MB-X8STi-F | Supermicro X8STi-F Motherboard

Physical Stats

• ATX

• 12" x 9.6" (30.5cm x 24.4cm)

Processor/Cache

• LGA 1366 Socket
• Intel Core i7-965 Extreme Edition
• Intel Core i7 series
• Intel Xeon 5500 series
• Intel Xeon 3500 series

• QPI (up to 6.4 GT/s)

System Memory

• Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC / non-ECC Un-Buffered memory
• Three Channel memory bus
• 6 DIMM sockets

• 1333 / 1066 / 800MHz Un- Buffered ECC / non-ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs

• 256MB, 512MB, 1GB, 2GB, 4GB

• 1.5 V

• Corrects single-bit errors
• Detects double-bit errors (using ECC memory)
• Supports Intel x4 and x8 Single Device Data Correction (SDDC)

On-Board Devices

• Intel X58 Express chipset
• ICH10R

• Intel ICH10R SATA (3.0Gbps) Controller
• RAID 0, 1, 5, 10 support

• Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• Winbond WPCM450 BMC

• 2x Intel 82574L Gigabit Ethernet Controllers
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
• 1x Realtek RTL8201N PHY (dedicated IPMI)

• Matrox G200eW 8 MB DDR2

• Winbond 83627DHG chip

• CK505

Input / Output

• 6 SATA ports
• 6 SATA hard drives supported

• 1 Floppy controller; 1.44 MB

• 2x RJ45 LAN ports

• 2x USB rear ports
• 2x USB on-board
• 2x USB internal header(4 ports)
• Total 8 USB 2.0 Compliant

• 1x VGA port

• PS/2 keyboard and mouse ports

• 1x Fast UART 16550 serial port
• 1x internal header

I/O Panel

• CSE-811TQ-280
• CSE-813MTQ-280C

• To ensure system stability, a 550W (minimum) ATX power supply
  [4-pin (+12V), 8-pin (+12V) and 24-pin are required]

Expansion Slots

• 1 (x16) PCI-e 2.0 slot
• 1 (x8) PCI-e slot

• 1x 32-bit PCI slot

System BIOS

• 32Mb SPI Flash EEPROM with AMI BIOS

• DMI 2.3
• PCI 2.2
• ACPI 1.0 / 2.0
• USB Keyboard support
• SMBIOS 2.3

Management

• IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
• Super Doctor III
• Watch Dog
• NMI

• ACPI / ACPM Power Management
• Main Switch Override Mechanism
• Wake-On-LAN (WOL) header
• Keyboard Wakeup from Soft-Off
• Power-on mode for AC power recovery
• Internal/External modem ring-on

PC Health Monitoring

• Monitors for CPU Cores, +1.8V, +3.3V, +5V, 12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
• 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V

• Total of six fan headers supporting up to 6 fans
• Six 4-pin fan headers
• 6x fans with tachometer status monitoring
• Status monitor for speed control
• Status monitor for on/off control
• Support 3-pin fans (w/o speed control)
• Low noise fan speed control
• Pulse Width Modulated (PWM) fan connectors

• Monitoring for CPU and chassis environment
• CPU thermal trip support
• FC temperature sensing logic
• Thermal Monitor 2 (TM2) support
• PECI

• CPU / System Overheat LED
• +5V Standby alert LED

• Chassis intrusion detection
• Chassis intrusion header

Operating Environment / Compliance

• RoHS Compliant 6/6, Pb Free

• Operating Temperature: 10to 35C (50to 95F)
• Non-operating Temperature: -40to 70C (-40to 158F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5 to 95% (non-condensing)