|
CPU |
CPU
Model |
Intel
Xeon D-1541 |
|
CPU
Quantity |
1 |
|
CPU
Architecture |
64-bit |
|
CPU
Frequency |
8-core
2.1 (base) / 2.7 (turbo) GHz |
|
Hardware
Encryption Engine (AES-NI) |
Yes |
|
Memory |
System
Memory |
16
GB DDR4 ECC RDIMM |
|
Memory
Module Pre-installed |
16
GB (16 GB x 1) |
|
Total
Memory Slots |
4 |
|
Maximum
Memory Capacity |
128
GB (32 GB x 4) |
|
Notes |
For
more information on memory upgrade limitations,
visit here. |
|
Please
select Synology memory modules for optimum compatibility and reliability.
Synology will not provide complete product warranty or technical support
if non-Synology memory modules are used for memory
expansion. |
|
For
more information on the recommended memory configurations,
visit here. |
|
Synology
reserves the right to replace memory modules with the same or higher
frequency based on supplier's product life cycle status. Rest assured that
the compatibility and stability have been strictly verified with the same
benchmark to ensure identical performance. |
|
Storage |
Drive
Bays |
12 |
|
Maximum
Drive Bays with Expansion Unit |
96
(RX1222sas/RX1217sas x 7) / 180 (RX2417sas x
7) |
|
Compatible
Drive Type* (See all supported drives) |
3.5"
SAS HDD |
|
2.5"
SAS HDD |
|
2.5"
SAS SSD |
|
3.5"
SATA HDD |
|
2.5"
SATA HDD |
|
2.5"
SATA SSD |
|
Maximum
Single Volume Size* |
1
PB (64 GB memory required, for RAID 6 groups
only) |
|
200
TB (32 GB memory required) |
|
108
TB |
|
Hot
Swappable Drive |
Yes |
|
Notes |
"Compatible
drive type" indicates drives that have been tested to be compatible with
Synology products. This term does not indicate the maximum connection
speed of each drive bay. |
|
Each
internal volume (may consist of multiple drives) is expandable up to 108
TB (with memory less than 32 GB) or 200 TB (with memory equal to or
greater than 32 GB). |
|
For
more information on Peta Volume,
visit here. |
|
External
Ports |
RJ-45
1GbE LAN Port |
4
(with Link Aggregation / Failover support) |
|
RJ-45
10GbE LAN Port |
2
(with Link Aggregation / Failover support) |
|
USB
3.2 Gen 1 Port* |
2 |
|
Expansion
Port |
1 |
|
Notes |
The
USB 3.0 standard was renamed to USB 3.2 Gen 1 by the USB Implementers
Forum (USB-IF) in 2019. |
|
PCIe |
PCIe
Expansion |
2
x Gen3 x8 slots (x8 link) |
|
File
System |
Internal
Drives |
Btrfs |
|
EXT4 |
|
External
Drives |
Btrfs |
|
EXT4 |
|
EXT3 |
|
FAT |
|
NTFS |
|
HFS+ |
|
exFAT |
|
Notes |
exFAT
Access can be installed for free from Package Center in DSM 7.0. In DSM
6.2 or earlier versions, exFAT Access needs to be purchased in Package
Center. |
|
Appearance |
Form
Factor (RU) |
2U |
|
Size
(Height x Width x Depth) |
88
mm x 482 mm x 724 mm |
|
Weight |
14.5
kg |
|
Rack
Installation Support* |
4-post
19" rack (Synology Rail Kit - RKS-02) |
|
4-post
19" rack (Synology Rail Kit - RKS1317) |
|
Notes |
The
rail kit is sold separately |
|
Others |
System
Fan |
80
mm x 80 mm x 4 pcs |
|
Fan
Speed Mode |
Full-Speed
Mode |
|
Cool
Mode |
|
Quiet
Mode |
|
Easy
Replacement System Fan |
Yes |
|
Power
Recovery |
Yes |
|
Noise
Level* |
49.8
dB(A) |
|
Scheduled
Power On / Off |
Yes |
|
Wake
on LAN / WAN |
Yes |
|
Power
Supply Unit / Adapter |
500
W |
|
Redundant
Power Supply |
Yes |
|
AC
Input Power Voltage |
100
V to 240 V AC |
|
Power
Frequency |
50/60
Hz, Single Phase |
|
Power
Consumption* |
137.17
W (Access) |
|
70.95
W (HDD Hibernation) |
|
British
Thermal Unit |
468.04
BTU/hr (Access) |
|
242.09
BTU/hr (HDD Hibernation) |
|
Notes |
Power
consumption is measured when it is fully loaded with Western Digital 1TB
WD10EFRX hard drive(s). |
|
Noise
Level Testing Environment: Fully loaded with Seagate 2TB ST2000VN000 hard
drive(s) in the idle state. Two G.R.A.S. Type 40AE microphones, each set
up 1 meter away from the Synology NAS at the front and rear. Background
noise: 16.49-17.51 dB(A); Temperature: 24.25-25.75C; Humidity:
58.2-61.8% |
|
Temperature |
Operating
Temperature |
0C
to 35C (32F to 95F) |
|
Storage
Temperature |
-20C
to 60C (-5F to 140F) |
|
Relative
Humidity |
5%
to 95% RH |
|
Certification |
FCC |
|
CE |
|
BSMI |
|
EAC |
|
CCC |
|
KC |
|
UL |
|
VCCI |
|
RCM |
|
Warranty |
5
Years |
|
Notes |
The
warranty period starts from the purchase date as stated on your purchase
receipt. (Learn more) |
|
Environment |
RoHS
Compliant |
|
Packaging
Content |
Main
Unit X 1 |
|
Accessory
Pack X 1 |
|
AC
Power Cord X 2 |
|
Quick
Installation Guide X 1 |
|
Optional
Accessories |
DDR4
ECC RDIMM: D4RD-2666-16G*/D4RD-2666-32G |
|
Expansion
Units: RX2417sas/RX1222sas/RX1217sas |
|
3.5"
SATA HDD: HAT5300 |
|
2.5"
SATA SSD: SAT5200 |
|
M.2
SSD & 10GbE Combo Adapter
Card: E10M20-T1 |
|
M.2
SSD Adapter Card: M2D20 |
|
25GbE
Network Interface Card: E25G21-F2 |
|
10GbE
Network Interface
Card: E10G21-F2/E10G18-T2/E10G18-T1 |
|
Rail
Kit Sliding: RKS1317 |
|
Rail
Kit Sliding: RKS-02 |
|
VisualStation: VS960HD/VS360HD |
|
Surveillance
Device License Pack |
|
Notes |
It
is required to use D4RD-2666-16G with identical memory modules of the same
capacity and frequency. For more information,
visit here. |
