Addonics ADS3GX4R5-ML SATA RAID Controller - 4-Port SATA-II (via Multilane) - PCI-X

Specifications

PCI-X model

• Compliant with PCI-X Specification, revision 1.0a
• Supports 133 MHz PCI-X with 64-bit data
• All registers appear in unified memory space
• Full-chip command completion status accessible with single PCI-X burst access
• I/O port access to register space
• Low Profile PCI form Factor
• Serial ATA (SATA) 3.0 Gbps (300MB/s) and 1.5 Gbps (150MB/s)
• 48-bit LBA support
• Built in firmware RAID support for RAID 0, 1, 10, 5 and JBOD (JBOD can combine multiple hard drives into one large drive or set to run as individual drive with no RAID)
• Compliant with SATA 1.0, and ATA, SATA II Extensions to SATA 1.0:
• Port Multiplier with FIS-based switching
• Native Command Queuing with non-zero offsets
• Four independent DMA channels with 2KB FIFO per channel
• Independent command fetch, scatter/gather, and command execution
• Multimaster I2C interface
• Supports ATAPI devices: CD-ROM, DVD-ROM, etc.
• Supports hot-plug of SATA devices
• Supports spread spectrum clocking to reduce EMI
• JTAG Boundary Scan compliant with IEEE std 1149.1
• Supports First-party DMA commands for Native Command Queuing (NCQ)
• Plesiochronous, Single PLL architecture, 1 PLL for 4 ports
• Output Swing Control
• Supports four independent Serial ATA channels
• Independent Link, Transport, data FIFO, command fetch, scatter/gather, and command execution
• 31 Commands and Scatter/Gather Tables per Port
• Four Pin header on board for Device LED connection
• Protocol Override per Command
• Staggered Spin-up Control
• Drivers for Windows 2000 ,XP and 2003 Server