All stock codes associated to this product
DXS360032S, DXS-3600-32S, 4258738, 790069393136
D-Link 24-Port Top of Rack 10 Gigabit Managed Switch with Expansion
Slot DXS-3600-32S
Overview
D-Links DXS-3600-32S 24-Port Top-of-Rack 10 Gigabit Stackable Managed Switch
with Expansion Slot is compact, high-performance switch that feature 10 Gigabit
Ethernet switching, routing, and very low latency.
The D-Link DXS-3600-32S 24-Port Top-of-Rack 10 Gigabit Managed Switch with
Expansion Slot is a compact, high-performance switch that feature very low
latency wire speed 10G Ethernet switching and routing. The 1U height and
selectable front-to-back or back-to-front air flow make the DXS-3600-32S is
suitable for enterprise and campus aggregation network environments. It has 24
fixed 10G SFP+ ports and can accommodate more ports with the addition of an
expansion module. The expansion modules not only provide extra 10G SFP+ ports,
but also increase flexibility by allowing 120G stacking or low-cost 10GBASE-T
connections for different applications.
Convenient Deployment
The DXS-3600-32S provides your network with high-performance 10G Ethernet
switching capacities of up to 960 Gbps and forwarding rates of up to 714 Mpps.
These switches feature hot-swappable power supplies and fan trays, which enable
the switches to have redundant, high-availability architecture. When inserting
two power modules, both power modules share the load and help to extend the
lifetime of the other. The DXS-3600 Series also features a modular fan design;
three fans can back up each other, providing 2+1 redundancy for the system. If a
fan fails or the temperature rises, the smart fans will adjust their speed
automatically.
Flexible Software
The DXS-3600-32S can be deployed using one of two different software images1.
The Standard Image (SI) features a wide range of Layer 2, VLAN, multicasting,
Quality of Service (QoS), security, data center, and static routing functions.
The Enhanced Image (EI) features comprehensive IPv4/v6 routing including RIP,
VRRP, OSPF, BGP, and L3 multicasting features such as IGMP, MLD, PIM-DM, SM,
SDM, SSM, and DVMRP. The Enhanced Image (EI) also supports L2/L3 MPLS VPN which
enables the DXS-3600-32S to be deployed as the core router of an enterprise
environment, or as an aggregation switch in an MPLS environment.
Data Center Features
Data Center Bridging (DCB) is an essential set of enhancements to Ethernet
for networking in data center environments. The DXS-3600-32S supports several
core components of Data Center Bridging (DCB) such as IEEE 802.1Qbb, IEEE
802.1Qaz, and IEEE 802.1Qau. IEEE 802.1Qbb (Priority-based Flow Control)
provides flow control to ensure there is no data loss during network congestion.
IEEE 802.1Qaz (Enhanced Transmission Selection) manages the allocation of
bandwidth based on different traffic classes. IEEE 802.1Qau (Congestion
Notification) provides congestion management for data flows within network
domains to avoid congestion. The DXS-3600-32S also supports cut-through
switching, which reduces latency when transmitting data in a
network.
Energy-Efficient
Front-to-back airflow optimises air circulation to provide more effective
cooling throughout rack systems in data centers where the switches are used when
compared to side-to-side airflow. The switches also feature built-in smart fans.
Internal heat sensors monitor and detect temperature changes and automatically
adjust the fan speed accordingly. At lower temperatures, the fans will run
slower, reducing both the switchs power consumption and noise.
Specifications
Type |
Managed |
Number of
ports |
16 to 30
ports |
Layer |
Layer
2+ |
Layer
3 |
Main type of
ports |
10GbE
SFP+ |
Type of uplink
ports |
Open
slot |
Switching
capacity |
960
Gbps |
Form
Factor |
Rackmountable |
Physical
stacking |
Up to 4
devices |
Up to 480 Gbps
bidirectional bandwidth |
Virtual stacking (up
to 32 devices) |
Yes |
MAC
address |
128K |
Spanning Tree
Protocol |
802.1D
STP |
802.1s
MSTP |
802.1w
RSTP |
Link
aggregation |
802.1AX |
VLAN group (max
static) |
4K |
VLAN
type |
GVRP |
MAC-based |
Port-based |
Protocol-based |
Advanced
VLAN |
Double VLAN
(Q-in-Q) |
Data Center
Bridging |
802.1Qaz |
802.1Qbb |
IPv4/IPv6 routing
table |
IPv4 -
16K |
IPv6 -
8K |
IPv4/IPv6 forwarding
table |
IPv4 -
8K |
IPv6 -
4K |
IP
interfaces |
256 |
Static route for
IPv4/IPv6 |
IPv4 -
1K |
Multicasting |
Yes |
PIM-SM |
Yes |
DVMRP
v3 |
Yes |
RIP
v1/v2 |
Yes |
OSPF |
Yes |
BGP |
Yes |
MPLS |
Yes |
VPLS |
Yes |
Number of QoS queues
per port |
8 |
CoS based on
contents |
Yes |
Bandwidth
control |
8 Kbps minimum
granularity |
Three colour
marker |
8 Kbps minimum
granularity |
ACL
type |
Egress |
Ingress |
VLAN-based |
ACL based on packet
contents |
Yes |
Time-based
ACL |
Yes |
Encryption protocol
supported |
SSH |
SSL
(v1/v2/v3) |
802.1X access
control |
Yes |
RADIUS/TACACS+
authentication |
Yes |
SNMP
(v1/v2c/v3) |
Yes |
RMON
v1/v2 |
Yes |
LLDP-MED |
Yes |