|
Physical
Stats |
|
|
Form
Factor |
ATX |
|
Dimensions |
12" x 10" (30.48cm x
25.4cm) |
|
|
|
Processor/Cache |
|
|
CPU |
Intel Xeon processor
E5-2600 v4/ v3 family (up to 145W
TDP**) |
|
Dual Socket R3 (LGA
2011) |
|
Cores /
Cache |
Up to 22
Cores / Up
to 55MB Cache |
|
System
Bus |
QPI up to 9.6
GT/s |
|
Note |
BIOS
version 2.0 or above is required |
|
Note |
** Motherboard supports
this maximum TDP. Please verify your system can thermally
support. |
|
|
|
System
Memory |
|
|
Memory
Capacity |
8x 288-pin DDR4 DIMM
slots |
|
Up to
1TB ECC 3DS LRDIMM, 512GB ECC RDIMM |
|
Memory
Type |
2400/2133/1866/1600MHz
ECC DDR4 SDRAM 72-bit |
|
DIMM
Sizes |
RDIMM: 64GB, 32GB,
16GB, 8GB, 4GB |
|
LRDIMM: 64GB,
32GB |
|
3DS LRDIMM:
128GB |
|
Memory
Voltage |
1.2
V |
|
Error
Detection |
Corrects single-bit
errors |
|
|
|
On-Board
Devices |
|
|
Chipset |
Intel C612
chipset |
|
AHCI
SATA |
SATA3 (6Gbps); RAID 0,
1, 5, 10 |
|
SCU
SATA |
SATA3 (6Gbps); RAID 0,
1, 5, 10 |
|
IPMI |
Support for Intelligent
Platform Management Interface v.2.0 |
|
IPMI 2.0 with virtual
media over LAN and KVM-over-LAN support |
|
ASPEED AST2400
BMC |
|
Network
Controllers |
Intel i210 Gigabit
Ethernet controller |
|
Supports 10BASE-T,
100BASE-TX, and 1000BASE-T, RJ45 output |
|
1x Realtek RTL8211E PHY
(dedicated IPMI) |
|
Video |
ASPEED AST2400
BMC |
|
|
|
Input /
Output |
|
|
SATA |
10x SATA3 (6Gbps)
ports |
|
LAN |
2x RJ45 Gigabit
Ethernet LAN ports |
|
1x RJ45 Dedicated IPMI
LAN port |
|
USB |
4x USB 3.0 ports (2
rear + 2 via header) |
|
5x USB 2.0 ports (2
rear + 2 via header + 1 Type A) |
|
Video |
1x VGA
port |
|
Serial Port /
Header |
2x Fast UART 16550 port
/ 1 Header |
|
DOM |
DOM (Disk
on Module) power connector |
|
TPM |
1x TPM
Header |
|
|
|
Chassis (Optimized
for X10DRL-i ) |
|
|
1U
Chassis: |
SC813MFTQ-R400CB |
|
SC813MFTQ-R606CB |
|
SC813MFTQ-441CB |
|
SC514-505 |
|
SC514-R400C |
|
2U
Chassis: |
SC823TQ-653LPB |
|
SC826TQ-R500LPB |
|
SC213LT-600LPB |
|
SC825TQ-563LPB |
|
SC825TQ-R740LPB |
|
3U
Chassis: |
SC836TQ-R500B |
|
SC833T-653B |
|
Mid/Mini Tower
Chassis: |
SC732D4F-903B |
|
SC732i-500B |
|
4U / Tower
Chassis: |
SC842TQ-665B |
|
SC842TQ-865B |
|
Important Chassis
Notes |
To support the new
generation IntelXeon processor-based
motherboards, Revision M chassis is recommended.
Please talk to your sales representative for details. |
|
|
|
|
|
|
SuperServer(s) with
X10DRL-i |
|
|
Model(s) |
SYS-6018R-MT |
|
SYS-6018R-MTR |
|
|
|
Expansion
Slots |
|
|
PCI-Express |
3 PCI-E 3.0
x8 |
|
1 PCI-E 3.0
x16 |
|
1 PCI-E 3.0 x4 (in
x8) |
|
1 PCI-E 2.0 x4 (in
x8) |
|
|
|
System
BIOS |
|
|
BIOS
Type |
128Mb SPI Flash EEPROM
with AMI BIOS |
|
BIOS
Features |
Plug and Play
(PnP) |
|
PCI
2.3 |
|
ACPI 3.0 /
4.0 |
|
USB Keyboard
support |
|
SMBIOS
2.7.1 |
|
UEFI
2.3.1 |
|
|
|
Management |
|
|
Software |
SuperDoctor
5 |
|
Intel Node Manager
3.0 |
|
Watch
Dog |
|
IPMI
2.0 |
|
Power
Configurations |
ACPI Power
Management |
|
Power-on mode for AC
power recovery |
|
|
|
PC Health
Monitoring |
|
|
Voltage |
Monitors for CPU Cores,
+3.3V, +5V, +12V, +5V Standby, VBAT, Memory Voltages. |
|
5 Phase-switching
voltage regulator |
|
FAN |
8x 4-pin fan headers
(up to 8 fans) |
|
8x fans with tachometer
monitoring |
|
Status monitor for
speed control |
|
Pulse Width Modulated
(PWM) fan connectors |
|
Temperature |
Monitoring for CPU and
chassis environment |
|
CPU thermal trip
support |
|
Thermal Control for 8x
Fan Connectors |
|
Thermal Monitor 2 (TM2)
support |
|
PECI |
|
LED |
CPU / System Overheat
LED |
|
Suspend static
indicator LED |
|
UID/Remote
UID |
|
Other
Features |
Chassis intrusion
detection |
|
Chassis intrusion
header |
|
RoHS |
|
Dual Cooling
Zones |
|
|
|
Operating
Environment |
|
|
Operating Temperature
Range |
10C - 35C (50F -
95F) |
|
Non-Operating
Temperature Range |
-40C - 70C (-40F -
158F) |
|
Operating Relative
Humidity Range |
8% - 90%
(non-condensing) |
|
Non-Operating Relative
Humidity Range |
5% - 95%
(non-condensing) |
