| Part No: 457306 Manufacturer No. C6-04-Blue Available $9.00 ALOGIC Cat6 snagless patch cables are ideal to handle ultra-high speed and multi-gigabit protocols to transfer large volumes of voice, data, video and communications signals. ALOGIC CAT6 cables can help to improve the networks speeds by reducing impedance loss and network return loss in your network by as much as 4 %. The cables consist of 4 pairs of 24 AWG insulated copper conductors separated by a cross to maintain a uniform distance between them which leads to improved cross talk performance, low insertion loss and higher data rates. Gold plated connectors ensure crystal clear transmission and the custom designed snagless boot protects the cable from any damage during installation.ALOGIC CAT6 snagless patch cables come in 1 different colours and a range of lengths from .3 m to 5 m, which lets you colour code your installation. PRODUCT SPECIFICATIONVendor | ALOGIC | Wiring Scheme: | T568A | Standard: | Category 6 TIA/EIA-568-B-2.1, draft 9 | Connector | 50 micron gold-plated RJ45 | Temperature Rating: | 60C | Voltage Rating : | 30V | Approvals | RoHS Compliant | Warranty | Lifetime | Package Type | Polybag | Jacket | PVC | Connector Type | 8P8C (RJ45) | Conductor Type | 24AWG (7/0.20), Stranded Bare Copper |
PRODUCT FEATURE* All ALOGIC CAT6 cables are A-Tick compliant with ACMA requirements. * Supports 1 Base-T, 1 Base-T, and 1 Base-T Network * Constructed from high quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. * Available in 1 colours to easily colour-code your network installation. * Meets and exceeds all Cat6 TIA/EIA-568-B-2.1, draft 9 standards * 5 -micron gold-plated connectors to ensure clear transmissions * Snagless moulded connectors to protect the RJ45 retaining clips from damage during installation.
|
|
|
|
|
| Part No: 457341 Manufacturer No. C6-2.5-Green Available $7.50 ALOGIC Cat6 snagless patch cables are ideal to handle ultra-high speed and multi-gigabit protocols to transfer large volumes of voice, data, video and communications signals. ALOGIC CAT6 cables can help to improve the networks speeds by reducing impedance loss and network return loss in your network by as much as 4 %. The cables consist of 4 pairs of 24 AWG insulated copper conductors separated by a cross to maintain a uniform distance between them which leads to improved cross talk performance, low insertion loss and higher data rates. Gold plated connectors ensure crystal clear transmission and the custom designed snagless boot protects the cable from any damage during installation.ALOGIC CAT6 snagless patch cables come in 1 different colours and a range of lengths from .3 m to 5 m, which lets you colour code your installation. PRODUCT SPECIFICATIONVendor | ALOGIC | Wiring Scheme: | T568A | Standard: | Category 6 TIA/EIA-568-B-2.1, draft 9 | Connector | 50 micron gold-plated RJ45 | Temperature Rating: | 60C | Voltage Rating : | 30V | Approvals | RoHS Compliant | Warranty | Lifetime | Package Type | Polybag | Jacket | PVC | Connector Type | 8P8C (RJ45) | Conductor Type | 24AWG (7/0.20), Stranded Bare Copper |
PRODUCT FEATURE* All ALOGIC CAT6 cables are A-Tick compliant with ACMA requirements. * Supports 1 Base-T, 1 Base-T, and 1 Base-T Network * Constructed from high quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. * Available in 1 colours to easily colour-code your network installation. * Meets and exceeds all Cat6 TIA/EIA-568-B-2.1, draft 9 standards * 5 -micron gold-plated connectors to ensure clear transmissions * Snagless moulded connectors to protect the RJ45 retaining clips from damage during installation.
|
|
|
|
|
| Part No: 457342 Manufacturer No. C6-2.5-Grey Available $7.45 ALOGIC Cat6 snagless patch cables are ideal to handle ultra-high speed and multi-gigabit protocols to transfer large volumes of voice, data, video and communications signals. ALOGIC CAT6 cables can help to improve the networks speeds by reducing impedance loss and network return loss in your network by as much as 4 %. The cables consist of 4 pairs of 24 AWG insulated copper conductors separated by a cross to maintain a uniform distance between them which leads to improved cross talk performance, low insertion loss and higher data rates. Gold plated connectors ensure crystal clear transmission and the custom designed snagless boot protects the cable from any damage during installation.ALOGIC CAT6 snagless patch cables come in 1 different colours and a range of lengths from .3 m to 5 m, which lets you colour code your installation. PRODUCT SPECIFICATIONVendor | ALOGIC | Wiring Scheme: | T568A | Standard: | Category 6 TIA/EIA-568-B-2.1, draft 9 | Connector | 50 micron gold-plated RJ45 | Temperature Rating: | 60C | Voltage Rating : | 30V | Approvals | RoHS Compliant | Warranty | Lifetime | Package Type | Polybag | Jacket | PVC | Connector Type | 8P8C (RJ45) | Conductor Type | 24AWG (7/0.20), Stranded Bare Copper |
PRODUCT FEATURE* All ALOGIC CAT6 cables are A-Tick compliant with ACMA requirements. * Supports 1 Base-T, 1 Base-T, and 1 Base-T Network * Constructed from high quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. * Available in 1 colours to easily colour-code your network installation. * Meets and exceeds all Cat6 TIA/EIA-568-B-2.1, draft 9 standards * 5 -micron gold-plated connectors to ensure clear transmissions * Snagless moulded connectors to protect the RJ45 retaining clips from damage during installation.
|
|
|
|
|
| Part No: 457343 Manufacturer No. C6-2.5-White Available $7.45 ALOGIC Cat6 snagless patch cables are ideal to handle ultra-high speed and multi-gigabit protocols to transfer large volumes of voice, data, video and communications signals. ALOGIC CAT6 cables can help to improve the networks speeds by reducing impedance loss and network return loss in your network by as much as 4 %. The cables consist of 4 pairs of 24 AWG insulated copper conductors separated by a cross to maintain a uniform distance between them which leads to improved cross talk performance, low insertion loss and higher data rates. Gold plated connectors ensure crystal clear transmission and the custom designed snagless boot protects the cable from any damage during installation.ALOGIC CAT6 snagless patch cables come in 1 different colours and a range of lengths from .3 m to 5 m, which lets you colour code your installation. PRODUCT SPECIFICATIONVendor | ALOGIC | Wiring Scheme: | T568A | Standard: | Category 6 TIA/EIA-568-B-2.1, draft 9 | Connector | 50 micron gold-plated RJ45 | Temperature Rating: | 60C | Voltage Rating : | 30V | Approvals | RoHS Compliant | Warranty | Lifetime | Package Type | Polybag | Jacket | PVC | Connector Type | 8P8C (RJ45) | Conductor Type | 24AWG (7/0.20), Stranded Bare Copper |
PRODUCT FEATURE* All ALOGIC CAT6 cables are A-Tick compliant with ACMA requirements. * Supports 1 Base-T, 1 Base-T, and 1 Base-T Network * Constructed from high quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. * Available in 1 colours to easily colour-code your network installation. * Meets and exceeds all Cat6 TIA/EIA-568-B-2.1, draft 9 standards * 5 -micron gold-plated connectors to ensure clear transmissions * Snagless moulded connectors to protect the RJ45 retaining clips from damage during installation.
|
|
|
|
|
| Part No: 457370 Manufacturer No. DP-HDMI-ADPC Available $15.40 This ELEMENTS range of ALOGIC adapters provides an easy and effective way to convert a DisplayPort signal from a computer for viewing on a display with a HDMI input. The ALOGIC Elements range of products are designed for affordability and value for m
|
| Part No: 457624 Manufacturer No. LCLC-20-OM4 Available $54.10 The Multi Mode OM4 cables are designed to support very high transfer speed, the cables are capable of supporting up to 1 gigabit applications at the same time being backward compatible with OM3 and OM2 infrastructure. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports.The ALOGIC OM4 Patch Cables are available in various lengths starting from .5m to 3 m length PRODUCT SPECIFICATIONConnector type | LC, LC | Wavelengths | 50 m (OM4)/125 m | Attenuation | At 850 nm: <3.0 dB per km | | At 1300 nm: <1.2 dB per km | Insertion loss | <0.5 dB per 300 m @ 850 nm or 1300 nm | Fiber | Glass | Number of fibers | 2 | Jacket | LSZH (Low Smoke Zero Halogen) | Cable outer diameter | 3mm +/-0.2mm | Safety | ETL/c-ETL | Warranty | Lifetime |
|
|
|
|
|
| |
| |
| Part No: 457707 Manufacturer No. LCALCA-20-OS2 Available $38.80 The Single mode OS2 cables are designed to support very high transfer speed and have universal loose tube construction, the ALOGIC cables are compliant to fibre type B1.3 in IEC 6 793-2-5 7 G652d capable of supporting up to 1 gigabit applications over very long distances. * PRODUCT SPECIFICATIONConnector Type | LCA, LCA | Wavelength | 9/125 m | Insertion Loss | <0.3 dB per 300 m @ 1550 nm or 1300 nm | Fiber | Glass | Number of Fibers | 2 | Jacket | LSZH | Cable Outer Diameter | 3.0 mm | Warranty | Life Time |
|
|
|
|
|
| Part No: 457635 Manufacturer No. LCSC-20-OM4 Available $42.55
The Multi Mode OM4 cables are designed to support very high transfer speed, the cables are capable of supporting up to 1 gigabit applications at the same time being backward compatible with OM3 and OM2 infrastructure. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports.The ALOGIC OM4 Patch Cables are available in various lengths starting from .5m to 3 m length PRODUCT SPECIFICATIONConnector type | LC,SC | Wavelengths | 50 m (OM4)/125 m | Attenuation | At 850 nm: <3.0 dB per km | | At 1300 nm: <1.2 dB per km | Insertion loss | <0.5 dB per 300 m @ 850 nm or 1300 nm | Fiber | Glass | Number of fibers | 2 | Jacket | LSZH (Low Smoke Zero Halogen) | Cable outer diameter | 3mm +/-0.2mm | Safety | ETL/c-ETL | Warranty | Lifetime |
|
|
|
|
|
| Part No: 457648 Manufacturer No. LCST-20-OS2 Available $31.20 The Single mode OS2 cables are designed to support very high transfer speed and have universal loose tube construction, the ALOGIC cables are compliant to fibre type B1.3 in IEC 6 793-2-5 7 G652d capable of supporting up to 1 gigabit applications over very long distances. * PRODUCT SPECIFICATIONConnector Type | LC ST | Wavelength | 9/125 m | Insertion Loss | <0.3 dB per 300 m @ 1550 nm or 1300 nm | Fiber | Glass | Number of Fibers | 2 | Jacket | LSZH | Cable Outer Diameter | 3.0 mm | Warranty | Life Time |
|
|
|
|
|
| |
| Part No: 457414 Manufacturer No. SCALC-20-OS2 Available $34.40 The Single mode OS2 cables are designed to support very high transfer speed and have universal loose tube construction, the ALOGIC cables are compliant to fibre type B1.3 in IEC 6 793-2-5 7 G652d capable of supporting up to 1 gigabit applications over very long distances. * PRODUCT SPECIFICATIONConnector Type | SCA, LC | Wavelength | 9/125 m | Insertion Loss | <0.3 dB per 300 m @ 1550 nm or 1300 nm | Fiber | Glass | Number of Fibers | 2 | Jacket | LSZH | Cable Outer Diameter | 3.0 mm | Warranty | Life Time |
PRODUCT FEATURE* Single Mode OS2 fibre optic cable. * Available in various lengths starting from .5m to 3 m length. * compliant to fibre type B1.3 in IEC 6 793-2-5 &G652d. * Low Smoke Zero Halogen Jacket for minimal toxic emissions in case of fire * 1 % optically tested and provided with test reports. * Life Time warranty.
|
|
|
|
|
| Part No: 457421 Manufacturer No. SCSC-20-OS2 Available $28.90 The Single mode OS2 cables are designed to support very high transfer speed and have universal loose tube construction, the ALOGIC cables are compliant to fibre type B1.3 in IEC 6 793-2-5 7 G652d capable of supporting up to 1 gigabit applications over very long distances. * PRODUCT SPECIFICATIONConnector Type | SC SC | Wavelength | 9/125 m | Insertion Loss | <0.3 dB per 300 m @ 1550 nm or 1300 nm | Fiber | Glass | Number of Fibers | 2 | Jacket | LSZH | Cable Outer Diameter | 3.0 mm | Warranty | Life Time |
PRODUCT FEATURE* Single Mode OS2 fibre optic cable. * Available in various lengths starting from .5m to 3 m length. * compliant to fibre type B1.3 in IEC 6 793-2-5 &G652d. * Low Smoke Zero Halogen Jacket for minimal toxic emissions in case of fire * 1 % optically tested and provided with test reports. * Life Time warranty.
|
|
|
|
|
| Part No: 457487 Manufacturer No. SS3-50 Available $6.75 5 cm 18 degree to 9 degree SATA 3 Cable (Supports 6 GB Data Transfer Speed)
|
|
|
|
|
| |
| Part No: 457394 Manufacturer No. SC6-PT-25-OM1 Available $191.50 ALOGIC 25m 6 Core SC Preterminated Indoor / Outdoor Riser Multimode OM1 Fibre Cable PRODUCT FEATURE
|
|
|
|
|
| Part No: 457234 Manufacturer No. C6-25-Green Available $46.65 ALOGIC Cat6 snagless patch cables are ideal to handle ultrahigh speed and multigigabit protocols to transfer large volumes of voice data video and communications signals. ALOGIC CAT6 cables can help to improve the networks speeds by reducing impedanc
|
| |
| Part No: 457649 Manufacturer No. LCST-25-OM3 Available $35.85 The Multi Mode OM3 cables are designed to support high transfer speed, the cables are capable of supporting up to 1 gigabit applications at the same time being backward compatible with 5 /125 OM2 infrastructure. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports.The ALOGIC OM3 Patch Cables are available in various lengths starting from .5m to 3 m length PRODUCT SPECIFICATIONConnector type | LC,ST | Wavelengths | 50 m (OM3)/125 m | Attenuation | At 850 nm: <2.3 dB per km | | At 1300 nm: <0.6dB per km | Insertion loss | <0.2dB per 300 m @ 850 nm or 1300 nm | Fiber | Glass | Number of fibers | 2 | Jacket | LSZH (Low Smoke Zero Halogen) | Cable outer diameter | 2mm +/-0.2mm | Safety | ETL/c-ETL | Warranty | Lifetime |
|
|
|
|
|
| Part No: 457581 Manufacturer No. DVI-DL-02-MF Available $18.95 This ALOGIC DVI-D Dual Link Extension Video Cable - Male to Female cable used to extend a DVI connection from a currently installed DVI cable to a DVI enabled device. The DVI-D dual link configuration supports resolutions up to 3840 x 2160 pixels.The cable has 28 AWG copper conductors, which are individually insulated to minimize crosstalk, and ensure high-speed, error-free transmission. PRODUCT SPECIFICATION * Foil shielded and braid shielded * 28 AWG copper conductors * Supports resolutions up to 3840 x 2160 pixels * Digital transmission rate up to 9.9Gbps * (1) DVI-D Dual Link Male to (1) DVI-D Dual Link Female PRODUCT FEATURE * Gold-plated contacts provide full conductivity with no data loss. |
| Part No: 457657 Manufacturer No. MF-3PRTC15-02 Available $11.95 ALOGIC Aus 3 Pin Mains Plug to IEC C15 High Temperature - Male to Female Power Cable with elastomer flex is moistly used in computer servers and home appliances with high temperature requirements. The cables has a high-temperature, notched-type IEC-C15 connector at one end and Australian 3-pin mains plug at the other end.
PRODUCT SPECIFICATION * The cables is Electrical Safety Authority Approved. * Compliant with AS/NZS3112. * Black Colour, Moulded design. * Notched type IEC C15 Connector at one end. PRODUCT FEATURE * Insulted Pins as per Australian Standards.* Warranty: Life Time.
|
| |
| Part No: 457580 Manufacturer No. DVI-DL-02B-MM Available $19.90 This ALOGIC DVI-D Dual Link Digital Video Cable Male to Male cable used to connect a computer with a DVI enabled output or a DVI enabled video card to a display with a DVI input. The DVI-D dual link configuration supports resolutions up to 2560 x 1600 pixels.The cable has 28 AWG copper conductors which are individually insulated to minimize crosstalk and ensure highspeed errorfree transmission.
|
| |
| |
| |
| |
| |
| |
| Part No: 457266 Manufacturer No. MF-C14RTC15-02 Available $9.15 This ALOGIC IEC C14 to Down Angle IEC C15 High Temperature - Male to Female power cable is mostly used in high temperature applications with HP/ CISCO Switches &evices. The IEC C15 Connector on the cable is notched at the bottom and can be differentiated by that notch from a IEC C13 connector, the IEC C15 connector can still be used where IEC C13 connector is used but NOT vice versa as the this cable is rated for 248 degrees rather than the 158 degree for C13 connectors. PRODUCT SPECIFICATION* The cables is Electrical Safety Authority Approved. * Compliant with AS/NZS3112. * (1) IEC C14 Male &1) Down Angle IEC C15 Female Connectors * Black Colour, Moulded design. * High Temperature RR Flex
PRODUCT FEATURE* Available in various lengths.* Warranty: Life Time.
|
|
|
|
|
| |
| |
| |
| |
| Part No: 457614 Manufacturer No. LCLC-02-OM4 Available $16.50 The Multi Mode OM4 cables are designed to support very high transfer speed, the cables are capable of supporting up to 1 gigabit applications at the same time being backward compatible with OM3 and OM2 infrastructure. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports.The ALOGIC OM4 Patch Cables are available in various lengths starting from .5m to 3 m length PRODUCT SPECIFICATIONConnector type | LC, LC | Wavelengths | 50 m (OM4)/125 m | Attenuation | At 850 nm: <3.0 dB per km | | At 1300 nm: <1.2 dB per km | Insertion loss | <0.5 dB per 300 m @ 850 nm or 1300 nm | Fiber | Glass | Number of fibers | 2 | Jacket | LSZH (Low Smoke Zero Halogen) | Cable outer diameter | 3mm +/-0.2mm | Safety | ETL/c-ETL | Warranty | Lifetime |
|
|
|
|
|
| Part No: 457615 Manufacturer No. LCLC-02-OS2 Available $15.65 The Single mode OS2 cables are designed to support very high transfer speed and have universal loose tube construction, the ALOGIC cables are compliant to fibre type B1.3 in IEC 6 793-2-5 7 G652d capable of supporting up to 1 gigabit applications over very long distances. * PRODUCT SPECIFICATIONConnector Type | LC LC | Wavelength | 9/125 m | Insertion Loss | <0.3 dB per 300 m @ 1550 nm or 1300 nm | Fiber | Glass | Number of Fibers | 2 | Jacket | LSZH | Cable Outer Diameter | 3.0 mm | Warranty | Life Time |
|
|
|
|
|
| Part No: 457626 Manufacturer No. LCSC-02-OS2 Available $17.85
The Single mode OS2 cables are designed to support very high transfer speed and have universal loose tube construction, the ALOGIC cables are compliant to fibre type B1.3 in IEC 6 793-2-5 7 G652d capable of supporting up to 1 gigabit applications over very long distances. * PRODUCT SPECIFICATIONConnector Type | LC SC | Wavelength | 9/125 m | Insertion Loss | <0.3 dB per 300 m @ 1550 nm or 1300 nm | Fiber | Glass | Number of Fibers | 2 | Jacket | LSZH | Cable Outer Diameter | 3.0 mm | Warranty | Life Time |
|
|
|
|
|
| Part No: 457639 Manufacturer No. LCST-02-OM4 Available $15.55 The Multi Mode OM4 cables are designed to support very high transfer speed, the cables are capable of supporting up to 1 gigabit applications at the same time being backward compatible with OM3 and OM2 infrastructure. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports.The ALOGIC OM4 Patch Cables are available in various lengths starting from .5m to 3 m length PRODUCT SPECIFICATIONConnector type | LC,ST | Wavelengths | 50 m (OM4)/125 m | Attenuation | At 850 nm: <3.0 dB per km | | At 1300 nm: <1.2 dB per km | Insertion loss | <0.5 dB per 300 m @ 850 nm or 1300 nm | Fiber | Glass | Number of fibers | 2 | Jacket | LSZH (Low Smoke Zero Halogen) | Cable outer diameter | 3mm +/-0.2mm | Safety | ETL/c-ETL | Warranty | Lifetime |
|
|
|
|
|
| Part No: 457257 Manufacturer No. MF-AUS3PC13-02-MC Available $17.60 This ALOGIC Medical Power Cable Aus 3 Pin Mains Plug to IEC C13 - Male to Female is used in medical equipment application. The orange color cable is fitted with transparent (clear) IEC-C13 female connector and transparent Australian 3-pin mains wall plug (male) with insulated pins compliant with AS/NZS3112. PRODUCT SPECIFICATION* The cables is Electrical Safety Authority Approved * Australian Standard AS/NZS3112 Compliant * Orange Colour, Transparent Plugs, Moulded design * 10A/250 V Rating PRODUCT FEATURE* Available in various lengths* Insulted Pins* Suitable for application in hospitals and medical equipments* Life Time Warranty
|
|
|
|
|
| Part No: 457259 Manufacturer No. MF-AUS3PC13RT-02-MC Available $22.75
This ALOGIC Medical Power Cable Aus 3 Pin Mains Plug to Right Angle IEC C13 - Male to Female is used in medical equipment application. The orange color cable is fitted with transparent (clear) Right Angle IEC-C13 female connector and transparent Australian 3-pin mains wall plug (male) with insulated pins compliant with AS/NZS3112. PRODUCT SPECIFICATION* The cables is Electrical Safety Authority Approved * Australian Standard AS/NZS3112 Compliant * Orange Colour, Transparent Plugs, Moulded design * 10A/250 V Rating PRODUCT FEATURE* Available in various lengths* Insulted Pins* Suitable for application in hospitals and medical equipments* Life Time Warranty
|
|
|
|
|
| Part No: 457651 Manufacturer No. MDP-DP-02-MM Available $17.60 This ALOGIC 2m Mini DisplayPort to DisplayPort Cable Ver 1.2 - Male to Male cable allows for a connection between a computer enabled with a Mini DisplayPort output like Apple Mac, HP, Lenovo, Dell, Ultrabook and laptop to a display enabled with a DisplayPort input. The cable can support resolutions up to 384 X 216 .
PRODUCT SPECIFICATION * 28 gauge (AWG) pure copper wire
* Aluminium and Mylar shielding to help eliminate EMI and RFI
* Resolution capability of up to 3840 X 2160.
* (1) Mini DisplayPort Male to (1) DisplayPort Male
PRODUCT FEATURE * Gold Plated connectors for best connectivity and minimum loses.
* Retail Box Packaging.
* Warranty: Life Time
|
| |
| |
| |
| |
| |
| |
| |
| Part No: 457252 Manufacturer No. MF-3PRTC13-02 Available $7.70 No additional information available at time of listing |
| Part No: 457358 Manufacturer No. SCPT-OM3-02 -12 Available $104.95 SC Pigtail OM3 SX 2 Meter 12Colour
|
| |
| Part No: 457382 Manufacturer No. SCALC-02-OS2 Available $19.25 The Single mode OS2 cables are designed to support very high transfer speed and have universal loose tube construction, the ALOGIC cables are compliant to fibre type B1.3 in IEC 6 793-2-5 7 G652d capable of supporting up to 1 gigabit applications over very long distances. * PRODUCT SPECIFICATIONConnector Type | SCA, LC | Wavelength | 9/125 m | Insertion Loss | <0.3 dB per 300 m @ 1550 nm or 1300 nm | Fiber | Glass | Number of Fibers | 2 | Jacket | LSZH | Cable Outer Diameter | 3.0 mm | Warranty | Life Time |
PRODUCT FEATURE* Single Mode OS2 fibre optic cable. * Available in various lengths starting from .5m to 3 m length. * compliant to fibre type B1.3 in IEC 6 793-2-5 &G652d. * Low Smoke Zero Halogen Jacket for minimal toxic emissions in case of fire * 1 % optically tested and provided with test reports. * Life Time warranty.
|
|
|
|
|
| Part No: 457424 Manufacturer No. SCST-02-OS2 Available $16.15 The Single mode OS2 cables are designed to support very high transfer speed and have universal loose tube construction, the ALOGIC cables are compliant to fibre type B1.3 in IEC 6 793-2-5 7 G652d capable of supporting up to 1 gigabit applications over very long distances. * PRODUCT SPECIFICATIONConnector Type | SC ST | Wavelength | 9/125 m | Insertion Loss | <0.3 dB per 300 m @ 1550 nm or 1300 nm | Fiber | Glass | Number of Fibers | 2 | Jacket | LSZH | Cable Outer Diameter | 3.0 mm | Warranty | Life Time |
PRODUCT FEATURE* Single Mode OS2 fibre optic cable. * Available in various lengths starting from .5m to 3 m length. * compliant to fibre type B1.3 in IEC 6 793-2-5 &G652d. * Low Smoke Zero Halogen Jacket for minimal toxic emissions in case of fire * 1 % optically tested and provided with test reports. * Life Time warranty.
|
|
|
|
|
| |
| |
| |
| Part No: 457344 Manufacturer No. C6-2.5-Yellow Available $7.45 ALOGIC Cat6 snagless patch cables are ideal to handle ultra-high speed and multi-gigabit protocols to transfer large volumes of voice, data, video and communications signals. ALOGIC CAT6 cables can help to improve the networks speeds by reducing impedance loss and network return loss in your network by as much as 4 %. The cables consist of 4 pairs of 24 AWG insulated copper conductors separated by a cross to maintain a uniform distance between them which leads to improved cross talk performance, low insertion loss and higher data rates. Gold plated connectors ensure crystal clear transmission and the custom designed snagless boot protects the cable from any damage during installation.ALOGIC CAT6 snagless patch cables come in 1 different colours and a range of lengths from .3 m to 5 m, which lets you colour code your installation. PRODUCT SPECIFICATIONVendor | ALOGIC | Wiring Scheme: | T568A | Standard: | Category 6 TIA/EIA-568-B-2.1, draft 9 | Connector | 50 micron gold-plated RJ45 | Temperature Rating: | 60C | Voltage Rating : | 30V | Approvals | RoHS Compliant | Warranty | Lifetime | Package Type | Polybag | Jacket | PVC | Connector Type | 8P8C (RJ45) | Conductor Type | 24AWG (7/0.20), Stranded Bare Copper |
PRODUCT FEATURE* All ALOGIC CAT6 cables are A-Tick compliant with ACMA requirements.* Supports 1 Base-T, 1 Base-T, and 1 Base-T Network* Constructed from high quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels.* Available in 1 colours to easily colour-code your network installation.* Meets and exceeds all Cat6 TIA/EIA-568-B-2.1, draft 9 standards* 5 -micron gold-plated connectors to ensure clear transmissions* Snagless moulded connectors to protect the RJ45 retaining clips from damage during installation.
|
|
|
|
|
| |
| |
| |
| |
| Part No: 457250 Manufacturer No. MF-3PC13RT-02 Available $10.90 ALOGIC 2m 3 Pin Aus Male to Right Angle IEC C13 Female Power Cable |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| Part No: 457378 Manufacturer No. LCSC-20-OS2 Available $33.05 The Single mode OS2 cables are designed to support very high transfer speed and have universal loose tube construction, the ALOGIC cables are compliant to fibre type B1.3 in IEC 6 793-2-5 7 G652d capable of supporting up to 1 gigabit applications over very long distances. * PRODUCT SPECIFICATIONConnector Type | LC SC | Wavelength | 9/125 m | Insertion Loss | <0.3 dB per 300 m @ 1550 nm or 1300 nm | Fiber | Glass | Number of Fibers | 2 | Jacket | LSZH | Cable Outer Diameter | 3.0 mm | Warranty | Life Time |
PRODUCT FEATURE* Single Mode OS2 fibre optic cable. * Available in various lengths starting from .5m to 3 m length. * compliant to fibre type B1.3 in IEC 6 793-2-5 &G652d. * Low Smoke Zero Halogen Jacket for minimal toxic emissions in case of fire * 1 % optically tested and provided with test reports. * Life Time warranty.
|
|
|
|
|
| |
| Part No: 457583 Manufacturer No. DVI-DL-03-MF Available $22.15 This ALOGIC DVI-D Dual Link Extension Video Cable - Male to Female cable used to extend a DVI connection from a currently installed DVI cable to a DVI enabled device. The DVI-D dual link configuration supports resolutions up to 3840 x 2160 pixels.The cable has 28 AWG copper conductors, which are individually insulated to minimize crosstalk, and ensure high-speed, error-free transmission. PRODUCT SPECIFICATION * Foil shielded and braid shielded * 28 AWG copper conductors * Supports resolutions up to 3840 x 2160 pixels * Digital transmission rate up to 9.9Gbps * (1) DVI-D Dual Link Male to (1) DVI-D Dual Link Female PRODUCT FEATURE * Gold-plated contacts provide full conductivity with no data loss. |
| |
| |
| |
| Part No: 457321 Manufacturer No. PHD-03-MM-V2 Available $29.85 All new ALOGIC Carbon Series offers exceptional performance for all HDMI applications. The custom designed cable provides carbon fibre like fit and finish on a HDMI cable. The die cast connectors sport a seamless design for perfect fit on the HDMI re
|
| Part No: 457582 Manufacturer No. DVI-DL-03B-MM Available $22.65 This ALOGIC DVI-D Dual Link Digital Video Cable Male to Male cable used to connect a computer with a DVI enabled output or a DVI enabled video card to a display with a DVI input. The DVI-D dual link configuration supports resolutions up to 2560 x 1600 pixels.The cable has 28 AWG copper conductors which are individually insulated to minimize crosstalk and ensure highspeed errorfree transmission.
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| Part No: 457616 Manufacturer No. LCLC-03-OS2 Available $17.00 The Single mode OS2 cables are designed to support very high transfer speed and have universal loose tube construction, the ALOGIC cables are compliant to fibre type B1.3 in IEC 6 793-2-5 7 G652d capable of supporting up to 1 gigabit applications over very long distances. * PRODUCT SPECIFICATIONConnector Type | LC LC | Wavelength | 9/125 m | Insertion Loss | <0.3 dB per 300 m @ 1550 nm or 1300 nm | Fiber | Glass | Number of Fibers | 2 | Jacket | LSZH | Cable Outer Diameter | 3.0 mm | Warranty | Life Time |
|
|
|
|
|
| |
| Part No: 457704 Manufacturer No. LCALCA-03-OS2 Available $22.40 The Single mode OS2 cables are designed to support very high transfer speed and have universal loose tube construction, the ALOGIC cables are compliant to fibre type B1.3 in IEC 6 793-2-5 7 G652d capable of supporting up to 1 gigabit applications over very long distances. * PRODUCT SPECIFICATIONConnector Type | LCA, LCA | Wavelength | 9/125 m | Insertion Loss | <0.3 dB per 300 m @ 1550 nm or 1300 nm | Fiber | Glass | Number of Fibers | 2 | Jacket | LSZH | Cable Outer Diameter | 3.0 mm | Warranty | Life Time |
|
|
|
|
|
| Part No: 457627 Manufacturer No. LCSC-03-OS2 Available $18.90 The Single mode OS2 cables are designed to support very high transfer speed and have universal loose tube construction, the ALOGIC cables are compliant to fibre type B1.3 in IEC 6 793-2-5 7 G652d capable of supporting up to 1 gigabit applications over very long distances. * PRODUCT SPECIFICATIONConnector Type | LC SC | Wavelength | 9/125 m | Insertion Loss | <0.3 dB per 300 m @ 1550 nm or 1300 nm | Fiber | Glass | Number of Fibers | 2 | Jacket | LSZH | Cable Outer Diameter | 3.0 mm | Warranty | Life Time |
|
|
|
|
|
| Part No: 457641 Manufacturer No. LCST-03-OM4 Available $17.05 The Multi Mode OM4 cables are designed to support very high transfer speed, the cables are capable of supporting up to 1 gigabit applications at the same time being backward compatible with OM3 and OM2 infrastructure. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports.The ALOGIC OM4 Patch Cables are available in various lengths starting from .5m to 3 m length PRODUCT SPECIFICATIONConnector type | LC,ST | Wavelengths | 50 m (OM4)/125 m | Attenuation | At 850 nm: <3.0 dB per km | | At 1300 nm: <1.2 dB per km | Insertion loss | <0.5 dB per 300 m @ 850 nm or 1300 nm | Fiber | Glass | Number of fibers | 2 | Jacket | LSZH (Low Smoke Zero Halogen) | Cable outer diameter | 3mm +/-0.2mm | Safety | ETL/c-ETL | Warranty | Lifetime |
|
|
|
|
|
| Part No: 457642 Manufacturer No. LCST-03-OS2 Available $17.00 The Single mode OS2 cables are designed to support very high transfer speed and have universal loose tube construction, the ALOGIC cables are compliant to fibre type B1.3 in IEC 6 793-2-5 7 G652d capable of supporting up to 1 gigabit applications over very long distances. * PRODUCT SPECIFICATIONConnector Type | LC ST | Wavelength | 9/125 m | Insertion Loss | <0.3 dB per 300 m @ 1550 nm or 1300 nm | Fiber | Glass | Number of Fibers | 2 | Jacket | LSZH | Cable Outer Diameter | 3.0 mm | Warranty | Life Time |
|
|
|
|
|
| |
| |
| |
| |