Easily Hot Swappable
|
 |
|
|
Designed for applications
where regular drive swap may be required, the MB508SP-B EZ slide mini
drive trays are hot-swappable, to allow for drives to be added and
replaced easily, without restarting the whole machine. Hot-swap allows
failed drives to be replaced in seconds, without any costly downtime to
the rest of the system. To ensure a long life, the internal SAS/SATA
connectors are rated to support up to 10,000 swapping cycles in each
bay.
|
|
|
Highly Compatible EZ Slide Tray System
|
 |
|
The EZ slide mini tray system
supports full-height 2.5 mechanical hard drives and solid state drives,
including high capacity SATA and SAS drives. SAS drives are used in
enterprise applications such as long-term archival for their long
lifespan, higher reliability, and faster rotational speeds up to 15,000
RPM for fast data access. All SAS drives are supported, including
Seagate Exos, HGST Ultrastar C series, and Dell, HPE, and Toshiba SAS
drives.
|
 |
|
ToughArmor series trays are
designed for maximum interoperability; the trays on MB508SP-B can be
used with many other ToughArmor models, including the MB991 series and
the MB994 series. This means drives can easily be transported and used
in other systems, without having to reattach drives to another tray.
|
 |
|
For drive security, the eagle-hook lock system on the tray makes sure your hard drives will not eject when not needed.
|
|
|
Next Generation Connection Standard
|
|
 |
|
|
Two Mini-SAS HD (SFF-8643)
ports connect all 8 drives, vastly reducing cable clutter and adding
compatibility for a larger selection of RAID controller cards. Compared
to SATA, Mini-SAS HD can travel further without signal degradation,
keeping your data transfers clear from the static noise that can result
in data loss.
|
|
|
|
|
Powerful Cooling
|
 |
|
|
Featuring a large, powerful
80mm fan with high, low, and off settings that is designed to remove as
much heat as possible from your drives rapidly. The fan works together
with ventilation holes amply placed throughout the enclosure, ensuring
drives run only at their optimal temperatures.
|
|
 |
|
|
For further expandability, the
stock fan can be easily replaced with any aftermarket 80mm cooling fan,
giving you a choice of your preferred fan for improved cooling
performance or quieter operation.
|
|
|
|
Packed with Features
|
 |
|
Each of MB508SP-Bs drive bays
has its own LED indicator light to notify you of any drive activity,
preventing drive damage by alerting you when your drive is in use.
|
|
 |
|
Never lose track of which
drives go where. Individual numbered drive ID labels let you maintain
the order of your drives in RAID arrays. The drive labels can be easily
rearranged or removed entirely for a cleaner look.
|
|
 |
|
Supports Mini-SAS HD data and
SATA power cables with locking latch designs, ensuring that once
installed, your cables will never slip out of place and cause data loss
from accidental drive ejection.
|
|
|
|
Make ToughArmor On-The-GO!
With MB991U3-1SB
|
To access your data outside of your system or in a remote location, the ToughArmor MB991U3-1SB
is the way to go about. The drive tray slot of MB991U3-1SB is
compatible with a variety of ToughArmor drive trays including the
ToughArmor MB516, MB607, MB991, MB992, MB994, MB996 and MB998 series.
This allows existing ToughArmor users to access their internal drive
externally without opening up the case. It is a great tool for an
individual drive diagnostic test. If you need to do a safe data erase or
just simply expending system storage capacity, just remove the tray
from the internal ToughArmor unit and insert it in the MB991U3-1SB to
perform individual tasks externally with USB 3.0 interface. Best of all,
the MB991U3-1SB uses USB bus-powered and it does not require a power
adapter to operate. Simply connect the USB cable to any system and you
are ready to go.
|
|
|
|
|
|
Drive Tray
|
|
 |
|
EZ-Slide Mini Tray MB991TRAY-B DriveTray for ToughArmor MB991/994/508 series | | | |
