The features16 IEEE 802.3af Power over Ethernet (PoE) ports which supply electricity of up to 15.4 watts per port. It can convert standard 90~260V/AC power into low-voltage DC that runs over an existing LAN cable to supply the power for IEEE 802.3af compliant network accessories. The also features PoE detection to verify whether the connected device is IEEE 802.3af compliant or not. If it is not a PoE device (PE), only the data will be sent through LAN cable. The can connect with different PoE products such as Access Points, IP cameras or IP phones. It is a supremely viable solution when power outlets are difficult to install or are out of reach.
The ES-5816P features16 IEEE 802.3af Power over Ethernet (PoE) ports which supply electricity of up to 15.4 watts per port. It can convert standard 90~260V/AC power into low-voltage DC that runs over an existing LAN cable to supply the power for IEEE 802.3af compliant network accessories. The ES-5816P also features PoE detection to verify whether the connected device is IEEE 802.3af compliant or not. If it is not a PoE device (PE), only the data will be sent through LAN cable. The ES-5816P can connect with different PoE products such as Access Points, IP cameras or IP phones. It is a supremely viable solution when power outlets are difficult to install or are out of reach.
No Special Networking Cable Required
Just use the standard Cat-5 Ethernet cable to link between the ES-5816P and the powered devices (PE). This Ethernet cable can transmit both data and power. No power wire is needed for the powered devices (PE). This reduces installation time and cost.
Supports Smart Features
The ES-5816P Web smart features can be managed through a Web Browser. The smart features include simple QoS/CoS applications and basic monitoring tools to improve network efficiency. The ES-5816P also supports bandwidth control and port based VLAN. Through a Web interface, an administrator can set up VLANs to segregate traffic and QoS to prioritize mission-critical data. All of these features offer extra protection on the network edge. Best of all, the password-protected configuration interface can be accessed remotely increasing the IT manager's mobility.
Supports Auto-MDI/MDI-X
Every port of the ES-5816P can automatically detect the type of cable. There is no need to choose crossover or parallel cables when you are connecting this switch to another switch or to a computer.
Supports Auto-Negotiation
Ports of the ES-5816P can automatically detect whether the connected network devices are running at 10Mbps, 100Mbps or Half/Full-Duplex mode. The ES-5816P can also adjust the speed and mode accordingly.
Supports Non-Blocking wire speed
The ES-5816P receives and forwards traffic seamlessly with its non-blocking wire-speed. Every port of the ES-5816P has speeds of up to 200Mbps in full-duplex mode simultaneously. This feature provides full wire speed to the connected devices and allows you to run a high speed network smoothly.
Supports Store and Forward Architecture
With the store and forward architecture, the ES-5816P can maximize network performance while minimizing the propagation of bad network packets.
Features:
- Complies with IEEE 802.3/802.3af/802.3u/802.3x/802.1p/802.1q standards
- Supplies 48V/DC with 15.4W output per port
- Store-and-Forward architecture
- Provides port based remote power On/Off to restart connected PoE devices individually
- Supports Auto MDI/MDI-X and Auto-Negotiation
- Supports IGMP snooping to optimize network performance
- Supports 16 port based VLAN and 20 Tag Base VLAN groups
- Supports 2 Trunking groups (4 ports per group and up to 2 groups for each device)
Specifications:
Standards
|
IEEE 802.3af Power over Ethernet IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100BaseTX Fast Ethernet ANSI / IEEE 802.3 NWay auto-negotiation IEEE 802.3x Flow Control in full duplex Collision / Carrier sense based backpressure in half duplex IEEE 802.1p QoS IEEE 802.1Q VLAN Tag
|
Features
|
Number of Ports: 16 PoE ports 10/100BaseT/T(X) MAC Address: 4K Buffer Memory: 1.5 Mb Transmission Method: Store and Forward
|
Smart Features
|
Port Security Filter:
TCP/UDP port based
MAC Address based
IP Address based VLAN Setting:
Port Based VLAN
Tag Based VLAN ( 20 entries )
VLAN ID (Up to 4094K ) QoS: ? Priority ( Port Based / TOS / Diffserv /DSCP/IPv4/ IPv6) ? Class of Service Configuration ? TCP/UDP Port Based Management: ? Password-protected Access, ? On /Off PoE Port Settings, ? Web-base Management, ? Graphic User Interface ? Bandwidth Control ? Broadcast Storm Control ? Port Mirroring ? Port Configuration ? Programmable aging timer ? IGMP Snooping ? Trunk ( 4 Ports per Group, 2 Group per Device ) ? Provide DHCP Client ? Firmware Update ( Web Base / TFTP )
|
Filtering/Forwarding Rates
|
100Mbps port - 148,800pps 10Mbps port - 14,880pps
|
Transmission Media
|
10BaseT Cat. 3, 4, 5 UTP/STP 100BaseTX Cat. 5 UTP/STP
|
|
Per Port: Link/Act, PoE Act/Status Per Unit: Power |
Power Input
|
100~240V/AC, 50~60Hz |
Powe Output
|
48V/DC Per Port Output 15.4 W Max Per Port 16 Ports at Full 15.4 W Output Supported |
Power Consumption
|
250 Watts (Max)
|
Dimension
|
440 220 42 (L x W x H)
|
Weight
|
3.8 kg
|
Operating Temperature
|
0 to 60?
|
Storage Temperature
|
-20 to 90?
|
Humidity
|
10 to 90% RH (non-condensing)
|
Certifications
|
FCC Class A, CE
|