All stock codes associated to this product
IE2000LB=, IE2000-L-B=, 2984432
Cisco IE2000-L-B= Industrial Ethernet 2000 Series
Switches
Overview
The CiscoIndustrial Ethernet 2000 (IE 2000) Series is a range
of compact, ruggedized access switches that handle security, voice, and video
traffic across industrial networks. They provide customers in industries such as
automotive, oil and gas, mining, transportation, and energy with highly secure
access and industry-leading convergence using Cisco Resilient Ethernet Protocol
(REP).
Details
The Cisco IE 2000 Series are designed for low cost, low ports, and
small sizes. They offer:
- Four, eight, or 16 10/100Base-T Ethernet ports (Small Form-Factor
Pluggable [SFP] downlinks on selected models); fixed configurations with a
compact form factor
- Two gigabit combo ports: SFP (100 Mbps and 1 Gbps) or RJ45
uplink
- Dual-input DC power supply, alarm relays, DIN rail mount
- Industrial Power over Ethernet (PoE) solution
- Conformal coating available
- Swappable SD flash card and mini-USB connector
- Industrial environmental compliance and certifications
- Industrial partner applications: Ethernet/IP and
PROFINET
Primary Benefits and Features
- Easy deployment: Zero-touch discovery using Dynamic
Host Control Protocol (DHCP), express setup, and fast bootup time (60 seconds)
to help in migrating to an Ethernet environment without resistance.
- Security: 802.1x, port security, and DHCP allow
dynamic port-based authentication; Secure Shell (SSHv2); SNMPv3 provides
encrypted administrator traffic during Telnet and SNMP sessions; TACACS+ and
RADIUS authentication facilitate centralized control and restrict unauthorized
users.
- Resiliency: Cisco REP ring protocol and PROFINET–
Media Redundancy Protocol (MRP)
- Manageability: Auto SmartPort, Web Device Manager,
Telnet, HTTPS access, SNMP, CNA, and Cisco Prime Infrastructure.
- Network Address Translation (NAT): Line-rate,
hardware-enabled 1:1 static address translation designed to enable duplicate
IP address usage in the Layer 2 machine node networks.
- Layer 3 routing: IPv4 and IPv6.
- Industrial PoE: PoE (IEEE 802.af) and PoE+
(802.3at) supported on selected models.
- Industrial automation protocols: EtherNet/IP (CIP)
and PROFINET MRP (IEC 62439-2) allow integration with existing management
platforms from Rockwell, Siemens, and others.
Detailed Product Information
Figure 1 shows switch models, and Table 1 shows the Cisco IE 2000
Series configuration information. Table 2 lists the SKUs for power supplies and
license upgrades. Table 3 includes IE 2000 Series product specifications. Table
4 lists software features. Table 5 includes compliance specifications. Table 6
outlines management and relevant industry standards.
Figure 1. Industrial Ethernet 2000 Series
Table 1. Accessories and License Upgrade
PIDs
|
Product
Number |
Description |
|
L-IE2000-L-B= |
IE2000 LAN Lite to LAN
Base e-license |
Table 2. Product
Specifications
|
Description |
Specification |
|
Hardware |
256 MB DRAM with ECC
memory |
|
IEEE 1588v2
FPGA |
|
64 MB on-board flash
memory |
|
1GB removable SD flash
memory card (optional) |
|
Mini-USB
connector |
|
Alarm |
Alarm I/O: Two alarm
inputs to detect dry contact open or close; one alarm output
relay |
|
Power
Consumption |
4-port downlink models:
9.5-15 W |
|
8-port downlink models:
12.5-20 W |
|
16-port downlink
models: 21-30 W |
|
4-port PoE/PoE+ models:
21-30 W (16-port base switch) and 4 PoE/PoE+ power
requirement |
|
Connectors and
Cabling |
100BASE-FX MMF (2 km),
-LX SMF (10 km) -ZX SMF (100 km), BX10 SMF (10 km) SFP and CWDM SFP- based
ports: LC fiber connectors |
|
10/100/1000BASE-T
ports: RJ-45 connectors, 4-pair Category 5 UTP
cabling |
|
Dimensions |
IE-2000 6 ports (copper
downlinks) chassis: 5.1H x 2.95W x 4.51D in (130mm H x 74.9mm W x 115mm
D) |
|
(H x W x
D) |
IE-2000 6 ports (SFP
downlinks) chassis: 5.1H x 3.15W x 4.51D in (130mm H x 80mm W x 115mm
D) |
|
Including DIN
Rail |
IE-2000 10 ports short
chassis: 5.1"H x 3.6"W x 4.51"D (130mm H x 91.4mm W x 115mm
D) |
|
IE-2000 10 ports long
chassis: 5.1"H x 3.6"W x 5.26"D (130mm H x 91.4mm W x 134mm
D) |
|
IE-2000 18-20 ports
chassis: 5.1"H x 5.0"W x 5.26"D (130mm H x 127mm W x 134mm
D) |
|
PWR-IE50W-AC=: 5.8"H x
2.0"W x 4.4"D (147mm H x 51 mm W x 112mm D) |
|
PWR-65W-PC-AC=: 5.9 "H
x 2.6"W x 4.6"D (150mm H x 66mm W x 117mm D) |
|
PWR-65W-PC-DC=: 5.9 "H
x 2.6"W x 4.6"D (150mm H x 66mm W x 117mm D) |
|
PWR-IE170W-PC-AC=: 5.93
x 3.72 x 5.60 in. (150.6 x 94.5 x 142.2mm) |
|
PWR-IE170W-PC-DC=: 5.93
x 4.47 x 5.75 in. (150.6 x 113.5 x 145.8mm) |
|
Weight |
IE-2000 6 ports
chassis: 2.45 lbs (1.11 kg) |
|
IE-2000 6 ports (SFP):
2.69 lbs (1.22 kg) |
|
IE-2000 10 ports short
chassis: 2.75 lbs (1.25 kg) |
|
IE-2000 10 ports long
chassis: 3.45 lbs (1.56 kg) |
|
IE-2000 18-20 ports
chassis: 4.35 lbs (1.97 kg) |
|
PWR-IE50W-AC=: 1.4 lb
(0.65 kg) |
|
PWR-IE50W-AC-IEC=: 1.4
lb (0.65 kg) |
|
PWR-IE65W-PC-DC=: 2.6
(1.18 Kg) |
|
PWR-IE65W-PC-AC=: 2.7
(1.24 Kg) |
|
PWR-IE170W-PC-AC=: 3.88
pounds (1.76 kg) |
|
PWR-IE170W-PC-DC=: 3.7
pounds (1.67 kg) |
Table 3. Cisco IE 2000 Software
Features
|
LAN Lite
License |
Baseline
Features |
|
Layer 2
Switching |
IEEE 802.1, 802.3,
802.3at, 802.3af standard (see Table 6), VTPv2, NTP, UDLD, CDP, LLDP,
Unicast MAC filter, Resilient Ethernet Protocol (REP), Media Redundancy
Protocol (MRP) Ring (IEC 62439-2) |
|
Security |
SCP, SSH, SNMPv3,
TACACS+, RADIUS Server/Client, MAC Address Notification, BPDU Guard, SPAN
session |
|
Multicast |
IGMPv1, v2, v3
Snooping, IGMP filtering, IGMP Querier |
|
Management |
Fast Boot, Express
Setup, Web Device Manager, CNA, Cisco Prime, LMS, MIB, SmartPort, SNMP,
syslog |
|
Industrial
Ethernet |
EtherNet/IP, Profinet
v2 |
|
|
|
|
LAN Base
License |
Additional
Features |
|
Layer 2
Switching |
VTPv3, EtherChannel,
Voice VLAN, Flexlink |
|
Security |
IPv4 Port-Security,
DHCP Snooping, Dynamic ARP Inspection, IP Source Guard, 802.1x, Guest
VLAN. MAC Authentication Bypass, 802.1x Multi-Domain Authentication, Storm
Control, Trust Boundary, Access-List (ACL), IPv6 MLD
snooping |
|
Quality of
Service |
IPv4 Ingress Policing,
Rate-Limit, Egress Queuing/Shaping, AutoQoS |
|
Management |
Port-Based DHCP, Storm
Control - Unicast, Multicast, Broadcast, SPAN Sessions, RSPAN, DHCP
Server, Customized TCAM/SDM Size Configuration, Embedded Event Manager
(EEM) |
|
Industrial
Ethernet |
IEEE 1588
PTPv2 |
|
IPv4
Routing |
IPv4 static
routing |
|
IPv6
Routing |
IPv6 host support, HTTP
over IPv6, SNMP over IPv6 |
|
|
|
|
Enhanced LAN
Base |
Additional
Features |
|
Industrial
Management |
Layer 2 switching with
1:1 static Network Address Translation (NAT) |
|
|
|
|
IP Lite
License |
Additional
Features |
|
IPv4
Routing |
RIP, OSPF, EIGRP, VRF
Lite, PIM for L3 multicast routing including sparse (SM) and dense (DM)
mode. |
|
IPv6
Routing |
IPv6 Static routing,
OSPFv3 |
|
Security |
FIPS
140-2 |
|
Embedded Event
Manager |
EEM feature enabled
with IP Lite License |
Table 4. Compliance Specifications
|
Description |
Specification |
|
Safety
Certifications |
UL/CSA
60950-1 |
|
EN
60950-1 |
|
CB to IEC 60950-1 (with
country deviations) |
|
NOM to NOM-019-SCF1
(through partners and distributors) |
|
CE
Marking |
|
Hazard
Location |
ANSI/ISA 12.12.01
(Class1, Div2 A-D)* |
|
EN 60079-0, -15 ATEX
Certificate (Class 1, Zone2 A-D)* |
|
* Cabinet
enclosure required |
|
EMC Emissions and
Immunity Compliance |
FCC 47 CFR Part 15
Class A |
|
EN 55022A Class
A |
|
VCCI Class
A |
|
RoHS
compliance |
|
AS/NZS CISPR 22 Class
A, AS/NZS CISPR 24 |
|
CISPR11 Class A,
CISPR22 Class A |
|
ICES 003 Class
A |
|
KCC
-Korea |
|
CE
Marking |
|
C-Tick
(Australia) |
|
Russia
certification |
|
Brazil
certification |
|
IEC/EN/EN61000-4-2
(Electro Static Discharge), 15kV air/8kV contact |
|
IEC/EN 61000-4-3
(Radiated Immunity, 10 and 20 V/m) |
|
IEC/EN 61000-4-4 (Fast
Transients - 4kV power line, 4kV data line) |
|
IEC/EN 61000-4-5 (Surge
2 kV/1 kV) |
|
IEC/EN 61000-4-6
(Conducted Immunity, 10 V/emf) |
|
IEC/EN 61000-4-8 (Power
Frequency Magnetic Field Immunity) |
|
IEC/EN 61000-4-9 (Pulse
Magnetic Field Immunity) |
|
IEC/EN 61000-4-10
(Oscillatory Magnetic Field Immunity) |
|
IEC/EN 61000-4-11 (AC
power Voltage Immunity) |
|
IEC/EN 61000-4-29
(Voltage Dips Immunity) |
|
IEC/EN 61000-6-1
(Immunity for Light Industrial Environments) |
|
IEC/EN 61000-6-2
(Immunity for Industrial Environments) |
|
IEC/EN 61000-6-4 Class
A |
|
EN
61326 |
|
Shock and
Vibration |
IEC 60068-2-27
(Operational Shock: 30G 11ms, half sine) |
|
IEC 60068-2-27
(Non-Operational Shock 55-70G, trapezoidal) |
|
IEC 60068-2-6, IEC
60068-2-64, EN 61373 (Operational Vibration) |
|
IEC 60068-2-6, IEC
60068-2-64, EN 61373 (Non-operational Vibration) |
|
Industry
Standards |
UL508 |
|
CSA C22.2 No.
142 |
|
EN 61131-2 (EMC/EMI,
environmental, mechanical) |
|
Protective coating
(specific models only) |
|
Marine
DnV |
|
Substation KEMA (IEEE
1613, IEC 61850-3) |
|
Railway EN 50155
(EMI/EMC, environmental, mechanical) |
|
EN50121-3-2 |
|
EN50121-4 |
|
NEMA TS-2 (EMC,
environmental, mechanical) |
|
ABB Industrial IT
certification |
|
IP30 |
|
ODVA Industrial
Ethernet/IP support |
|
PROFINETv2.3
support |
|
Corrosive
Testing |
ISO-12944-6 |
|
IEC-60068-2-60 |
|
Humidity |
IEC 60068-2-52 (salt
fog mist, test Kb) marine environments |
|
IEC 60068
-2-3 |
|
IEC
60068-2-30 |
|
Relative humidity: 5%
to 95% non-condensing |
|
Operating
Temperature |
-40C to +70C (vented
enclosure - 40 LFM Air Flow) |
|
-40C to +60C (sealed
enclosure 0 LFM Air Flow) |
|
-34C to +75C (fan or
blower-equipped enclosure 200 LFM Air Flow) |
|
-40C to +85C (IEC
60068-2-2 Environmental Type Testing 16 hours) |
|
Operational altitude:
Up to 15,000 ft |
|
Storage
Temperature |
-40 C to +85 C (storage
temperature) |
|
IEC
60068-2-14 |
|
Storage altitude: Up to
15,000 ft |
|
Mean Time Between
Failure (MTBF) |
Mean time between
failure: 374,052 hours (42.7 years) |
|
Warranty |
Five-year limited
warranty on all IE-2000 HW PIDs and all IE Power Supplies defined in table
4 above. See link below for details on
warranty |
Table 5. Cisco Services and Support
Programs
|
Advanced
Services |
|
Cisco Total
Implementation Solutions (TIS), available directly from
Cisco |
Project
management |
Supplements existing
staff |
|
Cisco Packaged TIS,
available through resellers |
Site survey,
configuration, and deployment |
Helps ensure that
functions meet needs |
|
Cisco
SMARTnet and SMARTnet Onsite support, available directly
from Cisco |
Installation, text, and
cutover |
Mitigates
risk |
|
Cisco Packaged SMARTnet
support program, available through resellers |
Training |
Helps enable proactive
or expedited issue resolution |
|
Cisco SMB Support
Assistant |
Major moves, adds, and
changes |
Lowers TCO by taking
advantage of Cisco expertise and knowledge |
|
Design review and
product staging |
Reduces network
downtime |
|
24-hour access to
software updates |
|
Web access to technical
repositories |
|
Telephone support
through the Cisco Technical Assistance Center (TAC) |
|
Advance replacement of
hardware parts |
Networking
