IMG 1 of 2
No Longer Available

Part Number:
127754
(?) Brand:
Manuf No:
ADSA4R-ML
ADSA4RML
Shipping Weight:
0.5 KG (Includes product packaging)
Estimate Shipping
All stock codes associated to this product
, ADSA4RML, ADSA4R-ML
Incorporating the latest SATA Multilane connector, this Addonics family of controllers not only provides the fast SATA performance but also support connecting 4 SATA ports externally via a single Infiniband cable. Choice of PCI-X with RAID5/JBOD or PCI with RAID, an external Disk Array storage system such as the Addonics Storage Tower can now be connected to a system with a reliable and clean cable management system.
 
Product Feature
  • 4X Multilane connector with thumb screw for secure connection. Connect up to 4 external SATA devices to system via 1 Infiniband cable
  • Maximum data transfer up to 1.5Gbits/sec per port on PCI slot and up to 3 Gbits/sec per port on PCI-X slot
  • Fits standard height or low profile PC
  • PCI-X model
    • Silicon Image chip set SiI 3124
    • Built in firmware RAID support for RAID 0, 1, 10, 5 and JBOD
    • JBOD can combine multiple hard drives into one large drive or set to run as individual drive
    • Backward compatible to PCI slot
  • PCI-model
    • Silicon Image Chip set Sil 3114
    • Built in firmware RAID support for RAID 0, 1, 10 or 1 + S
    • Can be set up as 4 independent ports with no RAID

Specifications

PCI model

  • Serial ATA (SATA) 1.5 Gbps (150MB/s)
  • Compliant with SATA 1.0 specification
  • 48-bit LBA support
  • Four independent DMA channels with 256B FIFO per channel
  • Virtual DMA in PCI with serial link in legacy PIO mode
  • Supports command buffering for ATA TF shadow registers
  • Supports ATAPI devices: CD-ROM, DVD-ROM, etc.
  • Hot-Plug capable
  • Supports SATA active signal for 4 separate LEDs
  • Built-in firmware RAID support for RAID 0, 1, 10 or 1+S
  • Supports Spread Spectrum in receiver
  • Independent 256-byte FIFOs (32 bit * 64 deep) per Serial ATA channel for host reads and writes
  • Compliant with PCI Specification, revision 2.2
  • Low Profile PCI form factor
  • Integrated PCI DMA engines
  • Four Pin header on board for LED connection
  • 32 bit, 33/66MHz fully compliant PCI host interface
  • Supports Windows 98, Millennium, NT 4.0, 2000, XP, 2003, Linux
  • Acts as NON-RAID when BIOS not configured RAID

No additional files, specification sheets, guides or documentation found for product.

Warranty: 1 Year Return to Base

Full manufacturers warranty details are available at the manufacturers (Addonics) web site.

Unless otherwise specified Techbuy is normally your first point of contact for warranty related returns, further information regarding our warranty policies and consumer guarantees is available on our policies and service & support pages.

To apply for return of a product just go to our returns page.

These terms are in addition to and do not affect any terms, conditions, guarantees and warranties implied by law.

Visitor Reviews

[ There are no visitor reviews for this product yet]

Review Product
Click on a thumbnail to view it below

No related products found.

 
L7: 1 | TM: 0 | LM: 0 | TY: 0 | T: 696
We accept the following with No surcharge on VISA, Mastercard and Paypal!
� Techbuy Pty Ltd 2000 - 2026 All rights reserved.
All prices shown on techbuy.com.au are in $AUD and inclusive of GST. Prices and availability are subject to change without prior notice. Images displayed are accurate to the best of our knowledge and we will not be held responsible for purchases based soley on these images. All brands and names are trademarks of their respective companies. Shipping Australia wide to all metro and regional areas (Sydney, Melbourne, Brisbane, Adelaide, Perth) and Internationally. For more information, please see our usage policies.