IMG 1 of 0
No Longer Available

Part Number:
82553
(?) Brand:
Manuf No:
Shipping Weight:
50 KG (Includes product packaging)
Estimate Shipping
All stock codes associated to this product
, DASA24UG2421, DAS-A24UG2421
The A24U 4U-profile RAID system is the only high-density choice on the market with sophisticated RAID protection. With reliable SCSI and clustering support, the A24U-G2421 is a cost-effective, large capacity storage solution to incorporate into disk farms, ATM service centers, and imaging stations that require RAID protection at a lower cost per gigabyte.
 
  • Full-featured RAID functionality with two (2) SCSI-320 host channels; transfer rate up to 320MBps each
  • Up to 12TB of storage capacity
  • Accommodates twenty-four (24) SATA II hard drives, backward compatible with SATA I drives
  • Hardware XOR engine by dedicated ASIC266 chipsets
  • Dual-speed cooling modules to reduce system noise
  • Backplane-based, cableless, modular enclosure
Host-to-Drive Interface Model Configuration Form Factor
SCSI-320 to SATA II A24U-G2421 Single controller 4U rackmount

Specifications

RAID

  • Multiple arrays configurable with dedicated or global hot spare drives
  • RAID levels: RAID0, 1 (0+1), 3, 5, 6, 10, 30, 50, 60, and NRAID
  • Online expansion by:
    • Adding new drives
    • Copying and replacing drives with drives of larger capacity
  • Automatic background rebuild
  • Configurable stripe size and write policy per array
  • Intelligent drive handling:
    • In degraded mode: skips irreparable blocks to continue rebuild
    • In normal operation: data-block verification and repair

System Components

  • Single RAID controller configuration provides full-featured RAID functionality
    • One (1) 4U enclosure
    • One (1) RAID controller module
    • One (1) 512MB DDR RAM DIMM module preinstalled on the controller module; system supports 512MB to 2GB capacity DIMM modules
    • Three (3, N+1) hot-swappable, redundant, 405W power supply units
    • Twenty-four (24) hot-swappable drive trays
    • Two (2) hot-swappable, redundant cooling modules
    • Two (2) forearm front handles
    • One (1) optional battery backup unit (BBU)

Host Interface

  • Two (2) SCSI-320 host channels interfaced through two (2) dual-stacked VHDCIs
  • Tagged command queuing up to 256
  • Host-side ordered tag support

Drive Interface

  • Twenty-four (24) hot-swappable 3Gbps SATA II drive trays that accommodate 1-inch pitch SATA II or SATA I disk drives
  • Native Command Queuing (NCQ) support
  • Dedicated bandwidth to each connected drive
  • Automatic bad sector reassignment

Management

  • Firmware-embedded utility via LCD keypad or RS-232C terminal
  • 10/100BaseT Ethernet for out-of-band management
  • Two (2) COM ports for local access to firmware-embedded utility and UPS connectivity
  • Telnet access via onboard Ethernet port
  • Java-based RAIDWatch Manager
    • Graphical user interface
    • Local/remote management; in-band or out-of-band via TCP/IP
    • Centralized management of multiple subsystems from one management computer
    • A variety of event notification methods via the Configuration Client sub-module: email, fax, LAN broadcast, SNMP traps, MSN messenger, ICQ, and SMS short messages
    • Secure link over SSL

Indicators

  • Onboard alarm
  • Module status LED indicators
    • Two (2) per drive tray
    • Two (2) per cooling module
    • One (1) per power supply unit
    • One (1) per BBU module
    • Three (3) per LCD panel
    • Four (4) per RAID controller module
    • Two (2) per Ethernet port
  • Module failure indication and temperature/voltage readings through I2C bus

Physical/Electrical

Interfaces

Four (4) 68-pin VHDCIs in dual-stacked configurations Two (2) COM ports for RS-232C terminal and UPS connection (38400, n, 8, 1) One (1) 10/100BaseT Ethernet port

Power Supply Module

Three (3) redundant, hot-swappable power supplies with PFC
Nominal Power 405W
DC Output +3.3V: min. 0.5A, max. 20A
+5V: min. 2.5A, max. 36A
+12V: min. 1A, max. 24A
+5V SB: min. 0A, max. 0.5A
Input Frequency 47 to 63Hz
AC Input 90VAC @ 8AC , 264VAC @ 4AC with PFC

Cooling Module

Two (2) redundant, dual-fan cooling modules

Environmental Specifications

Humidity 5% to 95% (non condensing ?operating and non-operating)
Temperature Operating : 0 to 40C
Non-operating : - 40 to 60C
Altitude Operating : sea level to 12,000 ft
Non-operating : sea level to 40,000 ft

Dimensions

  • Chassis without handles: 445W x 174.4H x 498D mm (17.6 x 6.86 x 19.6 inches)
  • Chassis with handles 482W x 174.4H x 514D mm (18.97 x 6.86 x 20.2 inches)
  • Package: 590W x 480H x 700D mm

System Weight

  • Net weight: 36.5kg
  • Gross weight: 39.6kg

 

 

No additional files, specification sheets, guides or documentation found for product.

Warranty: 3 years*

Full manufacturers warranty details are available at the manufacturers (Infortrend) web site.

Unless otherwise specified Techbuy is normally your first point of contact for warranty related returns, further information regarding our warranty policies and consumer guarantees is available on our policies and service & support pages.

To apply for return of a product just go to our returns page.

These terms are in addition to and do not affect any terms, conditions, guarantees and warranties implied by law.

Visitor Reviews

[ There are no visitor reviews for this product yet]

Review Product

No related products found.

 
L7: 1 | TM: 1 | LM: 1 | TY: 2 | T: 979
We accept the following with No surcharge on VISA, Mastercard and Paypal!
� Techbuy Pty Ltd 2000 - 2026 All rights reserved.
All prices shown on techbuy.com.au are in $AUD and inclusive of GST. Prices and availability are subject to change without prior notice. Images displayed are accurate to the best of our knowledge and we will not be held responsible for purchases based soley on these images. All brands and names are trademarks of their respective companies. Shipping Australia wide to all metro and regional areas (Sydney, Melbourne, Brisbane, Adelaide, Perth) and Internationally. For more information, please see our usage policies.