All stock codes associated to this product
GS1008PHEV2, GS-1008PHE V2, ED20081
Edimax GS-1008PHE V2 Long Range 8-Port Gigabit Switch
with 4 PoE+ Ports & DIP Switch
Features
- Eight 10/100/1000Mbps Gigabit ports and four PoE+ ports.
- IEEE 802.3af/at PoE compliant (ports 1 - 4) for simplified deployment and
installation.
- Up to 30W per PoE port (total power budget: 60W) for powering PoE-enabled
devices.
- Auto-detection of powered devices (PD) and power consumption levels.
- Hardware DIP switch for “Standard” and “Extend” mode selection; the
“Extend” mode features 30-watt PoE transmit distance of 200m at speed of
10Mbps.
- Port-based VLAN and Loop Protection features.
- Supports 802.1p Quality of Service (QoS)
Overview
The Edimax GS-1008PHE V2is an eight port Fast Ethernet switch with four PoE+
Ports designed for use in home, small or medium sized network environments.With
four DIP switches, PoE ports can be manually set with on/off control, extending
PoE delivery distance up to 200 meters and port-based on/off control for VLAN
and QoS is also supported. The switch easily connects and supplies power to
PoE-enabled devices such as wireless access points, network cameras and IP
phones as well as other Ethernet-enabled devices such as computers, printers or
network attached storage (NAS). The compact size and fan-less design make the
switch an ideal solution for expanding home and small business networks.
Power over Ethernet (PoE+) Auto Detection
Features four IEEE 802.3at Power over Ethernet (PoE+) ports which supply up
to 30 watts of electricity per port. It can convert standard 100-240V AC power
into low-voltage 50 - 57V DC electricity to power IEEE 802.3at compliant network
accessories via existing LAN cables. With PoE detection capability, the
GS-1008PHE V2 is able to verify whether the connected device is IEEE 802.3at
compliant. In the event that a PoE device is not detected, only network data
will be transmitted through the LAN cable – meaning easy setup and management of
network devices such as access points and network cameras.
CCTV Mode
The unique CCTV-mode DIP switch function is ideal for surveillance networking
environment. Switching all DIP switches to on enables CCTV mode which gives
multi-function PoE + data extension, Port Isolation and QoS on the GS-1008P V2.
When using video surveillance systems for homes, business or institutions, the
CCTV mode provides better speeds for multicast viewing and easier installation.
Setting all DIP switches back to off quickly changes the GS-1008P V2 back to
normal for general-use data transmission.
Power and Data Distance Extension
The built-in DIP switch provides extended operation modes on switch 1 &
2. TheGS-1008PHE V2operates as a standard IEEE 802.at/af PoE Switch when
DIP switches are off. With switches on, theGS-1008PHE V2operates on
a per-port basis at 10Mbps duplex operation but can support 30-watt PoE power
output over a distance of up to 200 meters, overcoming the 100m limit on
Ethernet UTP cables. With this brand-new feature, theGS-1008PHE
V2provides an additional solution for 802.3at/af PoE distance extension
and saves costs of Ethernet cable
installation.
Innovative Port-based VLAN
Features
The GS-1008PHE V2 features port-based VLAN
where ports can be isolated from each other via DIP switch port 3. This can help
to prevent IP camera’s multicast or broadcast storms from affecting each
other.
Hardware QoS for Video & Voice
Traffic
Priority Supports 802.1p QoS via DIP switch
port 4. This ensures first priority for video and voice
traffic.
Plug & Play, No Installation
Required
Just plug Ethernet or PoE enabled devices
into the switch. Data and power can be transmitted through existing standard
Cat-5e Ethernet cables with no additional cables or configuration required. The
GS-1008PHE V2 reduces the difficulty, time and cost of network
setup.
Flexible Network Deployment &
Energy Efficient
A fast and effective solution when power
outlets are unavailable for your network devices. The switch additionally
supports IEEE 802.3az Energy Efficient Ethernet which allows for less power
consumption and reduced costs during periods of low data
activity.
Fan-less Quiet & Compact
Design
A fan-less design ensures quiet operation and
enables an even more compact design, keeping valuable desk space free in home or
small office environments.
Diagram
Spedifications
Hardware |
|
Ports |
8 RJ-45
10/100/1000Base-T ports |
|
4 RJ-45
10/100/10000Base-T PoE+ ports |
Transmission
Method |
Store and
forward |
LED
Indicators |
Power: Green
LED |
|
LNK/ACT: Green LED
(Port 1 Port 8) |
|
PoE: Green LED (Port 1
Port 4) |
|
PoE Alert: Green LED
(PoE overload alarm) |
Fan |
Fan-less |
DIP
Switch |
PoE Extend, VLAN,
QoS |
Power
Requirements |
AC-to-DC external power
adapter |
|
Input: 100-240V
AC |
|
Output: 55V DC/1.3A
(Total Power: 71.5W) |
Power
Consumption |
5W |
Dimensions (L x W x
H) |
165mm x118mm x
39mm |
Weight |
530g |
Performance |
|
Switching
Capacity |
16G |
MAC
Address |
8K |
Buffer
Memory |
128Kb |
Jumbo
Frames |
9KB |
Filtering / Forwarding
Rates |
1000Mbps port -
1488,000pps |
|
100Mbps port -
148,800pps |
|
10Mbps port -
14,880pps |
Power over
Ethernet |
|
Standard |
IEEE
802.3af |
|
IEEE
802.3at |
Power
Output |
Up to 30W per
port |
Pin
Assignment |
1/2(+),
3/6(-) |
PoE Power
Budget |
60W |
Environment |
|
Temperature |
Operating: 0 ~ 40
DegreeC |
|
Storage: -40 ~ 70
DegreeC |
Humidity
(Non-condensing) |
Operating: 10 ~
90% |
|
Storage: 5 ~
90% |
Standards
Compliance |
|
Standards |
IEEE 802.3 10BaseT
Ethernet |
|
IEEE 802.3u 100BaseTX
Fast Ethernet |
|
IEEE802.3ab
1000BASE-T |
|
IEEE 802.3af Power over
Ethernet (PoE) |
|
IEEE 802.3at Power over
Ethernet Plus (PoE+) |
|
IEEE 802.3x Full-duplex
and flow control |
|
IEEE 802.3az Energy
efficient Ethernet |
Certifications |
FCC, CE,
LVD |