IMG 1 of 1
No Longer Available

Part Number:
90824
(?) Brand:
Manuf No:
NP41G
Shipping Weight:
5 KG (Includes product packaging)
Estimate Shipping
All stock codes associated to this product
NP41G

Projector NP61/NP41 Projector NP61/NP41
A portable, compact body with sufficient brightness for large screen presentations in large conference rooms. Light and easy-to-use, the projector is a convenient business tool for use anywhere, anytime.

Functions and Features

Lightweight compact body for easy transport

Lightweight compact body for easy transportThe body weight has been reduced by introducing magnesium housing and employing a new cooling method combining a fan and a small-sized pump which has been developed by NEC. This projector achieves the weight of 1.6 kg with the high brightness 3000 ANSI lumens*, including a built-in speaker that was not available on the previous model.
*: For NP61. Brightness for NP41 is 2300 ANSI lumens.

Top of this page

With the auto focus function, the projector can be set up easily and quickly.

1.Insert the power cord into the outlet.
2.Set the projector in the proper position.
3.Start projecting images by automatically adjusting the focus and correcting any trapezoidal distortion.
With the auto focus function, the projector can be set up easily and quickly. With the auto focus function, the projector can be set up easily and quickly.

projection starts immediately after inserting the power cord into an outlet
Auto power on

By inserting the power cord into an outlet, projection will start immediately without pressing the power button. If the initial input selection is set to Auto, simply by turning on the power, the projector automatically judges the input signal and projects the images.

manual focus adjustment is not required
Auto focus

When turning on the power, adjusting the zoom operation, or removing the main unit, the focus sensor measures the distance between the projector and the screen and adjusts the focus of the projected images automatically. Focus sensor

correcting any trapezoidal distortion in the projected images
Auto Vertical Keystone Correction

If the projector is installed at an angle to project images on a screen, it may result in trapezoidal distortion of the projected images. In this case, the acceleration sensor built into the main unit senses the inclination of the unit in the vertical direction and then corrects for any trapezoidal distortion in the projected images automatically to project square images.
(+/- 40 degrees from the projection angle).
Keystone correction function Keystone correction function

Top of this page

Direct power off function makes it possible to put the projector away very quickly

Direct power off function makes it possible to put the
projector away very quicklyIt is possible to turn off the power of the projector by using the power supply tap with a switch during projecting images or after turning off the main power even if the cooling fan is still operating. Since it is not necessary to wait for the cooling fan to stop, the projector can be promptly put away.

Top of this page

Projecting images with more vivid colours

By employing the colour wheel with six segments (red, green, blue, cyan, white and yellow) and BrilliantColor with superior reproducibility of neutral colours, images of natural scenery can be projected more vividly. Furthermore, variable colour reproduction according to the purposes of use is available by employing Variable Illumination, a technology varying the lamp intensity being irradiated to the respective segments of the colour wheel. NEC provides a setting that emphasizes the colour yellow.Projecting images with more vivid colours

Top of this page

Low noise design

The newly developed small-sized pump suppressing vibration and the low-noise fan have been newly employed in the projector. Furthermore, the number of rotations of the fan can be reduced by employing a new design of the cooling duct optimizing distribution of air flow within the main unit. Thus the projector achieves a drastic reduction in noise, for instance 37 dB in normal mode and 32dB in eco mode.

Employing the built-in monaural speaker

By employing the 0.3W built-in monaural speaker, the projector can provide vivid images as well as sounds at the same time when it is used in a meeting etc.

Top of this page

Other features

  • Wall Colour correction adjusts the colour tones when images are projected on a wall.
  • The lamp life has been extended by introducing the switchable lamp mode.
  • The mouse operation on a PC can be made through the remote controller.
  • Security function prevents unauthorized use

Terminal Panel

Terminal Panel

Top of this page

Throwing Distance and Screen Size

Throwing Distance and Screen Size

Screen Size
(Inch)
Throwing Distance (m) Bottom
Height (cm)
Wide Tele
33 - 1.44 7.0
40
1.45 1.76 8.5
60 2.20 2.66 12.7
80
2.94 3.56 16.9
100
3.69 4.46 21.2
120 4.43 5.36 25.4
150
5.55 6.71 31.8
180 6.67 8.06 38.1
200 7.42 8.96 42.4
240 8.91 10.75 50.8
300 11.14 13.45 63.6
The values in the tables are design values and may vary.

Top of this page

Specifications

Model Name NP61 NP41
DLP chips *1 0.55 inch 1 chip DLP 1024 x 768 pixels
(Aspect Ratio 4:3)
Lens Zoom Manual Zoom (Zoom Ratio 1 to 1.2)
Focus Auto Focus *2 (Effective Range : 1.5m to 5.5m),
Manual Focus F2.2-2.34, f=20.4-24.5mm
Projection Distance 1.5m to 13.4m
Projection Angle 14.7 to 15.0deg (Wide) / 12.3 to 12.6deg (Tele)
Lamp (Eco Mode) 220W (170W) AC 200W (170W) AC
Lamp Life *3 (Eco Mode) 2500H (3500H)
Light Output (Eco Mode) *4
3000 ANSI lumens
(Approx.75% of Normal)
2300 ANSI lumens
(Approx.85% of Normal)
Contrast Ratio (White / Black) *4 1600:1
Quietness (Eco Mode) 37dB (32dB)
Image Size 33inch to 300inch
(Image sizes with less than
40inch are available only in tele mode)
Maximum Resolution UXGA (1600 x 1200) with scaling technology
Synchronization Range Horizontal 15kHz to 100kHz (RGB : 24kHz or over)
Vertical 50 Hz to 120 Hz
(Signals with higher than refresh rate 85 Hz support resolutions of 1024 x 768 or lower.)
Colour Reproduction Full Colour, 16.7Million Colours Simultaneously
Input Terminals Computer
Input
D-Sub Mini 15pin Compatible signals VGA, SVGA, XGA, SXGA, SXGA+, UXGA
RGB 0.7Vp-p/75
H / V Sync TTL Level / 1k or over
Composite Sync TTL Level / 1k or over
Sync on G 1.0Vp-p/75 (with Sync) Negative Polarity
Stereo Mini Stereo L / R 0.5Vrms/22k or over
Component Input D-Sub Mini 15pin
(Sharing with Computer)
Y 1.0Vp-p/75 (With Sync)
Cb Cr (Pb Pr) 0.7Vp-p/75
Compatible signals DTV : 480i, 480p, 720p, 1080i (60Hz) /
576i, 576p, 1080i (50Hz)
DVD : Progressive (50/60Hz)
Audio input is sharing with computer Same with computer
Video Input RCA pin Composite signals NTSC, NTSC4.43, PAL, PAL-60, PAL-N, PAL-M, SECAM
Composite Video 1.0Vp-p/75
Audio input is sharing with computer Same with computer
S-Video Input Mini DIN-4pin Y 1.0Vp-p/75
C 0.286Vp-p/75
Audio input is sharing with computer Same with computer
Control Terminals PC Control Mini DIN-8Pin RS-232C
Built-In Speaker 0.3W Monaural
Keystone Correction Vertical Auto/Manual Approx.Max 40 degrees
Environment Operational Temperatures 5C to 40C
(ECO mode selected automatically at 35C to 40C
/ ECO mode selected automatically at 30C to 40C
when used in HIGH ALTITUDE),
20% to 80% Humidity (Non-condensing)
Storage Temperatures -10C to 50C, 20% to 80% Humidity
(Non-condensing)
Power Requirement 100 to 240V AC, 50 Hz/60 Hz *5
Input Current 3.5-1.4A *6 3.1-1.2A *6
Power Consumption Normal Mode
(Eco Mode / Stand-by [Power saving])
285W (225W / 5W) 265W (225W / 5W)
Regulations For United States UL Approved (UL 60950-1)
Meets FCC Class B requirements
For Canada UL Approved (CSA 60950-1)
Meets DOC Canada Class B requirements
For Australia / New Zealand Meets AS/NZS CISPR.22 Class B
For Europe Meets EMC Directive
(EN55022, EN55024, EN61000-3-2, EN61000-3-3)
Meets Low Voltage Directive
(EN60950-1, TV GS Approved)
Dimensions (W x H x D) 246mm x 72mm x 177mm
(Not Including Protrusions)
Net Weight 1.6kg

No additional files, specification sheets, guides or documentation found for product.

Warranty: 2 Year Return to Base

Full manufacturers warranty details are available at the manufacturers web site.

Unless otherwise specified Techbuy is normally your first point of contact for warranty related returns, further information regarding our warranty policies and consumer guarantees is available on our policies and service & support pages.

To apply for return of a product just go to our returns page.

These terms are in addition to and do not affect any terms, conditions, guarantees and warranties implied by law.

Visitor Reviews

[ There are no visitor reviews for this product yet]

Review Product
Click on a thumbnail to view it below

No related products found.

 
L7: 1 | TM: 0 | LM: 0 | TY: 2 | T: 910
We accept the following with No surcharge on VISA, Mastercard and Paypal!
� Techbuy Pty Ltd 2000 - 2026 All rights reserved.
All prices shown on techbuy.com.au are in $AUD and inclusive of GST. Prices and availability are subject to change without prior notice. Images displayed are accurate to the best of our knowledge and we will not be held responsible for purchases based soley on these images. All brands and names are trademarks of their respective companies. Shipping Australia wide to all metro and regional areas (Sydney, Melbourne, Brisbane, Adelaide, Perth) and Internationally. For more information, please see our usage policies.