| 
              3ware 9650SE Features  
            
              - 8th-generation StorSwitch non-blocking switched architecture. 
 
              - On-board I/O RISC processor and RAID offload provides true hardware RAID.
 - SCSI device driver model to take advantage of the benefits of SCSI using inexpensive Serial ATA drives .  
              - Bootable array support for greater fault tolerance. 
 
              - Variable stripe size for performance tuning by application. 
 
              - 64-bit LBA support. 
 
              - ATA pass-through mode support. 
 
              - Up to 512MB DDR2 533 memory with ECC protection. (see table below) 
 
              - 32 pooled DMA channels. 
 
              - Complete configuration management suite. 
 - 3ware BIOS Manager 2 (3BM2) easy to use BIOS configuration tool.  - 3ware Disk Manager 2 (3DM2) browser-based management tool.  - Command Line Interface (CLI) scriptable configuration tool.  
              - SNMP support. 
 
              - SMTP support for email/pager notification. 
 
              - ATA/6 and Out of band (OOB) staggered drive spin-up support. 
 
              - Auto carving allows LUNs > 2TB to be divided into multiple units for legacy operating systems limited to 2TB max. per LUN. 
 
              - Battery Backup Unit (BBU) support. 
 
              - Multiple logical unit sizes and RAID levels on one card. 
 
              - Multiple card support within a system for large storage requirements. 
 
              - Hot-swap and hot-spare support for data availability. 
 
              - Dynamic sector repair for robust data protection. 
 
              - S.M.A.R.T. disk drive monitoring for reliability. 
 
              - Emergency Flash Recovery protects against failed firmware upgrade. 
 
              - Drive activity LED support. 
 
              - Online Capacity Expansion and RAID Level Migration. 
 
              - Enhanced data protection with write journaling for non-redundant arrays and accidental drive removal. 
 
              - Drive insertion and removal notification. 
 
              - Array/Drive Status and drive identification LED support. (requires 3ware Chassis Control Unit-enabled backplane) 
 
              - Chassis Control Unit for enclosure management via I2C. 
 
             
            Operating System Support 
            Microsoft Windows 2003/XP/2000, Red Hat Linux, SuSE Linux, Fedora Linux, 2.4 Linux kernel, 2.6 Linux kernel, FreeBSD; 32/64-bit driver support for Windows, Linux and FreeBSD For complete OS listing, Go to: www.3ware.com/support/OS-Support.asp 
           |