All stock codes associated to this product
NHUUAG3PROB, NHU-UA-G3-PRO-B, UAG3ProB, UA-G3-Pro-B, 810084697580
G3 Reader Pro (Black)
Third-generation, indoor/outdoor NFC reader and intercom with Touch Pass support.
Apple Wallet & Google Wallet Touch Pass Support
NFC Card & Keyfob Access
UniFi Identity Mobile Access
PIN Access
Outdoor-Ready
PoE via UniFi Control Hub
Advanced Access Control
The G3 Reader Pro combines a high-performance NFC reader with a built-in intercom system, enabling secure access and seamless communication at entry points. Its integrated camera and two-way audio facilitate real-time visitor interaction, enhancing security and convenience.
Versatile Authentication Methods
Supporting multiple authentication methods, including NFC cards, PIN codes, and mobile credentials via Apple and Google Wallet, the G3 Reader Pro offers flexibility to meet diverse security requirements.
Durable Design
Built with a polycarbonate and glass enclosure and IP55 rated, the G3 Reader Pro is suitable for both indoor and outdoor installations.
Seamless Integration
The G3 Reader Pro integrates effortlessly with the UniFi Access ecosystem, allowing centralised management of users, schedules, and access policies through the UniFi Access Controller.
Customisable Interface with Interface Designer
With UniFi Access 3.2 (coming to Early Access April 18), Ubiquiti are bringing true customisation to the forefront. The new Interface Designer empowers you to build visual, branded experiences directly onto Access Reader Pro and Intercom units.
2-Person Authentication
As UniFi Access expands into more secure environments, Ubiquiti are introducing 2nd-person and multi factor authentication. An extra layer of control for mission-critical facilities. Now, two authorised users must authenticate to unlock a door, reinforcing compliance and safety protocols.
Overview
Dimensions
160 x 40.4 x 40.55 mm (6.3 x 1.59 x 1.6")
NFC Card & Keyfob Access
Yes
Two-Way Intercom & Doorbell Access
Yes
UL 294 Level
Destructive attack: Level I
Line security: Level I
Endurance: Level I
Standby power: Level I
Mechanical
Enclosure Material
Polycarbonate, glass
Mount Material
Aluminium alloy
Mounting
Wall, gang-box mount (Included)
Angle mount, junction box (Optional)
Hardware
Indoor and Outdoor Use
Yes
Ambient Operating Temperature
Device: -30 to 45 C (-22 to 113 F)
Display: -10 to 45 C (14 to 113 F)
Ambient Operating Humidity
5 to 90% noncondensing
Networking Interface
(1) GbE RJ45 port
Power Method
PoE
UL 294 Power-limited Class 2 PSU
UL 60950-1/62368-1 LPS/PS2 PSU
Supported Voltage Range
48V DC
ESD/EMP Protection
Air: 15kV, contact: 8kV
Display
120 mm (4.7") diagonal
Touch Screen Technology
Capacitive touch
Display Luminance
480 nits (Typical)
Screen Orientation
Portrait
NFC Read Range
< 30 mm (1.18")
NFC Technology
ISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340)
MIFARE Classic / MIFARE DESFIRE
Sony FeliCa (ID only)
NFC Forum tags T1T, T2T, T3T, T4T and T5T
ECP 2.0
PoE Cabling Requirements
Cat 5e cabling is the minimum performance category recommended. The performance category utilised should match the transmission speed required at the installation site.
The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm ) for patch cords; 24 AWG (0.21 mm ) for horizontal or riser cable.
UL 294 Statement
Compliance with IEEE 802.3 specifications was not verified as part of UL 294.
The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
CAN/ULC-60839-11-1 Grade
Grade assignment: I
Certifications
CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Document Number
UA-G3-Pro-B, V01
Software
Management Application
Access
Software Information
The software version can be checked at https://unifi.ui.com
