All stock codes associated to this product
CA1H200M1WN00, CA-1H2-00M1WN-00
Thermaltake View 28 RGB Gull-Wing Window ATX Mid-Tower Case - No PSU,
Black
The View 28 RGB Mid-Tower Chassis features a transparent gull-wing window,
advanced floating GPU mounting system with an optional PCI-e riser cable, and a
built-in power supply cover for clean cable management. The tinted front panel
with a controllable 256-color RGB LEDs matrix gives users a clean look whilst
adding incredibly stunning visual perspective to the system. The View 28 RGB
supports all high-end PC hardware, graphic cards, and air/liquid cooling
solutions. Build your ultimate PC chassis with the Thermaltake View 28 RGB.
Tt LCS Certified
Tt LCS Certified is a Thermaltake exclusive certification applied to only
products that pass the design and hardcore enthusiasts standards that a true LCS
chassis should be held to. The Tt LCS certification was created so that we at
Thermaltake can designate to all power users which chassis have been tested to
be best compatible with extreme liquid cooling configurations to ensure you get
the best performance from the best features and fitment.
Gull-Wing Window Design
Unlike any other cases on the market, the enlarged window panel with
wraparound design permits you to admire every component in your build either
from the left side or from the top. See the vision of next generation PC chassis
with the View 28 RGB.
Gaze Into Infinity from the RGB Matrix
The View 28 RGB brightens up your system in a brand-new way with its
seemingly endless number of 256-color LEDs the RGB Matrix on the front panel.
Inspired by a spiral galaxy, the RGB Matrix illuminates from the darkness, and
colors your build with vivid lighting effects, including static color
(red/blue/white/green), RGB spectrum and RGB breathing.
RGB Control Mode:
- Mode 1 RGB lighting
- Mode 2~5 Single Color (arrange from red, blue, white, green)
- Mode 6 RGB breath lighting
- Mode 7~10 Single color breathing (arranged from red, blue, white,
green)
- Mode 11 Light off
*Long press on the control button will immediately turn the light off, press
the control button once again to restore it to original states.
Control All Your RGB Lights by One Button
With the integrated RGB LED controller on the front-top panel, all the
lighting effects of Thermaltakes Riing 12 LED RGB fan can fully sync with the
lights of the RGB Matrix. Please refer to the chart below for more details:
Built-in Fan Hub LED Controller Compatibility
List |
|
120mm |
Thermaltake Riing RGB Fan (Hardware controlled) |
* |
Thermaltake Riing RGB Fan TT Premium Edition (Software
controlled) |
N/A |
Thermaltake Riing Plus RGB Fan TT Premium Edition (Software
controlled) |
N/A |
Tool-Free Installation
The innovative 3.5 & 2.5 tool-free drive bay design minimizes the hassles
of installation and removal, whilst allowing users to freely interchange the
hard-drive cages to suit their particular needs. The dual drive bay concept of
2+4 offers a good ratio for accessories and storage devices.
Riser GPU Support Design
Specially designed with dual GPU placement, the View 28 RGB has the support
for vertical graphic card layout with dual PCI-E slots design and optional PCI-e
riser cable.
Thermaltake PCI-e X16 Riser Cable (Optional) Support a wide range of GPU
solutions.
Outstanding Expandability with a Clean Look
The View 28 RGB supports motherboards up to standard ATX, a dual expansion
slot GPU of up to 410mm in length without front fan, and has the ability to
accommodate multiple 3.5/2.5 storage devices. Besides, the View 28 RGB features
its advanced cable management with a built-in power cover that allows the entire
bottom area to be used to reorganize unused cables.
Superior Ventilation and Liquid Cooling Capable
The View 28 RGB delivers a superior cooling performance for DIY/AIO liquid
cooling and air cooling systems. Users can install up to a 360mm radiator at the
front and a 120mm radiator at the rear. The View 28 RGB also supports a tower
CPU cooler with maximum height 155mm, and comes with a preinstalled 120mm
exhaust fan to optimize system ventilation.
View 28 RGB Radiator Supporting
List
Radiator Compatibility
List (Thickness up to 30mm without
fan) |
|
120mm |
240mm |
360mm |
Front |
* |
* |
* |
Top |
|
|
|
Rear |
* |
|
| |
All-in-One Compatibility
List (Water 3.0 Series) |
|
120mm (Performer) |
240mm (Extreme) |
360mm (Ultimate) |
Front |
* |
* |
* |
Top |
|
|
|
Rear |
* |
|
| |
View 28 RGB Fan Supporting
List
Fan Compatibility List |
|
120mm |
Front |
3 |
Top |
|
Rear |
1 | |
Thermaltake Compatible
Fan |
|
120mm |
Pure Fan Series |
* |
Luna Fan Series |
* |
Riing Fan Series |
* | |
Specifications
P/N |
CA-1H2-00M1WN-00 |
Case Type |
Mid Tower |
Dimension (H x W x D) |
505 x 200 x 493mm |
|
(19.9 x 7.9 x 19.4 inch) |
Net Weight |
6.7 kg / 14.9 lb |
Side Panel |
Transparent Window |
Color |
Exterior & Interior : Black |
Material |
SPCC |
Cooling System |
|
Rear (exhaust) |
120 x 120 x 25 mm fan |
|
(1000rpm, 16dBA) |
Drive Bays |
|
Accessible |
2 x 3.5 or 2.5(with HDD tray) |
Hidden |
4 x 2.5 (with the M/B tray) |
Expansion Slots |
8 + 2 |
Motherboards |
6.7 x 6.7 (Mini ITX),9.6 x 9.6 (Micro ATX),12 x 9.6
(ATX) |
I/O Port |
USB 3.0 x 2,USB 2.0 x 1, HD Audio x 1 |
PSU |
Standard PS2 PSU (optional) |
Fan Support |
|
Front |
3 x 120mm |
Rear |
1 x 120mm |
Power Cover |
1 x 120mm |
Radiator Support |
|
Front |
1x360mm |
Rear |
1x120mm |
Clearance |
|
CPU cooler height limitation |
155mm |
VGA length limitation |
410mm(Without Front Fan) |
|
Suggested VGA thickness up to 40mm(2-slot reference card standard) with
7mm space for ventilation if extending for VGA
card |
PSU length limitation |
180mm |
|
LED Controller Supports Up To 8 Thermaltake Riing RGB Fans(Hardware
Edition) |