Specifications |
|
MBD-X9DRT-HIBQF
-O |
X9DRT-HIBQF
(Standard Retail Pack) |
MBD-X9DRT-HIBQF
-B |
X9DRT-HIBQF
(Bulk Pack) |
Physical
Stats |
Form
Factor |
Proprietary |
Dimensions |
6.8"
x 16.64" (17.2cm x 42.3cm) |
Processor/Cache |
CPU |
Dual
Socket R (LGA 2011) |
Intel
Xeon processor E5-2600 |
and E5-2600
v2 family |
(up to 135W TDP **) |
Note |
BIOS
version 3.0 or above is required |
Note |
**
Motherboard supports this maximum TDP. Please verify your system can
thermally support. |
Cache |
Up
to 30MB |
System
Bus |
QPI
up to 8 GT/s |
System
Memory |
Memory
Capacity |
8x
240-pin DDR3 DIMM slots |
Up
to 512GB DDR3 ECC LRDIMM |
Up
to 256GB DDR3 ECC RDIMM |
Up
to 64GB DDR3 ECC/non-ECC UDIMM |
Memory
Type |
1866/1600/1333/1066/800MHz*
ECC DDR3 SDRAM 72-bit, 240-pin gold-plated
DIMMs |
Support
ECC and non-ECC UDIMMs |
*
Maximum memory speed may be capped by CPU. Please verify that the chosen
CPU can support desired memory speed. |
DIMM
Sizes |
32GB,
16GB, 8GB, 4GB, 2GB, 1GB, |
64GB
LRDIMM |
Memory
Voltage |
1.5
V, 1.35 V |
Error
Detection |
Corrects
single-bit errors |
Detects
double-bit errors (using ECC memory) |
On-Board
Devices |
Chipset |
Intel
C602 chipset |
Infiniband |
Mellanox
ConnectX-3 QDR Infiniband 40Gbps Controller (IB
Firmware) |
SATA |
SATA
2.0 & 3.0 with RAID 0, 1, 5, 10 |
IPMI |
Support
for Intelligent Platform Management Interface
v.2.0 |
IPMI
2.0 with virtual media over LAN and KVM-over-LAN
support |
Nuvoton
WPCM450 BMC |
Network
Controllers |
Intel
i350 Dual Port Gigabit Ethernet |
Virtual
Machine Device Queues reduce I/O overhead |
Supports
10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45
output |
1x
Realtek RTL8201N PHY (dedicated IPMI) |
Video |
Matrox
G200eW |
Input
/ Output |
SATA |
5
SATA 2.0 ports (3Gb/s) |
2
SATA 3.0 ports (6Gb/s) |
LAN |
2
RJ45 Gigabit Ethernet LAN ports |
1
RJ45 Dedicated IPMI LAN port |
USB |
3
USB 2.0 ports (2 rear + 1 Type-A) |
Video |
1
VGA port |
Serial
Port / Header |
1
Fast UART 16550 port |
Infiniband |
1
external QSFP Infiniband connector |
DOM |
1
DOM (Disk on Module) power connector |
TPM |
1
TPM Header |
Chassis
(Optimized for X9DRT-HIBQF ) |
2U
Chassis |
CSE-217HD-R1K28B |
CSE-217HQ-R1620B |
CSE-827HD-R1K28B |
CSE-827HQ-R1620B |
Important
Chassis Notes |
To
support the new generation Intel Xeon processor-based
motherboards, Revision M chassis is recommended.
Please talk to your sales representative for
details. |
SuperServer(s) with
X9DRT-HIBQF |
Model(s) |
SYS-2027TR-H72QRF |
SYS-2027TR-HTQRF |
SYS-2027TR-H71QRF |
SYS-2027TR-H70QRF |
SYS-2027TR-D70QRF |
SYS-6027TR-HTQRF |
SYS-6027TR-HTFRF |
SYS-6027TR-H71QRF |
SYS-6027TR-H70QRF |
SYS-6027TR-DTQRF |
SYS-6027TR-D71QRF |
SYS-6027TR-D70QRF |
Expansion
Slots |
PCI-Express |
1
x24 left hand riser + 1 x8 slot for SMCI AOC |
(Both
CPUs need to be installed for full access to PCI-E slots and onboard
controllers. See manual block diagram for
details.) |
System
BIOS |
BIOS
Type |
128Mb
SPI Flash EEPROM with AMI BIOS |
BIOS
Features |
Plug
and Play (PnP) |
APM
1.2 |
PCI
2.3 |
ACPI
1.0 / 2.0 / 3.0 / 4.0 |
USB
Keyboard support |
SMBIOS
2.7.1 |
UEFI
2.3.1 |
Management |
Software |
SuperDoctor
III |
Watch
Dog |
NMI |
IPMI
1.5 / 2.0 |
Power
Configurations |
ACPI
/ APM Power Management |
Power-on
mode for AC power recovery |
PC
Health Monitoring |
Voltage |
Monitors
for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby,
VBAT, Memory Voltages. |
5+1
Phase-switching voltage regulator |
FAN |
Status
monitor for speed control |
Pulse
Width Modulated (PWM) fan connectors |
Temperature |
Monitoring
for CPU and chassis environment |
CPU
thermal trip support |
Thermal
Monitor 2 (TM2) support |
PECI |
LED |
CPU
/ System Overheat LED |
Suspend
Static indicator LED |
UID/Remote
UID |
Other
Features |
RoHS |
Operating
Environment |
Operating
Temperature Range |
10C
- 35C (50F - 95F) |
Non-Operating
Temperature Range |
-40C
- 70C (-40F - 158F) |
Operating
Relative Humidity Range |
8%
- 90% (non-condensing) |
Non-Operating
Relative Humidity Range |
5%
- 95% (non-condensing) |