All stock codes associated to this product
CA1N200M6WN00, CA-1N2-00M6WN-00
Thermaltake CA-1N2-00M6WN-00 Commander C31 TG Snow ARGB Edition -
White
Overview
Mid-tower case with tempered glass side panel and two preinstalled 200mm 5V
ARGB LED front fans and one 120mm standard rear fan, supporting up to ATX
MB.
Design
- Two Built-in 200mm 5V ARGB Front Fans
- Excellent Cooling Capability with 2-Way Radiator Mounting up to
360mm
- Built-in ARGB Switch Board for Different Lighting Modes
- Gaming Design, Mesh Front Panel
- Riser GPU Support Bracket
- Built-in Power Cover
- 4mm Tempered Glass Side Panel
- Superior Hardware Support
- Supports both ARGB Color Synchronization with ASUS, MSI, GIGABYTE, and
ASRock Motherboards, and a RGB color selection button via the I/O
Port
- I/O Port Supports Dual USB 3.0
Dual Built-in 200mm 5V ARGB Case Fans
Preinstalled with two 200mm 5V ARGB front fans featuring hydraulic bearing, 9
addressable LEDs and 16.8 million-color illumination to guarantee high airflow
and custom system designs to show off your PC design
skills.
One Click, Switching The Mode
The 5V ARGB fans can be controlled using a simple interface built into the
I/O panel that cycles through 7 different lighting modes and a range of
different color options.
- Wave Mode [Mode 1] RGB wave flows across the entire fan. Color mode cannot
be changed while on wave mode.
- Long press on RGB button for 3 seconds, fans will blink twice which now
are controlled by MB software, and vice versa.
Tt LCS Certified
Tt LCS Certified is a Thermaltake exclusive certification applied to only
products that pass the design and hardcore enthusiasts standards that a true LCS
chassis should be held to. The Tt LCS certification was created so that we at
Thermaltake can designate to all power users which chassis have been tested to
be best compatible with extreme liquid cooling configurations to ensure you get
the best performance from the best features and fitment.
Sync with Motherboard RGB Software
Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic
Light Sync and ASRock Polychrome. It supports motherboards that have a 5V
addressable RGB header, allowing you to control the lights directly from the
above-mentioned software without installing any extra lighting software or
controllers. For more details, please visit ASUS, GIGABYTE, MSI and ASRock
official websites.
Aura Addressable Header
Digital Pin Header
JRAINBOW Header
Addressable RGB LED Header
Angular, Mesh Front Panel
Expanded from the gaming spirit of the classic Commander MS-I chassis, the
uniquely design full mesh panel optimized airflow. With its modern design and
high performance, it is the best choice for both gamers and
enthusiasts.
Riser GPU Support Bracket
Specially designed for dual GPU placement options, Commander C Series has the
support for vertical graphic card layout with dual PCI-E slots design.
Integrated riser GPU support bracket not only prevents the graphic card from
sagging, but also helps to reduce the weight on the motherboard PCI-E
slots.
Built-in PSU Cover
Equipped with a PSU cover with a ventilated design to improve airflow and
hide those unsightly cables.
Seamless Tempered Glass Panel
The tempered glass side panel of the Commander C31 TG Snow ARGB is built to
be more durable and scratch resistant than older acrylic panels.
Superior Hardware Support
The Commander C31 TG Snow ARGB has outstanding expandability with support for
a tower CPU cooler with maximum height 180mm, a dual expansion slot VGA of up to
310mm in length with reservoir, and a power supply with length of up to
200mm.
Excellent Cooling Capability
Optimized for excellent cooling capability with two 200mm 5V ARGB front fans
and one 120mm standard rear fan. The case is able to house up to two 200mm, two
140mm or three 120mm front fans, up to two 140mm fans on top to allow users
build a complete high-end system.
Handy I/O Ports
Dual 3.0 USB ports on top-front panel to grant direct access when needed. As
well as an ARGB button for controlling 7 lighting modes of ARGB
fans.
Radiator Support List
Radiator Compatibility List
|
120mm |
240mm |
360mm |
140mm |
280mm |
420mm |
Front |
. |
. |
. |
. |
. |
- |
Top |
. |
. |
- |
. |
. |
- |
Rear |
. |
- |
- |
- |
- |
- |
All-in-One Compatibility List (Water 3.0 and Floe
series)
|
Perform |
Pro |
240 Series |
360 Series |
140 Series |
280 Series |
Front |
. |
. |
. |
. |
. |
. |
Top |
. |
. |
. |
- |
. |
. |
Rear |
. |
. |
- |
- |
- |
- |
Fan Support List
Fan Compatibility List
|
120mm |
140mm |
200mm |
Front |
3 |
2 |
2 |
Top |
2 |
2 |
- |
Rear |
1 |
- |
- |
Thermaltake Compatible Fan
|
120mm |
140mm |
200mm |
PURE FAN Series |
|
|
|
LUNA FAN Series |
|
|
|
Riing FAN Series |
|
|
|
Specifications
P/N |
CA-1N2-00M6WN-00 |
SERIES |
Commander |
MODEL |
Commander C31 TG Snow
ARGB |
CASE
TYPE |
Middle
tower |
DIMENSION (H X W X
D) |
462 x 233 x 507
mm |
(18.2 x 9.2 x 20
inch) |
NET
WEIGHT |
8.01 kg / 17.66
lb |
SIDE
PANEL |
4mm Tempered Glass
x1 |
COLOR |
Exterior & Interior
: Black |
MATERIAL |
SPCC |
COOLING
SYSTEM |
Rear (exhaust)
: |
120 x 120 x 25 mm
fan |
(1000rpm, 16
dBA) |
Front (intake)
: |
200 x 200 x 30 mm ARGB
fan x2 |
(800rpm, 29.2
dBA) |
DRIVE
BAYS |
|
-ACCESSIBLE |
- |
-HIDDEN |
3 x 3.5 or 2.5 (HDD
Bracket); 2 x 2.5 (HDD Bracket) |
EXPANSION
SLOTS |
7+2 |
MOTHERBOARDS |
6.7 x 6.7 (Mini ITX),
9.6 x 9.6 (Micro ATX), 12 x 9.6 (ATX) |
I/O
PORT |
USB 3.0 x 2, HD Audio x
1, RGB Switch x 1 |
PSU |
Standard PS2 PSU
(optional) |
FAN
SUPPORT |
Front: |
3 x 120mm, 2 x 140mm, 2
x 200mm |
Top: |
2 x 120mm, 2 x
140mm |
Rear: |
1 x 120mm, 1 x
140mm |
RADIATOR
SUPPORT |
Front: 1 x 360mm, 1 x
280mm |
Top: 1 x 240mm, 1 x
280mm |
Rear: 1 x
120mm |
CLEARANCE |
CPU cooler height
limitation: 180mm |
PSU length limitation:
200mm |
VGA length limitation:
310mm(With reservoir) 410mm(Without reservoir) |
VGA width
limitation(Vertically): 45mm |
VGA height limitation:
110mm |
RAM height limitation:
35mm (With 140mm radiator series) 50mm (With 120mm radiator
series) |