SERVEREDGE CAT6A Shielded Gel-filled Network Cable combines the advantages of shielding and gel filling. It offers exceptional protection against electromagnetic interference and crosstalk, along with environmental factors, ensuring reliable performance in harsh outdoor conditions. The gel filling further enhances resistance to moisture and water, combined with UV protection against prolonged exposure to sunlight, extending the cables lifespan. With high data rates support and improved signal integrity, it's an ideal choice for long-distance installations, offering secure and future-proofed networking capabilities with minimal maintenance needs.
Its packaged on a wooden reel with sequential measurement markings on the jacket. The cable is made from the highest quality copper to maximize performance and minimize Near-End Crosstalk (NEXT).
PRODUCT SPECIFICATIONPRODUCT SPECIFICATION
1. Conductor: 0.5700.02mm
Material: Soft annealed bare copper wire
2. Insulation: PE-Foam/Skin-PE
Nominal Wall: 0.24mm
Diameter 1.060.1mm
3. Filler: Gel Filled
4. Inner Jacket Material: PE
Ripcord: Under Sheath
Nominal Wall Thickness: 0.45mm
5. Outer Shield Material: Aluminium Foli-Polyester Tape
Drain Wire Material: Solid Tinned Copper
6. Diameter 0.400.1mm
7. Outer Jacket Material: PE
Nominal Wall Thickness:
Outer Diameter: 0.45mm 8.50.80mm
ELECTRICAL CHARACTERISTICS
Conductor resistance at 20C 93.8 /km
Unbalance conductor DC resistance 5%
Mutual capacitance 58nF/km
Pair to ground capacitance unbalance 330pF/100m Insulation resistance 5000MKm(DC500V Charge 1 minute)
MECHANICAL CHARACTERISTICS
Storage Temperature range-15C to 75C
Installation Temperature range 0C to 60C
Maximum Pulling Force 25lbs
Min bend radius (install) 120mm
PRODUCT FEATURE Sequential measurement markings on jacket
Packaged on a wooden reel
Supports all applications designed to operate over Category 6A or lower rated systems
Suitable for direct underground burial
Jell filled to protect from moisture
UV Stabilised
25 Year Warranty*
