All stock codes associated to this product
ES1008PV2, ES-1008P V2, NWEES1008PV2, NWE-ES-1008P-V2, 4717964701558
Edimax ES-1008P V2 Long Range 8-Port Fast Ethernet PoE+
Switch With DIP Switch
Overview
The Edimax ES-1008P V2 is an Eight PoE+ Port Fast Ethernet switch designed
for use in home, small or medium sized network environments. With eight DIP
switches, PoE ports can be manually set with on/off control, extending PoE
delivery distance up to 200 meters and port-based on/off control for VLAN and
QoS is also supported. The switch easily connects and supplies power to
PoE-enabled devices such as wireless access points, network cameras and IP
phones as well as other Ethernet-enabled devices such as computers, printers or
network attached storage (NAS). The compact size and fan-less design make the
switch an ideal solution for expanding home and small business networks.
Power over Ethernet (PoE+) Auto Detection
Features eight IEEE 802.3at Power over Ethernet (PoE+) ports which supply up
to 30 watts of electricity per port. It can convert standard 100-240V AC power
into low-voltage 50 - 57V DC electricity to power IEEE 802.3at compliant network
accessories via existing LAN cables. With PoE detection capability, the ES-1008P
V2 is able to verify whether the connected device is IEEE 802.3at compliant. In
the event that a PoE device is not detected, only network data will be
transmitted through the LAN cable – meaning easy setup and management of network
devices such as access points and network cameras.
CCTV Mode
The unique CCTV-mode DIP switch function is ideal for surveillance networking
environment. Switching all DIP switches to on enables CCTV mode which gives
multi-function PoE + data extension, Port Isolation and QoS on the ES-1008P V2.
When using video surveillance systems for homes, business or institutions, the
CCTV mode provides better speeds for multicast viewing and easier installation.
Setting all DIP switches back to off quickly changes the ES-1008P V2 back to
normal for general-use data transmission.
Power and Data Distance Extension
The built-in DIP switch provides extended operation modes on switch 1, 2, 5,
6 & 7. The ES-1008P V2 operates as a standard IEEE 802.at/af PoE Switch when
DIP switches are off. With switches on, the ES-1008P V2 operates on a per-port
basis at 10Mbps duplex operation but can support 30-watt PoE power output over a
distance of up to 200 meters, overcoming the 100m limit on Ethernet UTP cables.
With this brand-new feature, the ES-1008P V2 provides an additional solution for
802.3at/af PoE distance extension and saves costs of Ethernet cable
installation.
Innovative Port-based VLAN Features
The ES-1008P V2 features port-based VLAN where ports can be isolated from
each other via DIP switch port 3 & 8. This can help to prevent IP camera’s
multicast or broadcast storms from affecting each other.
Hardware QoS for Video & Voice Traffic Priority
Supports 802.1p QoS via DIP switch port 4. This ensures first priority for
video and voice traffic.
Plug & Play, No Installation Required
Just plug Ethernet or PoE enabled devices into the switch. Data and power can
be transmitted through existing standard Cat-5e Ethernet cables with no
additional cables or configuration required. The ES-1008P V2 reduces the
difficulty, time and cost of network setup.
Flexible Network Deployment & Energy Efficient
A fast and effective solution when power outlets are unavailable for your
network devices. The switch additionally supports IEEE 802.3az Energy Efficient
Ethernet which allows for less power consumption and reduced costs during
periods of low data activity.
Fan-Less Quiet & Compact Design
A fan-less design ensures quiet operation and enables an even more compact
design, keeping valuable desk space free in home or small office environments.
Application Diagram
Specifications
|
Hardware |
|
Ports |
8
RJ-45 10/100Base-T PoE+ ports |
|
Transmission
Method |
Store
and forward |
|
LED
Indicators |
Power:
Green LED |
|
LNK/ACT:
Green LED (Port 1 – Port 8) |
|
PoE:
Green LED (Port 1 – Port 8) |
|
PoE
Alert: Green LED (PoE overload alarm) |
|
Fan |
Fanless |
|
DIP
Switch |
PoE
Extend, VLAN, QoS |
|
Power
Requirements |
Input:
100-240V AC |
|
Power
Supply: 160W |
|
Power
Consumption |
5W
|
|
Dimensions
(L x W x H) |
265.1mm
x183.7mm x 44mm |
|
Weight |
1605g |
|
Performance |
|
Switching
Capacity |
1.6G
|
|
MAC
Address |
1K
|
|
Buffer
Memory |
56Kb
|
|
Filtering
/ Forwarding Rates |
100Mbps
port - 148,800pps |
|
10Mbps
port - 14,880pps |
|
Power
over Ethernet |
|
Standard |
IEEE
802.3af |
|
IEEE
802.3at |
|
Power
Output |
Up
to 30W per port |
|
Pin
Assignment |
1/2(+),
3/6(-) |
|
PoE
Power Budget |
130W
|
|
Environment |
|
Temperature |
Operating:
0 ~ 40 °C |
|
Storage:
-40 ~ 70 °C |
|
Humidity
(Non-condensing) |
Operating:
10 ~ 90% |
|
Storage:
5 ~ 90% |
|
Standards
Compliance |
|
Standards |
IEEE
802.3 10BaseT Ethernet |
|
IEEE
802.3u 100BaseTX Fast Ethernet |
|
IEEE
802.3af Power over Ethernet (PoE) |
|
IEEE
802.3at Power over Ethernet Plus (PoE+) |
|
IEEE
802.3x Full-duplex and flow control |
|
IEEE
802.3az Energy efficient Ethernet |
|
Certifications |
FCC,
CE, LVD |
Networking
