All stock codes associated to this product
810084693230, NHUUAG3FLEXB, NHU-UA-G3-FLEX-B, UAG3FlexB, UA-G3-Flex-B
Reader Flex (Black)
Third-generation NFC card reader with a keypad and Touch Pass support.

Apple Wallet & Google Wallet Touch Pass Support

PIN Access

NFC Card & Keyfob Access

UniFi Identity Mobile Access

Outdoor-Ready

PoE via UniFi Control Hub
Third-Generation Access Readers
Durable and elegant access control readers that deliver a magical user experience with versatile access methods.

NFC and Mobile Credential Support
Supports a wide range of NFC cards and mobile credentials, including MIFARE 13.56 MHz cards. This ensures secure, fast, and flexible user authentication.

Compact and Versatile Access Reader
The UniFi Access Reader Flex offers a slim, modern profile ideal for indoor and covered outdoor installations.
Overview
Dimensions
84 x 84 x 40.8 mm
(3.3 x 3.3 x 1.6")
NFC Card & Keyfob Access
Yes
UL 294 Level
Destructive attack: Level I
Line security: Level I
Endurance: Level I
Standby power: Level I
Mechanical
Enclosure Material
Polycarbonate, glass, aluminium alloy
Mount Material
Polycarbonate, aluminium alloy
Mounting
Wall (Included)
Gang-box, junction box (Optional)
Hardware
Indoor and Outdoor Use
Yes
Ambient Operating Temperature
-30 to 60 C
(-22 to 140 F)
Ambient Operating Humidity
5 to 90% noncondensing
Networking Interface
(1) 10/100 MbE RJ45 port
Power Method
PoE
UL 294 Power-limited Class 2 PSU
UL 60950-1/62368-1 LPS/PS2 PSU
Supported Voltage Range
4457V DC
ESD/EMP Protection
Air: 15kV, contact: 8kV
Sensors
(12) Capacitive buttons
NFC Read Range
< 30 mm (1.18'')
NFC Technology
ISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340)
MIFARE Classic / MIFARE DESFIRE
Sony FeliCa (ID only)
NFC Forum tags T1T, T2T, T3T, T4T and T5T
ECP 2.0
PoE Cabling Requirements
Cat 5e cabling is the minimum performance category recommended. The performance category utilised should match the transmission speed required at the installation site.
The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm ) for patch cords; 24 AWG (0.21 mm ) for horizontal or riser cable.
UL 294 Statement
Compliance with IEEE 802.3 specifications was not verified as part of UL 294.
The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
CAN/ULC-60839-11-1 Grade
Grade assignment: I
Certifications
CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Document number, and issue date and/or revision level
UA-G3-Flex V01
Software
Management Application
Access
Software Information
The software version can be checked at https://unifi.ui.com