CPU | : | Support for Intel 9000 Processors and 8th Generation Intel Core i7 processors/Intel Core i5 processors/Intel Core i3 processors/Intel Pentium processors/Intel Celeron processors in the LGA1151 package |
| | L3 cache varies with CPU |
| | (Please refer "CPU Support List" for more information.) |
Chipset | : | Intel Z390 Express Chipset |
Memory | : | 4 x DDR4 DIMM sockets supporting up to 64 GB of system memory |
| | Dual channel memory architecture |
| | Support for DDR4 2666/2400/2133 MHz memory modules |
| | Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode) |
| | Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules |
| | Support for Extreme Memory Profile (XMP) memory modules |
| | (Please refer "Memory Support List" for more information.) |
Onboard Graphics | : | Integrated Graphics Processor-Intel HD Graphics support: |
| | 1x HDMI port, supporting a maximum resolution of 4096x2160@30 Hz |
| | *Support for HDMI 1.4 version and HDCP 2.2. |
| | Maximum shared memory of 1 GB |
Audio | : | Realtek ALC887 codec |
| | High Definition Audio |
| | 2/4/5.1/7.1-channel |
| | *To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver. |
| | Support for S/PDIF Out |
LAN | : | Realtek GbE LAN chip (10/100/1000 Mbit) |
Expansion Slots | : | 1x PCI Express x16 slot, running at x16 (PCIEX16) |
| | *For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. |
| | 2x PCI Express x16 slots, running at x4 (PCIEX4_1/PCIEX4_2) |
| | 3x PCI Express x1 slots |
| | (All of the PCI Express slots conform to PCI Express 3.0 standard.) |
Storage Interface | : | Chipset: |
| | 1x M.2 connector (Socket 3, M key, type 2242/2260/2280/22110 SATA and PCIe x4/x2 SSD support, prepared for Intel Hybrid SSD) |
| | 6x SATA 6Gb/s connectors |
| | Support for RAID 0, RAID 1, RAID 5, and RAID 10 |
| | *Refer to "1-7 Internal Connectors," for the installation notices for the M.2 and SATA connectors. |
| | Intel Optane Memory Ready |
Multi-Graphics Technology | : | Support for AMD Quad-GPU CrossFire and 2-Way AMD CrossFire technologies |
USB | : | Chipset: |
| | 8x USB 3.1 Gen 1 ports (6 ports on the back panel, 2 ports available through the internal USB header) |
| | 2x USB 2.0/1.1 ports available through the internal USB header |
Internal I/O Connectors | : | 1x 24-pin ATX main power connector |
| | 1x 8-pin ATX 12V power connector |
| | 1x 4-pin ATX 12V power connector |
| | 1x M.2 Socket 3 connector |
| | 6x SATA 6Gb/s connectors |
| | 1x CPU fan header |
| | 3x system fan headers |
| | 1x RGB LED strip header |
| | 1x front panel header |
| | 1x front panel audio header |
| | 1x USB 3.1 Gen 1 header |
| | 1x USB 2.0/1.1 header |
| | 1x S/PDIF Out header |
| | 1x Thunderbolt add-in card connector |
| | 1x Trusted Platform Module (TPM) header (2x6 pin, for the GC-TPM2.0_S module only) |
| | 1x serial port header |
| | 1x Clear CMOS jumper |
Back Panel Connectors | : | 1x PS/2 mouse port |
| | 1x PS/2 Keyboard port |
| | 1x HDMI port |
| | 6x USB 3.1 Gen 1 ports |
| | 1x RJ-45 port |
| | 3x audio jacks |
I/O Controller | : | iTE I/O Controller Chip |
H/W Monitoring | : | Voltage detection |
| | Temperature detection |
| | Fan speed detection |
| | Overheating warning |
| | Fan fail warning |
| | Fan speed control |
| | *Whether the fan speed control function is supported will depend on the fan you install. |
BIOS | : | 1x 128 Mbit flash |
| | Use of licensed AMI UEFI BIOS |
| | PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 |
Operating System | : | Support for Windows 10 64-bit |
Form Factor | : | ATX Form Factor |
| | 30.5cm x 23.0cm |