All stock codes associated to this product
ZMWB5PLUS, ZM-WB5-PLUS
Zalman’s creative dimple-type processing technology allows lightness in weight and excellent cooling performance.
Pure copper-base material water block provides excellent heat transfer, and anodized water block cover prevents corrosion.
Connection fitting for the hose is a single-body cover in the form of two connection structure types, which allows for various types of hoses to be used.
* Notice
This CPU water block is a component for water cooling systems for CPUs and cannot be used independently. It must be used with a water cooling system such as ZALMAN's RESERATOR 1 Plus/ RESERATOR 1 V2/RESERATOR 2/ RESERATOR XT Water Cooling System.
Intel (Socket 775) Supports all Speeds
AMD (Socket AM2/754/939/940)
Dimensions 63(W) x 63(L) x 40(H) mm
Weight 160g
Base Material Pure Copper (Base), Pure Aluminum (Cover)
Compatible Tubes (Outer x Inner) 14 x 10mm, 13 x 10mm, 13 x 9mm, 12 x 9mm, 12 x 8mm, 11 x 8mm, 10 x 8mm
Common Components
- CPU Water Block Assembly
- Two(2) Clips
- Four(3) Bolts
- Three(3) Clip Bolts
- Thermal Grease
- Two(2) Tube Clamps A (13.8 x 9.5mm)
- Two(2) Tube Clamps B (11.5 x 8mm)
- Paper Washer
- User’s Manual
Components for Intel (Socket 775)
- Clip Support for Socket 775
- Back plate for Socket 775
- Four(4) Fixing Bolts for Clip Support
Components for AMD (Socket AM2/754/939/940)
- Clip for AMD
Zalman affixes a Computer Noise Prevention System (CNPS) mark to all components used for noiseless computers.
Test the product for leakage away from the system before installing it on the system. Once no leakage is confirmed, proceed with the installation and use.
Used approved coolant for computer water-cooling to prevent corrosion.
Use coolant tubes listed under the compatibility list.
Do not install the product if it interferes with any mother board components.
Design of this product does not allow product disassembly. Do not disassemble the product.
