|
CPU |
LGA1200
package: |
|
1.
11th Generation Intel Core i9 processors / Intel Core i7
processors / Intel Core i5 processors |
|
2.
10th Generation Intel Core i9 processors / Intel Core i7
processors / Intel Core i5 processors / Intel Core i3
processors/ Intel Pentium processors /
Intel Celeron processors* |
|
*
Limited to processors with 4 MB Intel Smart Cache,
Intel Celeron G5xx5 family. |
|
3.
L3 cache varies with CPU |
|
(Please
refer to "CPU Support List" for more
information.) |
|
Chipset |
1.
Intel B560 Express Chipset |
|
Memory |
1.
11th Generation Intel Core i9/i7/i5
processors: |
|
Support
for DDR4 5333(O.C.) / DDR4 5133(O.C.) / DDR4 5000(O.C.) / 4933(O.C.) /
4800(O.C.) / 4700(O.C.) / 4600(O.C.) / 4500(O.C.) / 4400(O.C.) /
4300(O.C.) / 4266(O.C.) / 4133(O.C.) / 4000(O.C.) / 3866(O.C.) /
3800(O.C.) / 3733(O.C.) / 3666(O.C.) / 3600(O.C.) / 3466(O.C.) /
3400(O.C.) / 3333(O.C.) / 3300(O.C.) / 3200 / 3000 / 2933 / 2800 / 2666 /
2400 / 2133 MHz |
|
2.
10th Generation Intel Core i9/i7
processors: |
|
Support
for DDR4 2933/2666/2400/2133 MHz memory
modules |
|
3.
10th Generation Intel Core i5/i3
/Pentium/Celeron processors: |
|
Support
for DDR4 2666/2400/2133 MHz memory modules |
|
4.
4 x DDR4 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity)
of system memory |
|
5.
Dual channel memory architecture |
|
6.
Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in
non-ECC mode) |
|
7.
Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory
modules |
|
8.
Support for Extreme Memory Profile (XMP) memory
modules |
|
(Please
refer "Memory Support List" for more
information.) |
|
Onboard
Graphics |
Integrated
Graphics Processor-Intel HD Graphics
support: |
|
1.
1 x D-Sub port, supporting a maximum resolution of 1920x1200@60
Hz |
|
2.
1 x DVI-D port, supporting a maximum resolution of 1920x1200@60
Hz |
|
*
The DVI-D port does not support D-Sub connection by
adapter. |
|
3.
1 x DisplayPort, supporting a maximum resolution of 4096x2304@60
Hz |
|
*
Support for DisplayPort 1.2 version and HDCP
2.3 |
|
*
When the D-Sub port and DisplayPort are connected at the same time, images
will output from the DisplayPort only. |
|
4.
1 x HDMI port, supporting a maximum resolution of 4096x2160@30
Hz |
|
*
Support for HDMI 1.4 version and HDCP 2.3. |
|
(Graphics
specifications may vary depending on CPU
support.) |
|
Support
for up to 3 displays at the same time |
|
Audio |
1.
Realtek Audio CODEC |
|
2.
High Definition Audio |
|
3.
2/4/5.1/7.1-channel |
|
4.
Support for S/PDIF Out |
|
LAN |
1.
Realtek GbE LAN chip (1000 Mbit/100 Mbit) |
|
Expansion
Slots |
1.
1 x PCI Express x16 slot, running at x16
(PCIEX16) |
|
*
For optimum performance, if only one PCI Express graphics card is to be
installed, be sure to install it in the PCIEX16
slot. |
|
(The
PCIEX16 slot conforms to PCI Express 4.0
standard.)(Note) |
|
2.
1 x PCI Express x16 slot, running at x4
(PCIEX4) |
|
3.
2 x PCI Express x1 slots |
|
(The
PCIEX4 and PCIEX1 slots conform to PCI Express 3.0
standard.) |
|
Storage
Interface |
CPU: |
|
1.
1 x M.2 connector (Socket 3, M key, type 2260/2280/22110 PCIe 4.0 x4/x2
SSD support) (M2P_CPU)(Note) |
|
Chipset: |
|
1.
1 x M.2 connector (Socket 3, M key, type 2260/2280/22110 SATA and PCIe 3.0
x4/x2 SSD support) (M2A_SB) |
|
2.
6 x SATA 6Gb/s connectors |
|
*
Refer to "1-7 Internal Connectors," for the installation notices for the
M.2 and SATA connectors. |
|
Intel Optane
Memory Ready |
|
*
System Acceleration with Intel Optane Memory enabled on the M2P_CPU
connector only. |
|
USB |
Chipset: |
|
1.
6 x USB 3.2 Gen 1 ports (4 ports on the back panel, 2 ports available
through the internal USB header) |
|
2.
6 x USB 2.0/1.1 ports available through the internal USB
headers |
|
Chipset+USB
2.0 Hub: |
|
1.
2 x USB 2.0/1.1 ports on the back panel |
|
Internal
I/O Connectors |
1.
1 x 24-pin ATX main power connector |
|
2.
1 x 8-pin ATX 12V power connector |
|
3.
1 x CPU fan header |
|
4.
1 x water cooling CPU fan header |
|
5.
3 x system fan headers |
|
6.
1 x addressable LED strip header |
|
7.
1 x RGB LED strip header |
|
8.
2 x M.2 Socket 3 connectors |
|
9.
6 x SATA 6Gb/s connectors |
|
10.
1 x front panel header |
|
11.
1 x front panel audio header |
|
12.
1 x USB 3.2 Gen 1 header |
|
13.
3 x USB 2.0/1.1 headers |
|
14.
1 x S/PDIF Out header |
|
15.
2 x Thunderbolt add-in card connectors |
|
16.
1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI
2.0 module only) |
|
17.
1 x serial port header |
|
18.
1 x parallel port header |
|
19.
1 x Clear CMOS jumper |
|
20.
1 x Q-Flash Plus button |
|
All fan headers are subject to support AIO_Pump,
Pump and high performance fan with the capability of delivering up to
2A/12V @ 24W. |
|
Back
Panel Connectors |
1.
2 x USB 2.0/1.1 ports |
|
2.
1 x PS/2 keyboard/mouse port |
|
3.
1 x D-Sub port |
|
4.
1 x DVI-D port |
|
5.
1 x DisplayPort |
|
6.
1 x HDMI port |
|
7.
4 x USB 3.2 Gen 1 ports |
|
8.
1 x RJ-45 port |
|
9.
6 x audio jacks |
|
I/O
Controller |
1.
iTE I/O Controller Chip |
|
H/W
Monitoring |
1.
Voltage detection |
|
2.
Temperature detection |
|
3.
Fan speed detection |
|
4.
Overheating warning |
|
5.
Fan fail warning |
|
6.
Fan speed control |
|
*
Whether the fan speed control function is supported will depend on the
cooler you install. |
|
BIOS |
1.
1 x 256 Mbit flash |
|
2.
Use of licensed AMI UEFI BIOS |
|
3.
PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI
5.0 |
|
Unique
Features |
1.
Support for APP Center |
|
*
Available applications in APP Center may vary by motherboard model.
Supported functions of each application may also vary depending on
motherboard specifications. |
|
@BIOS |
|
EasyTune |
|
Fast
Boot |
|
Game
Boost |
|
ON/OFF
Charge |
|
RGB
Fusion |
|
Smart
Backup |
|
System
Information Viewer |
|
2.
Support for Q-Flash Plus |
|
3.
Support for Q-Flash |
|
4.
Support for Xpress Install |
|
Bundled
Software |
1.
Norton Internet Security (OEM version) |
|
2.
Realtek 8118 Gaming LAN bandwidth Control
Utility |
|
Operating
System |
1.
Support for Windows 10 64-bit |
|
Form
Factor |
1.
ATX Form Factor; 30.5cm x 22.5cm |
|
Note |
Supported
by 11th Generation processors only. |
|
Remark |
1.
Due to different Linux support condition provided by chipset vendors,
please download Linux driver from chipset vendors' website or 3rd party
website. |
|
2.
Most hardware/software vendors may no longer offer drivers to support
Win9X/ME/2000/XP. If drivers are available from the vendors, we will
update them on the GIGABYTE
website. |
