|
OVERVIEW |
|
|
UPC
Code |
37332119254 |
|
UPS
Type |
Line-Interactive |
|
INPUT |
|
|
Rated
input current (Maximum Load) |
7A
(Maximum input with 300W UPS and 1310W surge-only
loads) |
|
Nominal
Input Voltage(s) Supported |
230V
AC |
|
Nominal
Input Voltage Description |
Accepts
inputs between 187 and 265V for AC mode
operation |
|
UPS
Input Connection Type |
C14
inlet |
|
UPS
Input Connection Description |
C14
inlet accepts user-supplied AC power cord with country-specific plug;
Includes 2 1.8m C13 to C14 power cables |
|
Input
Circuit Breakers |
7A
thermal breaker |
|
Input
Phase |
Single-Phase |
|
OUTPUT |
|
|
Output
Volt Amp Capacity (VA) |
500 |
|
Output
Watt Capacity (Watts) |
300 |
|
Power
Factor |
0.6 |
|
Nominal
Voltage Details |
230v
nominal inverter output voltage |
|
Frequency
Compatibility |
50
/ 60 Hz |
|
Frequency
Compatibility Details |
Automatic
frequency selection; 50Hz (46-54Hz) / 60Hz
(56-64Hz) |
|
Output
Voltage Regulation (Line Mode) |
-8%,
+15% |
|
Output
Voltage Regulation (Battery Mode) |
+/-
5% |
|
Included
Output Power Cables |
Two
1.8m IEC320-C13 to C14 load jumper cables |
|
UPS
Output Receptacles (Surge Suppression Only) |
5
UPS outlets, 1 surge-only outlet |
|
Load
Management Receptacles |
One
switchable single-outlet C13 load bank |
|
Hot-Swap
PDU options |
PDUBHV10
(2U / 8 C13 outlets) |
|
Output
AC Waveform (AC Mode) |
Sine
wave |
|
Output
AC Waveform (Battery Mode) |
PWM
sine wave |
|
Nominal
Output Voltage(s) Supported |
220V;
230V; 240V |
|
Output
Receptacles |
(6)
C13 |
|
Output
Amp Capacity |
2.17A
maximum (UPS outlets) / 7A maximum (UPS + Surge-only
Outlets) |
|
Individually
Controllable Load Banks |
Yes |
|
BATTERY |
|
|
Full
Load Runtime (min.) |
3
min. (300w) |
|
Half
Load Runtime (min.) |
14
min. (150w) |
|
Expandable
Runtime |
No |
|
DC
System Voltage (VDC) |
12 |
|
Battery
Recharge Rate (Included Batteries) |
Less
than 12 hours to 90% |
|
Battery
Access |
Battery
access door |
|
Internal
UPS Replacement Battery Cartridge |
IMPORTANT
BATTERY REPLACEMENT INFORMATION > Use Tripp Lite RBC12V-1U replacement
battery for SMX500RT1U models with the Series Number AG-03AD listed on the
UPS nameplate (Sold since 2021); For all prior versions of SMX500RT1U, use
Tripp Lite RBC62-1U replacement battery; Contact Tripp Lite
customer service for additonal information |
|
Battery
Replacement Description |
Hot-swappable,
user replaceable batteries |
|
VOLTAGE
REGULATION |
|
|
Voltage
Regulation Description |
Automatic
voltage regulation (AVR) maintains line power operation with input voltage
as low as 187 |
|
Undervoltage
Correction |
Input
voltages between 187 and 215 are boosted by
14% |
|
USER
INTERFACE, ALERTS & CONTROLS |
|
|
Switches |
2
Switches control off/on power status and alarm-cancel/self-test
operation |
|
Alarm
Cancel Operation |
Power-fail
alarm can be silenced using alarm-cancel
switch |
|
Audible
Alarm |
Audible
alarm indicates power-failure, overload and low-battery
conditions |
|
LED
Indicators |
5
LEDs indicate line power, battery power, overload, voltage regulation and
battery low/replace status |
|
SURGE
/ NOISE SUPPRESSION |
|
|
UPS
AC Suppression Joule Rating |
480 |
|
EMI
/ RFI AC Noise Suppression |
Yes |
|
PHYSICAL |
|
|
Primary
Form Factor |
Rackmount;
Tower |
|
Included
Mounting Accessory Description |
Included
mounting brackets provide front-rail installation in 2 or 4 post racks,
plus upright tower configurations |
|
Installation
Form Factors Supported with Included Accessories |
2
post 19 inch rackmount; 2 post front mount; 4 post 19 inch rackmount;
Tower |
|
Minimum
Required Rack Depth (cm) |
37.08 |
|
Primary
UPS Depth (mm) |
286 |
|
Primary
UPS Height (mm) |
44 |
|
Primary
UPS Width (mm) |
440 |
|
Rack
Height |
1U |
|
Shipping
Dimensions (hwd / cm) |
10.67
x 40.13 x 53.34 |
|
Shipping
Weight (kg) |
8.03 |
|
UPS
Housing Material |
Steel |
|
UPS
Power Module Dimensions (hwd, cm) |
4.39
x 43.99 x 28.60 |
|
UPS
Power Module Weight (kg) |
8.03 |
|
ENVIRONMENTAL |
|
|
Operating
Temperature Range |
+32
to +104 degrees Fahrenheit / 0 to +40 degrees
Celsius |
|
Storage
Temperature Range |
+5
to +122 degrees Fahrenheit / -15 to +50 degrees
Celsius |
|
Relative
Humidity |
0
to 95%, non-condensing |
|
AC
Mode BTU / Hr. (Full Load) |
35 |
|
AC
Mode Efficiency Rating (100% Load) |
97% |
|
Audible
Noise |
45
dBA maximum, front side 1m |
|
COMMUNICATIONS |
|
|
Network
Management Cards |
WEBCARDLX |
|
Network
Monitoring Port Description |
Supports
detailed monitoring of UPS and site power
conditions |
|
PowerAlert
Software |
For
local monitoring via the UPSs built-in communication ports, download
PowerAlert Local software at
https://www.tripplite.com/poweralert |
|
Communications
Cable |
USB
and DB9 cabling included |
|
WatchDog
Compatibility |
Supports
Watchdog application, OS and hard-reboot restart options for remote
applications |
|
Network
Management Card Description |
Network
management card optional |
|
Communications
Interface |
USB
(HID enabled); DB9 Serial; EPO (emergency power off); Slot for SNMP/Web
interface |
|
LINE
/ BATTERY TRANSFER |
|
|
Transfer
Time |
2-4
milliseconds |
|
Low
Voltage Transfer to Battery Power (Setpoint) |
187 |
|
High
Voltage Transfer to Battery Power (Setpoint) |
264 |
|
FEATURES
& SPECIFICATIONS |
|
|
Grounding
Lug |
Back
panel grounding lug |
|
Cold
Start (Startup in Battery Mode During a Power
Failure) |
Cold-start
operation supported |
|
High
Availability UPS Features |
Auto
Probe Monitoring and Reboot (requires WEBCARDLX); Automatic Voltage
Regulation (AVR); Hot swappable batteries; Remote management; Surge/noise
protection |
|
Green
Energy-Saving Features |
Greater
than 95% efficiency - GREEN UPS; Individually controllable load
banks |
|
STANDARDS
& COMPLIANCE |
|
|
UPS
Certifications |
CE;
ROHS (Restriction of Hazardous Substances); Tested to CSA (Canada); Tested
to EAC (Belarus, Kazakhstan, Russia); Tested to UL1778
(USA) |
|
Certification
Details |
Series
Number (s) AG-03AD; Safety Standards (Canada) CAN/CSA-C22.2 No. 107.3-14
(3rd Ed); Safety Standards (U.S.) UL1778:2014 (5th Ed) R10.17; Safety
Standards (International) EN62040-1:2008+A1:2013; IEC62040-1:2008 (1st
Ed)+A1:2013; EMI/EMC Standards Class B; EN62040-1:2006; IEC62040-2:2005
(2nd Ed)+Cor.1:2011 |
|
WARRANTY |
|
|
Product
Warranty Period (International) |
2-year
limited warranty |
