All stock codes associated to this product
RPPE8T/4, RP-PE8T/4
The device supports PoE, which supplies power for connected devices via CAT 5 and above twisted cables. By integrating the data transmitting cable and power cord, it eliminates the effort constructing your network. You could easily connect a Wireless AP or a VoIP phone to this switch without looking outlets for them. Over current protection and circuit shorting protection are also supported to ensure the safety. The switch is plug-and-play without any software to configure and also fully compliant with all kinds of network protocols.
FEATURES
* Compliant with IEEE 802.3af PoE standard (DTE power via MDI)
* Provides 4 PoE ports with classification identify
* Supports 15.4W maximum per PoE port
* Supports over current protection and circuit shorting protection
* Wire-speed packet filtering and forwardingrate
* Store-and-forward architecture filters fragment & CRC error packets
* Supports 1K MAC entries
* Supports extensive LED indicators for network diagnostics
SPECIFICATIONS
Standards
IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE 802.3af standards
Interface
10/100Mbps RJ-45 NWay ports
Network speed
10Mbps and 100Mbps Duplex mode: Full and Half
Buffer Memory
768K Bits for the whole system
Filtering/Forwarding Rate
10Mbps: 14,880pps/14,880pps
100Mbps: 148,800pps/148,800pps
LED IndicatorsSystem:
Power (Green)
Port: Link/Act (Green)
PoE Act (Green)
Power Consumption
64.32W (max. with 4 x 15.4 w PoE Device connected)
4.848W(max. with no PoE Device connected)
Power SupplyInternal power supply
AC100~240V
EnviromentOperating Temperature
0C~40C
Operating Humidity
10% ~ 90% (Non-Condensing)
Dimensions
262 * 184 * 41 mm
Certifications
FCC, CE