RV120W-A-AU | Cisco RV120W Wireless-N VPN Firewall - 4-Port 10/100Mbps

 
The Cisco® RV 120W Wireless-N VPN Firewall combines highly secure connectivity – to the Internet as well as from
other locations and remote workers – with a high-speed, 802.11n wireless access point, a 4-port switch, an intuitive,
browser-based device manager, and support for the Cisco FindIT Network Discovery Utility, all at a very affordable
price. Its combination of high performance, business-class features and top-quality user experience takes basic
connectivity to a new level

The Cisco RV 120W Wireless-N VPN Firewall

Features:

- High-speed, standards-based 802.11n wireless connectivity to help employees stay productive while away from their desks
- Integrated 4-port 10/100 switch with quality of service (QoS) support for enhanced voice, video and data traffic
- Support for separate �gvirtual�h networks enables you to control access to sensitive information and to set up highly secure wireless guest access
- IP Security (IPsec) VPN support with hardware acceleration to deliver highly secure, high-performance connections to multiple locations and traveling employees
- Support for static routing, Routing Information Protocol (RIP) versions 1 and 2, and inter-VLAN routing to enable flexible connection sharing
- Proven stateful packet inspection (SPI) firewall, plus advanced wireless security to help keep business assets safe
- Simplified configuration through an intuitive, browser-based device manager
- Support for the Cisco FindIT Network Discovery Utility

- 4-Port 10/100Mbps Switch

- Omni Directional Antennas

- 10/100Mbps WAN

 

- Static routing
- RIP v1 and v2
- Inter-VLAN routing

 

Layer 2

 

- 802.1q -based VLANs
- 4 active VLANs (1 to 4094 range)

 

 

- Dynamic Host Configuration Protocol (DHCP) server, DHCP relay agent
- Point-to-Point Protocol over Ethernet (PPPoE), Point-to-Point Tunneling Protocol (PPTP), Layer 2 Tunneling Protocol (L2TP)
- DNS Proxy
- IGMP Proxy and multicast forwarding
- Dynamic Domain Name System (DynDNS, TZO)
- Network Address Translation (NAT), Port Address Translation (PAT), Network Address Port Translation (NAPT), Session Initiation Protocol Application Layer Gateway (SIP ALG), NAT traversal, one-to-one NAT
- Multiple DHCP pools
- Port Management

 

 

- Dual-stack IPv4 and IPv6
- Multicast Listener Discovery (MLD) for IPv6 (RFC2710)
- Stateless address auto-configuration
- DHCP v6
- Internet Control Message Protocol (ICMP) v6

 

 

 
- IP access control lists (ACLs)
- MAC-based wireless access control

Firewall:

- SPI firewall
- Port forwarding and triggering
- DoS prevention
- Software based DMZ

- Static URL blocking or keyword blocking

- HTTPS
- Username/password

 

 
- Port-based RADIUS authentication (Extensible Authentication Protocol [EAP], Protected EAP [PEAP])

 
- X.509 v3 certificates
- Certificate upload using PEM format

 

 

- 10 QuickVPN tunnels for remote client access
- 10 IPsec site-to-site tunnels for branch office connectivity
- Triple Data Encryption Standard (3DES), Advanced Encryption Standard (AES) encryption
- Message Digest Algorithm 5 (MD5)/Secure Hash Algorithm (SHA1) authentication
- Dead Peer Detection (DPD)
- IPsec NAT traversal
- VPN pass-through of PPTP, L2TP, IPsec

 

 

- 802.1p port-based priority on LAN port, application-based priority on WAN port
-  4 queues
- DiffServ support
- Traffic Metering

 

WLAN hardware

 

IEEE 802.11n standard-based access point with 802.11b/g compatibility
Radio and modulation type:
- 802.11b: direct sequence spread spectrum (DSSS)
- 802.11g/n: orthogonal frequency division multiplexing (OFDM)
- 2 omnidirectional 1.8 dBi gain external antennas

Operating channels:
- 11 in North America
- 13 in most of Europe
- Automatic channel selection

Transmit power:
- 802.11b: 17 dBm +/. 1.5 dBm
- 802.11g: 15 dBm +/.1.5 dBm
- 802.11n: 12.5 dBm +/. 1.5 dBm

Receiver sensitivity:
- 802.11b: 11 Mbps@ .90 dBm
- 802.11g: 54 Mbps @ .74 dBm
- 802.11n: 270 Mbps @ .71 dBm

Wireless Domain Services (WDS):
- Allows wireless signals to be repeated by up to 2 compatible receivers

Wi-Fi Multimedia (WMM):
- WMM with QoS (802.11e)
- WMM Power Save (WMM-PS)

Active WLAN clients

- Up to 64 clients

Service Set Identifiers (SSIDs)

- Up to 4 separate virtual networks

Wireless VLAN

- Support for SSID to VLAN mapping with wireless client isolation

WLAN security

- Wi-Fi Protected Access (WPA2, 802.11i)

 

WAN - 10/100 Mbps Fast Ethernet WAN port
LAN - 4-port 10/100 Mbps switch with support for VLAN and QoS
WLAN - Built-in high-speed 802.11n wireless access point
Physical dimensions and weight -  W x D x H = 5.91 in. x 5.91 in. x 1.34 in. (150 mm x 150 mm x 34 mm)
Weight: 1.10 lb (0.5 kg)
Power 12V 1A
Certification Â�œ FCC Class B
CE
IC
Wi-Fi
Environmental operating range Â�œ Operating temperature: 0Â�‹ to 40Â�‹C (32Â�‹ to 104Â�‹F)
Storage temperature: .20Â�‹ to 70Â�‹C (.4Â�‹ to 158Â�‹F)
Operating humidity: 10% to 85% noncondensing
Storage humidity: 5% to 90% noncondensing