All stock codes associated to this product
VE814ARATU, VE814AR-AT-U, KVAVE814AR, KVA-VE814AR, 4719264646065
Aten VE814AR HDMI HDBaseT Receiver with Dual Output (4K@100m)
(HDBaseT Class A)
Overview
- Extends HDMI signals to one local and two remote displays up to 100 m over
a single Cat 5e/6/6a or ATEN 2L-2910 Cat 6 cable
- HDMI (3D, Deep Color, 4K); HDCP 2.2 compatible
- Superior video quality:
- 4K up to 100 m
- 1080p up to 150 m when in HDBaseT Long Reach Mode
- Supports two IR channels for simultaneous IR signal transmissions, ranged
from 30 KHz to 56 KHz
ATEN VE814AR is an HDBaseT Video Receiver that is capable of receiving HDMI
signals up to 100 m over a single Cat 5e/6/6a or ATEN 2L-2910 Cat 6 cable.This
HDCP 2.2-compliant receiver meets the HDMI Specification, including 3D, Deep
Color, the maximum data rate of (10.2 Gbps), and 4K video quality up to 100
m.
The VE814AR supports RS-232 and IR signaling pass-through, allowing you to
control the HDMI source device from the remote unit (VE814AR) while granting
access to the HDMI display device from the local unit (VE8014AT). In addition,
it supports Long Reach Mode that extends HDMI signals up to 150 m, 1080p, via a
single Cat 5e/6 cable.
The VE814AR is a powerful solution for where digital signage is required,
such as bars, educational spaces, and public transportation stations, allowing
display of identical contents at different spots.
Package Contents
- 1x VE814AR Receiver
- 1x RS-232 Terminal Block
- 1x Power Adapter
- 1x User Instructions
Features
- Superior video quality:
- 4K up to 100 m
- 1080p up to 150 m when in HDBaseT Long Reach Mode
- Extends Ethernet communication using the Ethernet pass-through port
- Supports two IR channels for simultaneous IR signal transmissions, ranged
from 30 KHz to 56 KHz
- ATEN EDID Technology -- when both transmitter and receiver sides are
connected, VE814A adopts the EDID values of the display connected to the
VE814AT for high-quality output
- RS-232 channel – allows you to connect to serial terminals or serial
devices, such as touch screens and barcode scanners
- Supports wide screen format
- Built-in 8 kV/15 kV ESD protection
- Plug-and-play
- Rack-mountable
Diagram
Specifications
|
Video
Output |
|
Interfaces |
2 x HDMI Type A Female
(Black) |
|
Impedance |
100
|
|
Video |
|
Max.
Data Rate |
10.2Gbps (3.4Gbps per
lane) |
|
Max.
Pixel Clock |
340
MHz |
|
Compliance |
HDMI (3D, Deep Color,
4K) |
|
HDCP
Compatible |
|
Consumer Electronics
Control (CEC) |
|
Max.
Resolutions / Distance |
Up to 4K@70m (Cat 5e/6)
/ 100m (Cat 6a/ATEN 2L-2910 Cat6); 1080p@100m (Cat
5e/6/6a) |
|
*4K
supported: |
|
4096 x 2160 / 3840 x
2160 @ 60Hz (4:2:0); |
|
4096 x 2160 / 3840 x
2160 @ 30Hz (4:4:4) |
|
Audio |
|
Output |
2 x HDMI Type A Female
(Black) |
|
Connectors |
|
Unit
To Unit |
1 x RJ-45
Female |
|
Power |
1 x DC Jack (Black)
with locking |
|
Control |
|
RS-232 |
Connector: 1 x Terminal
Block, 3 pole |
|
Baud Rate: 19200, Data
Bits:8, |
|
Stop Bits:1, no parity
and flow control |
|
IR |
2 x Mini Stereo Jack
Female (Black) |
|
Ethernet |
1 x RJ-45
Female |
|
Switches |
|
Long
Reach Mode Switch |
1 x Slide Switch -
ON/OFF |
|
Firmware
Upgrade |
1 x Slide Switch -
ON/OFF |
|
Power
Consumption |
DC5V:7.87W:37BTU |
|
Environmental |
|
Operating
Temperature |
0 -
40C |
|
Storage
Temperature |
-20 -
60C |
|
Humidity |
0 - 80% RH,
Non-Condensing |
|
Physical
Properties |
|
Housing |
Metal |
|
Weight |
0.47 kg ( 1.04 lb
) |
|
Dimensions
(L x W x H) with bracket |
14.02 x 12.30 x 3.00
cm |
|
(5.52 x 4.84 x 1.18
in.) |
|
Dimensions
(L x W x H) without bracket |
13.60 x 10.10 x 2.90
cm |
|
(5.35 x 3.98 x 1.14
in.) |
|
Note |
For some of rack mount
products, please note that the standard physical dimensions of WxDxH are
expressed using a LxWxH format. |
