base
switch) and 4 PoE/PoE+ power
requirement |
Connectors and
Cabling |
100BASE-FX MMF (2 km), -LX SMF (10 km) -ZX SMF (100
km), BX10 SMF (10 km) SFP and CWDM SFP- based ports: LC fiber
connectors
10/100/1000BASE-T ports: RJ-45 connectors, 4-pair
Category 5 UTP cabling |
Table 3. IE 2000 Series Power
Supplies
Product Number |
Wattage |
Rated Nominal Input Operating
Range |
Supported Input Voltage
Operating Range |
Power Output |
PoE/PoE+ Support |
Use Case
Scenario |
PWR-IE170W-
PC-AC= |
170W |
AC 100-240V/2.3A
50-60Hz
or
DC 125-250V/2.1A |
AC 90-264V
or
DC 106-300V |
54VDC/3.15A |
Yes |
Maximum PoE/PoE+
port support in a AC or high DC environment1 |
PWR-IE170W-
PC-DC= |
170W |
DC 12-54V/23A |
DC 10.8-60V |
54VDC/3.15A |
Yes |
Maximum PoE/PoE+
port support in a DC environment1 |
PWR-IE50W- AC= |
50W |
AC 100-240V/1.25A
50-60Hz
or
DC
125-250V/1.25A |
AC 90-264V
or
DC 106-300V |
24VDC/2.1A |
No |
Provides power to main system,
not used for PoE in an AC or high DC environment |
PWR-IE50W-
AC-IEC= |
50W |
AC 100-240V/1.25A
50-60Hz |
AC 90-264V |
24VDC/2.1A |
No |
Provides power to main system,
not used for PoE in DC environment |
PWR-IE65W-
PC-AC= |
65W |
AC100-240V/1.4A50-60Hz
or
DC
125-250V/1.0A |
AC90-264V
or
DC
106-300V |
54VDC/1.2A |
Yes |
Supportsupto4portsPoE
or2ports
PoE+whenusedinPoEpowerinput in
anACor
highDCenvironment |
PWR-IE65W-
PC-DC= |
65W |
DC 24-48VDC/4.5A |
DC 18-60V |
54VDC/1.2A |
Yes |
Supportsupto4portsPoE
or2ports
PoE+whenusedinPoEpowerinput in
aDCenvironment |
The 170W (both AC and DC) power supplies have enough
power for the base unit and the PoE. Connect one power output from the 170W PSU
to the main power input of the IE2000, and the other power output of the 170W
PSU to the PoE power input of the IE2000.
Table 4. Cisco IE 2000 Software
Features
LAN Lite License |
Baseline
Features |
Layer 2
Switching |
IEEE 802.1, 802.3, 802.3at,
802.3af standard (see Table 6), VTPv2, NTP, UDLD, CDP, LLDP, Unicast MAC
filter, Resilient Ethernet Protocol (REP), Media Redundancy Protocol (MRP)
Ring (IEC 62439-2) |
Security |
SCP, SSH, SNMPv3, TACACS+,
RADIUS Server/Client, MAC Address Notification, BPDU Guard, SPAN
session |
Multicast |
IGMPv1, v2, v3 Snooping, IGMP
filtering, IGMP Querier |
Management |
Fast Boot, Express Setup, Web
Device Manager, CNA, Cisco Prime, LMS, MIB, SmartPort, SNMP,
syslog |
Industrial
Ethernet |
EtherNet/IP, Profinet v2
|
LAN Base License |
Additional
Features |
Layer 2
Switching |
VTPv3, EtherChannel, Voice
VLAN, Flexlink |
Security |
IPv4 Port-Security, DHCP
Snooping, Dynamic ARP Inspection, IP Source Guard, 802.1x, Guest VLAN. MAC
Authentication Bypass, 802.1x Multi-Domain Authentication, Storm Control,
Trust Boundary, Access-List (ACL), IPv6 MLD snooping |
Quality of
Service |
IPv4 Ingress Policing,
Rate-Limit, Egress Queuing/Shaping, AutoQoS |
Management |
Port-Based DHCP, Storm Control
- Unicast, Multicast, Broadcast, SPAN Sessions, RSPAN, DHCP Server,
Customized TCAM/SDM Size Configuration, Embedded Event Manager
(EEM) |
Industrial
Ethernet |
IEEE 1588
PTPv2 |
IPv4 Routing |
IPv4 static
routing |
IPv6 Routing |
IPv6 host support, HTTP over
IPv6, SNMP over IPv6 |
Enhanced LAN
Base |
Additional
Features |
Industrial
Management |
Layer 2 switching with 1:1
static Network Address Translation (NAT) |
IP Lite License |
Additional
Features |
IPv4 Routing |
RIP, OSPF, EIGRP, VRF Lite,
PIM for L3 multicast routing including sparse (SM) and dense (DM)
mode. |
IPv6 Routing |
IPv6 Static routing,
OSPFv3 |
Security |
FIPS 140-2 |
Embedded Event
Manager |
EEM feature enabled with IP
Lite License |
Table 5. Compliance
Specifications
Description |
Specification |
Safety
Certifications |
UL/CSA 60950-1
EN
60950-1
CB
to IEC 60950-1 (with country deviations)
NOM to NOM-019-SCF1 (through partners and
distributors)
CE
Marking |
Hazard Location |
ANSI/ISA 12.12.01 (Class1, Div2 A-D)*
EN 60079-0, -15 ATEX Certificate (Class 1, Zone2 A-D)*
*Cabinet enclosure
required |
EMC Emissions and Immunity
Compliance |
FCC 47 CFR Part 15 Class A
EN
55022A Class A
VCCI Class A
RoHS compliance
AS/NZS CISPR 22 Class A, AS/NZS CISPR
24
CISPR11 Class A, CISPR22 Class A
ICES 003 Class A
KCC -Korea
CE
Marking
C-Tick (Australia)
Russia certification
Brazil certification
IEC/EN/EN61000-4-2 (Electro Static Discharge), 15kV
air/8kV contact
IEC/EN 61000-4-3 (Radiated Immunity, 10 and 20
V/m)
IEC/EN 61000-4-4 (Fast Transients - 4kV power line,
4kV data line)
IEC/EN 61000-4-5 (Surge 2 kV/1 kV)
IEC/EN 61000-4-6 (Conducted Immunity, 10
V/emf)
IEC/EN 61000-4-8 (Power Frequency Magnetic Field
Immunity)
IEC/EN 61000-4-9 (Pulse Magnetic Field
Immunity)
IEC/EN 61000-4-10 (Oscillatory Magnetic Field
Immunity)
IEC/EN 61000-4-11 (AC power Voltage
Immunity)
IEC/EN 61000-4-29 (Voltage Dips
Immunity)
IEC/EN 61000-6-1 (Immunity for Light Industrial
Environments)
IEC/EN 61000-6-2 (Immunity for Industrial
Environments)
IEC/EN 61000-6-4 Class A
EN
61326 |
Shock and
Vibration |
IEC 60068-2-27 (Operational Shock: 30G 11ms, half
sine)
IEC 60068-2-27 (Non-Operational Shock 55-70G,
trapezoidal)
IEC 60068-2-6, IEC 60068-2-64, EN 61373
(Operational Vibration)
IEC 60068-2-6, IEC 60068-2-64, EN 61373
(Non-operational Vibration) |
Industry
Standards |
UL508
CSA C22.2 No. 142
EN
61131-2 (EMC/EMI, environmental, mechanical)
Protective coating (specific models
only)
Marine DnV
Substation KEMA (IEEE 1613, IEC
61850-3)
Railway EN 50155 (EMI/EMC, environmental,
mechanical)
EN50121-3-2
EN50121-4
NEMA TS-2 (EMC, environmental,
mechanical)
ABB Industrial IT certification
IP30
ODVA Industrial Ethernet/IP support
PROFINETv2.3
support |
Corrosive
Testing |
ISO-12944-6
IEC-60068-2-60 |
Humidity |
IEC 60068-2-52 (salt fog mist, test Kb) marine
environments
IEC 60068 -2-3
IEC 60068-2-30
Relative humidity: 5% to 95%
non-condensing |
Operating
Temperature |
-40C to +70C (vented enclosure - 40 LFM Air
Flow)
-40C to +60C (sealed enclosure 0 LFM Air
Flow)
-34C to +75C (fan or blower-equipped enclosure 200
LFM Air Flow)
-40C to +85C (IEC 60068-2-2 Environmental Type
Testing 16 hours)
Operational altitude: Up to 15,000
ft |
Storage
Temperature |
-40 C to +85 C (storage temperature)
IEC 60068-2-14
Storage altitude: Up to 15,000
ft |
Mean Time Between Failure
(MTBF) |
Mean time between failure: 374,052 hours (42.7
years) |
Warranty |
Five-year limited warranty on all IE-2000 HW PIDs
and all IE Power Supplies defined in table 4 above. See link below for
details on warranty |
Table 6. Cisco Services and Support
Programs
Advanced
Services |
Cisco Total Implementation Solutions (TIS),
available directly from Cisco
Cisco Packaged TIS, available through
resellers
Cisco SMARTnetand SMARTnet Onsite support, available directly
from Cisco
Cisco Packaged SMARTnet support program, available
through resellers
Cisco SMB Support
Assistant |
Project management
Site survey, configuration, and
deployment
Installation, text, and cutover
Training
Major moves, adds, and changes
Design review and product staging
24-hour access to software updates
Web access to technical repositories
Telephone support through the Cisco Technical
Assistance Center (TAC)
Advance replacement of hardware
parts |
Supplements existing staff
Helps ensure that functions meet needs
Mitigates risk
Helps enable proactive or expedited issue
resolution
Lowers TCO by taking advantage of Cisco expertise
and knowledge
Reduces network
downtime |