All stock codes associated to this product
DGS363028SC, DGS-3630-28SC, DL15891, 3701323, 790069425608
Overview
- 20 Ports Gigabit SFP Slots + 4 Combo 10/100/1000 Base-T/SFP Port + 4 10G
SFP+ Slots.
- Physical stack up to 9 units, 432 Gigabit ports, up to 80 Gbps per device
physical stacking bandwidth.
- Support Virtual stack of up to 32 units using Single IP Management (SIM).
- Support ITU-T G.8032 Ethernet Ring Protection Switching (ERPS).
- Flexible software options with Standard Image (SI) and Enhanced Image (EI)
for Advance Features.
- Supports 802.1X user authentication via TACACS+ and RADIUS servers.
- Offers extensive VLAN support including GVRP, 802.1Q VLAN to enhance
security and performance.
- Robust set of QoS/CoS solutions for critical network services (VoIP, ERP,
Intranet, conferencing).
- Support 802.1 ag Connectivity Fault Management (CFM) and 802.3 ah Ethernet
OAM.
- Support Data Center Bridging Standard IEEE 802.1Qbb, Priority-based Flow
Control (PFC) for 10G Ports.
The DGS-3630 Series Layer 3 Stackable Managed Switches are a range of
switches designed for Small Medium Businesses (SMBs), Small Medium Enterprises
(SMEs), enterprises, and ISPs. They deliver high performance, flexibility, fault
tolerance, and advanced software features for maximum return on investment. With
Gigabit Ethernet SFP, 10 GbE SFP+, security features, and advanced Quality of
Service (QoS), the DGS-3630 Series can act as core, distribution or access layer
switches. High port densities, switch stacking, and easy management make the
DGS-3630 Series suitable for a variety of applications.
Standard, Enhanced, and MPLS Images
The DGS-3630 Series is designed for use with three different software images:
the Standard Image (SI), the Enhanced Image (EI), and the MPLS Image (MI). The
Standard Image provides core SMB and SME functionality, such as L2 switching,
entry-level routing, L2 multicast, advanced QoS, Operations, Administration, and
Maintenance (OAM), and robust security features. The Enhanced Image supports
full L3 routing for enterprise integration, including OSPF, BGP, VRF-Lite and L3
multicast. The MPLS Image offers VPN services for ISPs, including IS-IS and MPLS
L2/L3 VPN. With multiple software images, only the required features need to be
installed, providing a flexible approach to software management.
High Availability and Flexibility
The DGS-3630 Series includes stacking technology, which allows multiple
switches to be combined to form a single physical or virtual stack. This
increases redundancy over multiple physical units, simplifies management, and
provides a single IP address to manage all members in the stack. Up to 9
switches can be combined using Direct Attach Cables to make up to 432 Gigabit
Ethernet ports available, allowing switching capacity to be increased with
demand. The Switch Resource Management (SRM) feature allows the hardware table
size to be changed, so that switch functions can be optimized based on the use
of the switch. There are 3 modes: IP Mode, LAN Mode, and L2 VPN Mode, which
modify the size of the Layer 2 and 3 tables for optimum efficiency.
Security, Performance &Availability
The DGS-3630 Series provides a complete set of security features including
multi-layer Access Control Lists (ACLs) and 802.1X user authentication via
TACACS+ and RADIUS. The DGS-3630 Series also offers extensive VLAN support,
including GVRP and 802.1Q VLAN to enhance security and performance. A robust set
of QoS features help ensure that critical network services such as Voice over IP
and video conferencing are given high priority through the network. The D-Link
Safeguard Engine increases the switchs reliability, serviceability, and
availability by preventing malicious flooding traffic caused by worms or virus
attacks.
D-Link Green Technology
The DGS-3630 Series features D-Link Green technology, which includes a
power-saving mode, smart fan feature, reduced heat dissipation, and cable length
detection. The power-saving feature automatically powers down ports that have no
link or link partner, and ensures that LEDs are shut off when not needed. The
smart fan3 feature allows for the built-in fans to automatically turn on only at
a certain temperature, providing continuous, reliable, and ecofriendly operation
of the switch.
Versatile Management
The DGS-3630 Series provides the D-Link Network Assistant Utility, an
industry-standard CLI, and an intuitive web-based management interface that
enables administrators to set up and remotely manage their networks. Support for
SNMP allows centralized management of a large number of devices and out-of-band
management is available via a dedicated console port. A mini-USB console port
allows the DGS-3630 Series to be managed without any extra connectors, and a USB
Type A port can be used to store logs, configuration, and firmware images. The
DHCP auto-configuration and autoimage features can also be used to deploy
multiple switches automatically, saving costs for mass deployment.
Specifications
Interfaces
10/100/1000BASE-T Ports
20
(DGS-3630-28TC)
44 (DGS-3630-52TC)
Gigabit SFP Ports
20
(DGS-3630-28SC)
Combo 10/100/1000BASE-T or SFP Ports
4 (all models)
10
Gigabit SFP+ Ports
4 (all models)
Console Port
RJ45 and Mini USB
console ports for out-of-band CLI management
Management Port
10/100/1000BASE-T RJ45 Ethernet for out-of-band IP management
Alarm Port
RJ45
USB Port
USB 2.0 Type A
Optional Redundant Power
Supply
DPS-500A
Performance
Switch Capacity
128 Gbps (DGS-3630-28TC)
128 Gbps
(DGS-3630-28SC)
176 Gbps(DGS-3630-52TC)
Packet Forwarding Rate
95.24
Mpps (DGS-3630-28TC)
95.24 Mpps (DGS-3630-28SC)
130.95
Mpps(DGS-3630-52TC)
Packet Buffer
4 MBytes (DGS-3630-28TC)
4 MBytes
(DGS-3630-28SC)
4 MBytes(DGS-3630-52TC)
MAC Address Table
68K
entries2 (DGS-3630-28TC)
68K entries2
(DGS-3630-28SC)
68K entries2 (DGS-3630-52TC)
IPv4 Routing Table
16K entries (DGS-3630-28TC)
16K entries (DGS-3630-28SC)
16K
entries(DGS-3630-52TC)
IPv6 Routing Table
7K entries
(DGS-3630-28TC)
7K entries (DGS-3630-28SC)
7K
entries(DGS-3630-52TC)
IPv4 Forwarding Table
32K entries2
(DGS-3630-28TC)
32K entries2 (DGS-3630-28SC)
32K
entries2(DGS-3630-52TC)
IPv6 Forwarding Table
16K
entries2 (DGS-3630-28TC)
16K entries2
(DGS-3630-28SC)
16K entries2(DGS-3630-52TC)
Jumbo Frame Size
12 KBytes (DGS-3630-28TC)
12 KBytes (DGS-3630-28SC)
12
KBytes(DGS-3630-52TC)
Physical and Environmental
MTBF
300,190 hours (DGS-3630-28TC)
280,612 hours
(DGS-3630-28SC)
263,936 hours(DGS-3630-52TC)
Acoustics
52.7 dB(A)
(DGS-3630-28TC)
56 dB(A) (DGS-3630-28SC)
53.9 dB(A)(DGS-3630-52TC)
Heat
Dissipation
145 BTU/hr (DGS-3630-28TC)
217 BTU/hr (DGS-3630-28SC)
212
BTU/hr(DGS-3630-52TC)
Power Input
100 to 240 VAC, 50/60 Hz
Max Power
Consumption
42.4 W (DGS-3630-28TC)
63.6 W (DGS-3630-28SC)
62.0
W(DGS-3630-52TC)
Standby Power Consumption
28.1 W (DGS-3630-28TC)
30.1
W (DGS-3630-28SC)
36.0 W(DGS-3630-52TC)
Dimensions
17.4 x 10.2 x 1.73
inches (441 x 260 x 44 mm)
Weight
8.25 lbs (3.74 kg)
(DGS-3630-28TC)
8.36 lbs (3.79 kg) (DGS-3630-28SC)
8.91 lbs
(4.04kg)(DGS-3630-52TC)
Ventilation
2 Smart Fans3
Operating
Temperature
23F to 122F (-5C to 50C)
Storage Temperature
-40F to 158F
(-40C to 70C)
Operating Humidity
10% to 95% RH
Storage Humidity
5%
to 95% RH
Safety Certifications
cUL, CB, CE, CCC, BSMI
EMI/EMC
CE,
FCC Class A, C-Tick, VCCI, BSMI, CCC
Software Features
Standard Image (SI)
Stackability
Physical stacking
Up to 80G stacking
bandwidth
Up to 9 switches in a stack
Ring/chain topology
support
Virtual Stacking/clustering of up to 32 units
Supports D-Link
single IP Management
Up to 20 Gbps stacking bandwidth
L2 Features
MAC Address Table : up to 68K
entries2
Flow Control
802.3x Flow Control when using Full
Duplex
HOL Blocking Prevention
Spanning Tree Protocol
802.1D
STP
802.1w RSTP
802.1s MSTP
Root Guard
Loop Guard
Jumbo Frame: up
to 12 KBytes
802.1AX Link Aggregation
Max. 32 groups per device, 8 ports
per group
ERPS (Ethernet Ring Protection Switching) version 2
Port
Mirroring
Supports One-to-One, Many-to-One
Supports Mirroring for
Tx/Rx/Both
Supports 4 mirroring groups
Flow Mirroring
Supports
Mirroring for Rx
VLAN Mirroring
RSPAN
L2 Protocol Tunneling
VLAN
802.1Q
802.1v Protocol-based VLAN
Double VLAN
(Q-in-Q)
Port-based Q-in-Q
Selective Q-in-Q
Port-based
VLAN
MAC-based VLAN
Subnet-based VLAN
Private VLAN
VLAN
Group
Max. 4K VLAN groups
Max. 4094 VIDs
Multicast VLAN (ISM VLAN for
IPv4/IPv6)
Voice VLAN
Auto Surveillance VLAN
VLAN Trunking
GVRP: Up
to 4K dynamic VLANs
Asymmetric VLAN
L2 Multicast
MLD Snooping
MLD v1/v2
Snooping
Supports up to 4K MLD groups2
Host-based MLD Snooping
Fast Leave
Supports 64 static MLD groups
MLD Snooping Querier
Per VLAN
MLD Snooping
MLD Proxy Reporting
IGMP Snooping
IGMP
v1/v2/v3
Supports up to 8K MLD groups2
Supports 64 static IGMP
groups
Per VLAN IGMP Snooping
IGMP Snooping Querier
Host-based IGMP
Snooping Fast Leave
PIM Snooping
L3 Features
IPv4 ARP/IPv6 ND: support up to
32K/16K2
512 Static ARP
Gratuitous ARP
IP
Interface
Supports 256 interfaces
Loopback Interface
Proxy
ARP
Support local ARP proxy
IPv6
Tunneling
Static
ISATAP
GRE
6to4
VRRP v2/v3
IP Helper
L3 Routing
Supports 16K hardware routing entries shared
by IPv4/IPv6
1 entry consumed by each IPv4 route
2 entries consumed by
each IPv6 route
Supports up to 32K hardware L3 forwarding entries sharedby
IPv4/IPv62
1 entry consumed by each IPv4 route
2 entries
consumed by each IPv6 route
Static Route
Max. 512 IPv4 entries
Max. 256
IPv6 entries
IPv4/IPv6 Default Route
PBR (Policy-based Route)
Null
Route
Route Preference
Route Redistribution
Graceful Restart (GR)
Helper
BFD (Bidirectional Forwarding Detection)
IPv4/v6 Static
Route
RIP
VRRP
RIPv1/v2/ng
L3 Mulitcast
IGMP/MLD Filtering
QoS (Quality of Service)
802.1p
8 queues per
port
Queue Handling
Strict Priority (SP)
Weighted Round Robin
(WRR)
Strict + WRR
Weighted Deficit Round Robin (WDRR)
Congestion
Control
Weighted Random Early Detection (WRED)
802.1Qbb Priority-based
Flow Control (PFC) for 10 GbE port
Bandwidth Control
Port-based
(Ingress/Egress, min. granularity 8 Kb/s)
Flow-based (Ingress/Egress, min.
granularity 8 Kb/s)
Per queue bandwidth control (min. granularity 8
Kb/s)
Policy Map
Remark 802.1p priority
Remark IP
precedence/DSCP
Time based QoS
CoS based on:
Switch Port
Inner/
outer 802.1p Priority
Inner/ outer VID
MAC address
Ether Type
IP
address
ToS/IP Preference
DSCP
Protocol Type
TCP/UDP port
IPv6
Traffic Class
IPv6 Flow Label
Three Color Marker
trTCM
srTCM
ACL (Access Control List)
ACL based on:
802.1p priority
VID
MAC
address
EtherType
LLC
VLAN
IP address
IP preference/ToS
DSCP
mask
Protocol type
TCP/UDP port number
IPv6 Traffic Class
IPv6 Flow
Label
Max. ACL entries:
Ingress (hardware entries): 4K
Egress (hardware
entries): 1K
VLAN Access Map Numbers: 3K
Time-based ACL
Green
Energy Effeciency Ethernet (EEE)
Power Saving
By Link Status
Power Saving By Cable Length
Power Saving By LED
Shut-Off
Power Saving By Port Shut-Off
Power Saving By System
Hibernation
Security
Port Security
Supports up to 12K MAC
addresses per port/VLAN/system
Broadcast/Multicast/Unicast Storm
Control
D-Link Safeguard Engine
DHCP Server Screening
Dynamic ARP
Inspection
IP Source Guard
DHCP Snooping
IPv6 Snooping
Dynamic ARP
Inspection (DAI)
DHCPv6 Guard
IPv6 Route Advertisement (RA) Guard
IPv6
ND Inspection
Duplicate Address Detection (DAD)
ARP Spoofing
Prevention
Max. 64 entries
L3 Control Packet Filtering
Unicast Reverse
Path Forwarding (URPF)
Traffic Segmentation
SSL
Supports TLS
1.0/1.1
Supports IPv4/IPv6 access
SSH
Supports SSH v2
Supports
IPv4/IPv6 access
BPDU Attack Prevention
DOS Attack
Prevention
NetBIOS/NetBEUI filtering
AAA
802.1X Authentication
Supports Port/Host-based
access control
Identity-driven Policy Assignment
Dynamic VLAN
Assignment
Bandwidth Control Assignment
ACL Assignment
Web-based Access
Control (WAC)
Supports Port/Host-based access control
Identity-driven
Policy Assignment
Dynamic VLAN Assignment
Bandwidth Control
Assignment
ACL Assignment
Support IPv4/IPv6 access
Support
HTTPS
Compound Authentication
MAC-based Access Control (MAC)
Supports
Port/Host-based access control
Identity-driven Policy Assignment
Dynamic
VLAN Assignment
Bandwidth Control Assignment
ACL Assignment
Guest
VLAN
Microsoft NAP
Support 802.1X NAP
Support DHCP NAP
Privilege
Level for Management Access
RAIDUS and TACACS+
Authentication
Authentication Database Failover
RADIUS/TACACS+
Accounting
OAM (Operations,Administration andMaintenance)
Cable
Diagnostics
802.3ah Ethernet Link OAM
D-Link Unidirectional Link Detection
(DULD)
Dying gasp
802.1ag Connectivity Fault Management (CFM)
Y.1731
OAM
Optical Transceiver Digital Diagnostic Monitoring (DDM)
Management
NTPv3/v4
Precision Time Protocol
(PTP)
Web-based GUI
Support IPv4/IPv6 access
Support SSL
(HTTPS)
Command Line Interface (CLI)
Telnet Server for IPv4/IPv6
access
Telnet Client for IPv4/IPv6
SNMP
Support v1/v2c/v3
Support
IPv4/IPv6 access
SNMP Trap
TFTP Client for IPv4/IPv6
FTP Client for
IPv4/IPv6
IPv4 SFTP Server
RCP
System Log for IPv4/IPv6 Syslog
Server
SMTP
RMONv1
Supports 1,2,3,9 groups
RMONv2
Supports
ProbeConfig group
Command Logging
LLDP/LLDP-MED
D-Link Discover
Protocol (DDP)
DHCP Client option 12
DHCP Auto-configuration
DHCP
Auto-image
DHCP Relay option 60/61/62/18/37/125
DHCP/DHCPv6 Local
Relay
DHCP Server
Support IPv4/IPv6 address assignment
DHCPv6 Prefix
Delegation (PD)
Multiple Images/ Multiple Configurations
DNS Relay for
IPv4/IPv6
DNS Client for IPv4/IPv6
Debug Command
Password Recovery/
Encryption
Ping/ Traceroute for IPv4/IPv6
Microsoft Network Load Balancing
(NLB)
Switch Resource Management (SRM)
sFlow
D-Link License Management
System (DLMS)
Enhanced Image (EI) (includes all SI features plus the following)
VLAN
Super VLAN
L3 Routing
BGP
BGPv4/v4+
4bytes AS
Text/MD5 for
BGPv4
VRF-Lite
IPv4 Static
Route
RIPv1/v2
OSPFv2
BGPv4
Bidirectional Forwarding Detection (BFD)
for OSPF
OSPF
OSPF v2/v3
OSPF passive interface
Stub/NSSA
area
OSPF equal cost route
Text/MD5 for OSPFv2
L3 Mulitcast
IGMPv1/v2/v3
MLDv1/v2
IGMP/MLD
Proxy
DVMRPv3
PIM-DM/SM/SSM/SDM
SSM Mapping for IPv4/IPv6
Multicast
Source Discovery Protocol (MSDP)
MIB/IETF Standards
RFC1065, RFC1066, RFC1155, RFC1156,
RFC2578 MIBStructure
RFC1212 Concise MIB Definitions
RFC1213
MIBII
RFC1215 MIB Traps Convention
RFC1493, RFC4188 Bridge MIB
RFC1157,
RFC2571, RFC2572, RFC2573, RFC2574,RFC2575, RFC2576 SNMP MIB
RFC1442,
RFC1901, RFC1902, RFC1903, RFC1904,RFC1905, RFC1906, RFC1907, RFC1908,
RFC2578,RFC3418, RFC3636 SNMPv2 MIB
RFC271, RFC1757, RFC2819 RMON
MIB
RFC2021 RMONv2 MIB
RFC1398, RFC1643, RFC1650, RFC2358, RFC2665,RFC3635
Ether-like MIB
RFC2668 802.3 MAU MIB
RFC2674, RFC4363 802.1p
MIB
Interface Group MIB
RFC2618 RADIUS Authentication Client
MIB
RFC4022 MIB for TCP
RFC4113 MIB for UDP
RFC2620 RADIUS Accounting
Client MIB
RFC2925 Ping &TRACEROUTE MIB
TFTP uploads and downloads
(D-Link MIB)
Trap MIB (D-Link MIB)
RFC4293 IPv6 MIB
RFC4293 ICMPv6
MIB
Entity MIB
RIPv2 MIB
OSPF MIB
IPv4 Multicast Routing MIB
PIM
MIB for IPv4
IP Forwarding Table MIB
RFC4293 IPv6 SNMP Mgmt Interface
MIB
DDM MIB (D-Link MIB)
Private MIB
MIB for D-Link Zone Defense
DDP
MIB
LLDP-MED MIB
RFC791 IP
RFC768 UDP
RFC793 TCP
RFC792
ICMPv4
RFC2463, RFC4443 ICMPv6
RFC826 ARP
RFC1338, RFC1519
CIDR
RFC2474, RFC3168, RFC3260 Definition of the DS Field inthe IPv4 and IPv6
Headers
RFC1321, RFC2284, RFC2865, RFC2716, RFC1759,RFC3580, RFC3748
Extensible Authentication Protocol(EAP)
RFC2571 SNMP Framework
RFC2572
SNMP Message Processing and Dispatching
RFC2573 SNMP Applications
RFC2574
User-based Security Model for SNMPv3
RFC1981 Path MTU Discovery for
IPv6
RFC2460 IPv6
RFC2461, RFC4861 Neighbor Discovery for IPv6
RFC2462,
RFC4862 IPv6 Stateless Address Autoconfiguration
RFC2464 IPv6 over Ethernet
and definition
RFC2767 Dual Stack Hosts using the
Bump-In-the-StackTechnology
RFC3513, RFC4291 IPv6 Addressing
Architecture
RFC2893, RFC4213 IPv4/IPv6 dual stack function
RFC3484
Default Address Selection for Internet Protocolversion 6