|
Specifications |
|
|
MBD-X9DRW-7TPF
-B |
X9DRW-7TPF
(Bulk Pack) |
|
Physical
Stats |
|
Form
Factor |
Proprietary
WIO |
|
Dimensions |
12.8"
x 16.5" (32.5cm x 41.9cm) |
|
Processor/Cache |
|
CPU |
Dual
Socket R (LGA 2011) |
|
Intel
Xeon processor E5-2600 |
|
and E5-2600 v2 family |
|
(up to 135W TDP **) |
|
Note |
BIOS
version 3.0 or above is required |
|
Note |
**
Motherboard supports this maximum TDP. Please verify your system can
thermally support. |
|
Cache |
Up
to 30MB |
|
System
Bus |
QPI
up to 8 GT/s |
|
System
Memory |
|
Memory
Capacity |
16x
240-pin DDR3 DIMM slots |
|
Up
to 1TB DDR3 ECC LRDIMM |
|
Up
to 512GB DDR3 ECC RDIMM |
|
Up
to 128GB DDR3 ECC/non-ECC UDIMM |
|
Memory
Type |
1866/1600/1333/1066/800MHz*
ECC DDR3 SDRAM 72-bit, 240-pin gold-plated
DIMMs |
|
Support
ECC and non-ECC UDIMMs |
|
*
Maximum memory speed may be capped by CPU. Please verify that the chosen
CPU can support desired memory speed. |
|
DIMM
Sizes |
32GB,
16GB, 8GB, 4GB, 2GB, 1GB, |
|
64GB
LRDIMM |
|
Memory
Voltage |
1.5
V, 1.35 V |
|
Error
Detection |
Corrects
single-bit errors |
|
Detects
double-bit errors (using ECC memory) |
|
On-Board
Devices |
|
Chipset |
Intel
C602 chipset |
|
AHCI
SATA |
SATA
2.0 3Gbps with RAID 0, 1, 5, 10 |
|
SATA
3.0 6Gbps with RAID 0, 1, 5, 10 |
|
SAS |
SAS2
from Broadcom 2208 (1GB cache) |
|
HW
RAID 0, 1, 5, 6, 10, 50, 60 support |
|
Supports
up to 16 devices as default, more HDD devices support is also available as
an option * |
|
*
For special sku, please contact your Supermicro
Sales. |
|
IPMI |
Support
for Intelligent Platform Management Interface
v.2.0 |
|
IPMI
2.0 with virtual media over LAN and KVM-over-LAN
support |
|
Nuvoton
WPCM450 BMC |
|
Network
Controllers |
Broadcom
BCM 57810S Dual Port 10 Gigabit Ethernet Supports
SFP+ |
|
Intel
i350 Dual Port Gigabit Ethernet |
|
Virtual
Machine Device Queues reduce I/O overhead |
|
Supports
10Base-T, 100BASE-TX, and 1000BASE-T, RJ45
output |
|
1x
Realtek RTL8201N PHY (dedicated IPMI) |
|
(Both
CPUs need to be installed for LAN ports 1 and 2 to be
enabled) |
|
Video |
Nuvoton
WPMC450 with Integrated Graphics |
|
Input
/ Output |
|
AHCI
SATA |
2x
SATA 3.0 ports (6Gbps) |
|
4x
SATA 2.0 ports (3Gbps) |
|
SCU
SATA |
4x
SATA 2.0 ports (3Gbps) |
|
SAS |
8
SAS2 ports (6Gb/s) |
|
LAN |
2
SFP+ 10GbE LAN ports |
|
2
RJ45 Gigabit Ethernet LAN ports |
|
1
RJ45 Dedicated IPMI LAN port |
|
USB |
5
USB 2.0 ports total |
|
(2
rear + 2 via header + 1 Type A) |
|
Video |
1
VGA port |
|
Serial
Port / Header |
1
Fast UART 16550 port / 1 Header |
|
TPM |
1
TPM Header |
|
Chassis
(Optimized for X9DRW-7TPF ) |
|
1U
Chassis |
CSE-119TQ-R700WB |
|
CSE-819TQ-R700WB |
|
2U
Chassis |
CSE-219A-R920WB |
|
CSE-829TQ-R920WB |
|
Important
Chassis Notes |
To
support the new generation Intel Xeon processor-based
motherboards, Revision M chassis is recommended. Please
talk to your sales representative for details. |
|
Please
order the optional I/O shield (2 LAN + 2TG) separately if the order is not
bulk. |
|
SuperServer(s) with
X9DRW-7TPF |
|
Model(s) |
SYS-1027R-72RFTP |
|
SYS-6017R-72RFTP |
|
Expansion
Slots |
|
PCI-Express |
1
PCI-E 3.0 (x48) for left hand side |
|
riser card support |
|
1
PCI-E 3.0 (x16) for right hand side |
|
riser card support |
|
System
BIOS |
|
BIOS
Type |
128Mb
SPI Flash EEPROM with AMI BIOS |
|
BIOS
Features |
Plug
and Play (PnP) |
|
APM
1.2 |
|
PCI
2.3 |
|
ACPI
1.0 / 2.0 / 3.0 / 4.0 |
|
USB
Keyboard support |
|
SMBIOS
2.7.1 |
|
UEFI
2.3.1 |
|
Management |
|
Software |
SuperDoctor
III |
|
Watch
Dog |
|
NMI |
|
Optional
IPMI 1.5 / 2.0 |
|
Power
Configurations |
ACPI
/ APM Power Management |
|
Power-on
mode for AC power recovery |
|
PC
Health Monitoring |
|
Voltage |
Monitors
for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby,
VBAT, Memory Voltages. |
|
5+1
Phase-switching voltage regulator |
|
FAN |
6x
4-pin fan headers (up to 6 fans) |
|
6x
fans with tachometer monitoring |
|
Status
monitor for speed control |
|
Pulse
Width Modulated (PWM) fan connectors |
|
Temperature |
Monitoring
for CPU and chassis environment |
|
CPU
thermal trip support |
|
Thermal
Control for 8x Fan Connectors |
|
Thermal
Monitor 2 (TM2) support |
|
PECI |
|
LED |
CPU
/ System Overheat LED |
|
Suspend
static indicator LED |
|
UID/Remote
UID |
|
Other
Features |
Chassis
intrusion detection |
|
Chassis
intrusion header |
|
SDDC
Support |
|
RoHS |
|
Operating
Environment |
|
Operating
Temperature Range |
10C
- 35C (50F - 95F) |
|
Non-Operating
Temperature Range |
-40C
- 70C (-40F - 158F) |
|
Operating
Relative Humidity Range |
8%
- 90% (non-condensing) |
|
Non-Operating
Relative Humidity Range |
5%
- 95%
(non-condensing) |
