All stock codes associated to this product
DV2925L, MODDV2925L, MOD-DV2925L, 4716779079548
Draytek DV2925L Vigor2925L Multi-WAN LTE
Router
Features
Vigor2925 LTE Series
Dual-WAN & Built-in LTE Load Balancing VPN Router
- Dual Gigabit Ethernet WAN
- Built-in LTE modem for cellular connectivity
- Up to 4 WAN for Load Balancing or Failover
- 50 concurrent VPN tunnels, including up to 25 concurrent SSL VPN
- SPI Firewall with Content Filtering by URL keyword, web category, and apps
- Central Management for VigorAP & Vigor Switch
- Compliant with Central Management Software VigorACS2
- Provide DrayDDNS service since firmware v3.8.4.2
About
Vigor2925 LTE Series is a firewall router that features all the specification
as Vigor2925 LTE Series, but builds in a 3G/4G/LTE modem that works with a stand
size SIM card, this provides the router wireless Internet connectivity without
the need of an external USB modem. Like Vigor2925 LTE Series, it has two Gigabit
Ethernet WAN ports which can be used for load balancing or failover. If you have
another SIM card, the USB port can also be used with a 3G/4G/LTE USB modem to
add extra Internet connectivity. Vigor2925 LTE Series offers features including
VPN, Firewall, Content Filtering, and Central Management Solution for Vigor
access points and switches, which makes it the perfect solution for a
small-medium business.
WAN Load Balancing & Failover
Vigor2925 LTE Series has two Gigabit Ethernet WAN ports that can be used for
any types of connection, and a built-in LTE modem to connect to the cellular
network, An additional 3G/4G/LTE USB modem can also be attached to the USB port
of the router to add a backup wireless connectivity. In fact, all of the WAN
interfaces can be configured to operate in either Load Balancing mode, which
will be active all the time, or in Failover mode, which will be active only when
detecting connection loss or heavy load on the primary connection.
On Vigor2925 LTE Series, Load Balancing can be set in either IP-based mode,
which means the packets destined to different IP address will be distributed
across different WANs; or in Session-based mode, which means the packets belong
to different sessions can take different paths, this allows a multiple-session
connection to be established across multiple WANs, and the maximum data rate
will be all the WAN's bandwidth combination. Policy-based Load Balancing is also
supported so that you may specify the path for some certain packets.
Built-in LTE & Cellular Connectivity
Vigor2925 LTE Series has built-in an LTE modem that accepts the standard size
SIM cards. It works with worldwide cellular networks including 4G and 3G, thus
can automatically fall back to 3G when 4G is not available. While using the data
services of the SIM cards, the SMS service is also supported. Receiving and
sending SMS messages can be done from the router's Web User Interface, you may
also configure the router to send notifications via SMS, moreover, commands can
be sent to the router via SMS to initiate a router reboot or status report
Flexible LAN Management
The 5-port Gigabit Ethernet switch on the LAN side provides high-speed
connectivity for the servers and PCs on the local network, and the Virtual LAN
(VLAN) features allow you to separate the LAN clients into different logical
domains thus to increase the security and network efficiency.
Vigor2925 LTE Series supports 802.1Q standard and can build a Tag-based VLAN
system with an 802.1Q-support switch, Port-based VLAN is also supported that
each LAN port can be configured as a member of different VLAN and be isolated
from each other without the use of VLAN tag. Moreover, up to 5 IP subnet can be
set up on Vigor2925 LTE Series, that allows each VLAN to use a different IP
addressing space.
Vigor2925 LTE Series also supports LAN DNS and Conditional DNS forwarding
that allows you to control the domain name resolution for the LAN clients, also
you can use the router as an internal name server and make the LAN servers to be
accessed by a hostname which is easier to remember.
Firewall & Security
Vigor2925 LTE Series supports Stateful Packet Inspection (SPI) Firewall and
flexible filtering rules, it can accept or deny packets based on the source,
destination, port number, and its application. IP-based restrictions can be set
to filter certain HTTP traffic as well as various application software, and
prevent time and network resource wasting on inappropriate network activities.
With an annual subscription to CYREN Web Content Filtering service, you may
also filter the websites by their categories, and set up restrictions to block
the whole categories of websites (such as Social Networking, Gambling.. etc.)
without the need to specify every site you would like to block. The CYREN
service is constantly updating the categorization, and a free 30-day trial is
included in each new router.
Comprehensive VPN
Vigor2925 LTE Series supports both LAN-to-LAN VPN and Remote Dial-in VPN, up
to 50 VPN tunnels can be set up simultaneously. All the industry standard
tunneling protocols are supported, including PPTP, L2TP, IPsec, and GRE, and
they are compatible with 3rd party VPN devices.
Vigor2925 LTE Series also supports SSL VPN - a type of VPN based on the very
common encryption method which is used by all the HTTPS websites. While the
traditional VPN protocols might be filtered by the firewall and NAT of public
networks, SSL VPN will be passed as long as the HTTPS is allowed. DrayTek also
offers free official client App for Windows, iOS, and Android.
VPN Redundancy is also supported by Vigor2925 LTE Series, this allows you
establish two VPN tunnels to the same remote network but through different WAN
interfaces to increase the reliability of VPN.
Central Management
Vigor2925 LTE Series can act as a Central Management portal for the other
Vigor devices on the network, including VigorAP, Vigor Switch, and even Vigor
Routers. With Central Management feature, device maintenance (such as firmware
upgrading, configuration backup and restore) and monitoring can all be done from
a single portal, which is the Web User Interface of Vigor2925 LTE Series.
Vigor2925 LTE Series can manage up to 20 VigorAP on its LAN and works as an
AP controller. Automatic Provisioning can be triggered when a VigorAP newly join
the network and this makes AP deployment much faster. You may also get the
client or traffic history of all the APs from Vigor2925 LTE Series, and set up
load balancing rules for the APs.
Central Switch Management allows you to manage up to 10 Vigor Switches from
Vigor2925 LTE Series, the status of every port can be directly viewed from the
router. Vigor2925 LTE Series also supports VLAN configuration for the switches,
setting that matches the router's VLAN settings and the switch hierarchy is
automatically provided which makes the VLAN configuration easier.
Specifications
Hardware
Interface
- 2 x GbE WAN port
- 1 x standard-sized SIM slot
- 5 x GbE LAN port
- 1 x USB 2.0 port
- Factory Reset Button
- Power On/Off Switch
Power
- DC 12V @1.5A – 2.0A
- Max. Power Consumption: 24 watts
Temperature
- Operating: 0°C ~ 45°C
- Storage: -25°C ~ 70°C
Humidity
- Operating: 10% ~ 90% (non-condensing)
Dimension (mm)
WAN
LTE
- LTE Category 4
- Max. Data Rate: 150 Mbps download & 50 Mbps upload
- LTE FDD Band: 1(2100MHz), 3(1800MHz), 7 (2600MHz), 8 (900MHz), 20 (800MHz)
- LTE FDD Band:
- 38(2600MHz), 40(2300MHz)
- WCDMA band: 1, 8
- GPRS/EDGE: 900, 1800 MHz
Ethernet Connection (IPv4)
- PPPoE Client
- DHCP Client
- Static IP
- PPTP/L2TP
- 802.1Q VLAN Tagging
- Triple-Play Applications
Ethernet Connection (IPv6)
- PPP
- DHCPv6 Client
- Static IPv6
- TSPC
- AICCU (AYIYA/Heartbeat)
- 6rd
- 6in4 Static Tunnel
Load Balance
- IP-based Load Balancing
- Session-based Load Balancing
- WAN Data Budget
Failover
- Failover by Link Failure
- Failover by Traffic Threshold
Connectivity Detection
- Failover by Link Failure
- Failover by Traffic Threshold
High Availability
- Method: Active-Standby /Hot-Standby
- Automatic Configuration Sync
- WCF License Key Sharing
LAN Managment
VLAN
- Up to 8 VLAN
- 802.1Q Tag-based VLAN
- Port-based VLAN
- DHCP Server
- Up to 5 IP Subnet
- Bind-IP-to-MAC
- Custom DHCP Option
Security
- Wired 802.1x authentication
DNS Control
- Local Name Server
- Conditional DNS Forwarding
Hotspot Portal
- Authentication by Click-Through, Social Login, and SMS PIN
- Custom Portal Page
- URL Redirection
- Walled-Garden
Routing
Static Route
- 30 IPv4 Static Routing Rules
- 40 IPv6 Static Routing Rules
- Inter-VLAN Routing
Dynamic Routing
Policy Routing
- 50 Route Policy
- Criteria: Protocol, Source IP, Destination IP, Destination Domain Name,
Destination Country, Destination Port
- Failover options
VPN
Performance
- Up to 50 concurrent tunnels
- Max. 25 concurrent SSL VPN
Protocols
- PPTP, L2TP, IPsec, L2TP over IPsec, SSL, GRE, IKEv2
- LAN-to-LAN VPN
- Teleworker-to-LAN VPN
Encryption
- MPPE 40/128 bit
- Hardware-based AES/DES/3DES
Authentication
- PAP, CHAP, MS-CHAP, MS-CHAPv2
- MD5, SHA-1
- Pre-Shared Key, Digital Signature (X.509)
- mOTP
Advanced
- Hub-and-Spoke Topology support
- DHCP over IPsec
- VPN Redundancy for Load Balancing or Failover
- Single-Armed VPN
Firewall
NAT
- One-to-One Port Redirection
- Range-to-Range Port Redirection
- Open Ports
- Port Triggering
- DMZ Host
- ALG: SIP, RTSP, FTP, TFTP, H.323
- VPN Pass-Through: PPTP, L2TP, IPsec UPnP
Firewall Filter
- IP-based Firewall Policy
- User-based Firewall Policy
- Object-based Configuration
- Schedule Enable/Disable
Content Filtering
- URL Keyword Filtering
- Category Filtering (subscription required)
- DNS Keyword Filtering
- Web Features Filtering
Attack Protection
Bandwidth Management
Bandwidth Policy
- Session Limit
- Bandwidth Limit
- IP-Based Policy
- Scheduled Enable/Disable
Quality of Service
- Layer 3 QoS (TOS/DSCP)
- 4-Level Priority with user-defined classification
- Bandwidth Borrowing
- Guaranteed bandwidth for VoIP traffic
- APP QoS
Cellular Services
- Sending & Receiving SMS
- SMS initiated Router Reboot
- Router status reporting via SMS
- SMS Quota Limit
Network Features
- Dynamic DNS
- DNS Security
- Bonjour
- IGMP Proxy
- IGMP Snooping
- SMB File Sharing
User Authentication
- Local User Database
- RADIUS Server
- Active Directory/LDAP
- TACACS+
- Internal RADIUS Server
Wireless LAN
Standards
- IEEE 802.11 b/g/n 2.4G
- Max. TX Power
- 19 dBm
SSID
- Up to 4 per radio
- SSID-based 802.1Q VLAN
Radio Management
- Auto Channel Selection
- Auto Channel Width (2.4G)
- Wi-Fi Scheduling
Security
- WEP, WEP-802.1x, WPA-PSK, WPA-802.1x, WPA2-PSK, WPA2-802.1x
- Hidden SSID
- Client Isolation
- Access Control per SSID
- WPS
Advanced
- Rate Control per SSID
- AirTime Fairness
- WMM
WDS
Management
Configuration
- Web Interface: HTTP, HTTPS
- Command-Line Interface: Telnet, SSH
- TR-069 via VigorACS
- Config File Export & Import
- Compliant with the Config file exported from Vigor2920
F/W Upgrade
Admin Access Control
- 2-level Administration Privilege
- Access from the Internet
- Access List
- Brute Force Protection
Monitoring
- Dashboard
- Syslog
- SMS/E-mail Alert
- TR-069 via VigorACS
- SNMP v2c, v3
Central Management
- Wireless Controller for up to 20 VigorAP
- 10 Vigor Switch
- 8 Vigor Router (CVM Feature)