We are still open due to COVID. Online orders are unaffected. Please order online for pickup rather than coming into the store. If you require assistance please phone our sales staff. Please practice social distancing and consider waiting outside while other customers are being served.
Netcomm NTC-6200-02 Industrial 3G M2M Router (800/850/900/2100/1900)
The 3G M2M Router series (NTC-6200) delivers state-of-the-art M2M connectivity to a broad range of applications. The all-new NTC-6200 series brings together the choice of 3 powerful gateways with different connectivity options so you can choose the best gateway to suit your individual requirements. Designed with durability, ease of use and added intelligence, the NTC-6200 is designed to utilise the freedom of wireless networks to deliver seamless M2M connectivity.
NTC-6200 overview 1
NTC-6200 overview 2
The NTC-6200 series connects to worldwide 3G networks at speeds of up to 14.4Mbps. With no dependence on a landline, these routers can be deployed in any location to allow remote access, monitoring and control of connected devices.

Featuring Ethernet, Serial (RS232/422/485), and USB 2.0 connectivity, the NTC-6200 series can interface with a diverse range of equipment used in a wide variety of vertical applications.
PoE &Zigbee
These features are included in the top end NTC-6200 model (see below for comparison). PoE (Power over Ethernet) enables the router to draw power via the Ethernet port which allows the router to be positioned in areas that are hard to reach and not serviced by mains power.
Zigbee is a new technology that allows multipoint mesh wireless networking that can be used to interface with a variety of sensors for data updates, monitoring of equipment and automation.
NTC-6200 overview 3
NTC-6200 overview 4
These features are included in both the top end and mid-range NTC-6200 models (see below for comparison). The built-in GPS can be used for applications that are mobile where the router can be traced and tracked to see the location of connected devices.
The 3 multipurpose I/O ports can be used to attach a number of sensors that can relay information about the physical environment. One I/O port is a dedicated ignition input that can power the router when a vehicle is started providing further powering flexibility.
Model NTC-6200-02 NTC-6200-12 NTC-6200-13


Yes Yes No

3 x Multipurpose I/O ports

Yes Yes No

1 x Ignition sensing port

Yes Yes No

Regulatory Certifications

  • CE (Europe)
  • RCM (Australia/New Zealand)
  • E-Mark (Europe)
  • TRA (UAE)
  • iDA (Singapore)
  • GCF (Europe)
  • RoHS
  • IC (Canada)
  • FCC (USA)
  • NBTC (Thailand)
  • SIRIM (Malaysia)
  • SDPPI (Indonesia)
  • IP41
  • JRF (Japan)
  • JPA (Japan)
  • JRF (Japan)
  • JPA (Japan)

Carrier Approvals

  • AT&
  • Rogers
  • Spark
  • NTT DoCoMo*

Technical Specifications


  • Powerful 450Mhz ARM9 processor with 64MByte DDR2 Ram
  • 256MByte Flash memory storage (~120MB available on board space for user storage)


  • Embedded Linux 3.6


  • HSDPA/HSUPA data rates: DL: 7.2 / 14.4 Mbps, UL: 2.0 / 5.76 Mbps (Concurrent data rate: DL: 7.2 Mbps, UL: 5.76 Mbps)
  • UMTS data rates: DL: max. 384 kbps, UL: max. 384 kbps
  • EDGE class 12: DL: max. 237 kbps, UL: max. 237 kbps
  • GPRS class 12: DL: max. 85.6 kbps, UL: max. 85.6 kbps
  • CSD data transmission 14.4 kbps, V.110


  • UMTS/HSDPA/HSUPA: 800/850/900/2100/1900 MHz
  • GSM/GPRS/EDGE: 850/900/1800/1900 MHz


  • 1 x (RJ-45) Fast Ethernet 10/100Base-TX (100Mbps) Port with Auto MDIX
  • 1 x RS232 Serial Port DB-9 female DCE supporting either 9 wire RS232 or RS485/RS422 (software selectable).
  • Software controlled termination resistors for RS485
  • Mini USB 2.0 OTG interface with 0.5A supply capability
  • 3x Multipurpose I/O pins*


  • NAMUR (EN 60947-5-6 / IEC 60947-5-6) compatible sensor input
  • Analogue 0V to 30V input
  • Digital input (through measurement of voltage above/below threshold)
  • Open collector output


  • Lockable Tray Reader with Push-Button-to-Release
  • Supports Mini USIM/SIM Format (2FF)


  • Reset button (recessed, requiring pen/paperclip) with three functions: Reboot, reboot into recovery mode, and reset unit to factory defaults


  • 2 x SMA connectors for 2G/3G (1 x Main and 1 x RX Diversity)
  • 1 x SMA connector for GPS*


  • 8 x tri-colour LEDs. Power, Network, a GPS/customizable LED and 5x Signal Strength indicators
  • Easy and clear LED status display for connection status, connected network type, and connection errors


  • Profile managed packet data connections
  • NAT Disable for framed route configuration
  • Transparent bridge mode using PPPoE to allow the router to transparently forward Public WAN IP address to a downstream device
  • SIM Security Management (PIN configuration, enable and disable)
  • Automatic and manual cellular band selection
  • Automatic and manual operator selection


  • Embedded GPS receiver (1575.42Mhz)
  • SMA Connector for external active GPS Antenna
  • Active antenna voltage: 3.05V
  • Maximum current: 50mA
  • Short circuit protection
  • Tracking sensitivity under open sky: -159dBm
  • Acquisition sensitivity under open sky: -149dBm
  • Cold start sensitivity: -145dBm
  • Time to first fix (TTFF): Cold 25s, Warm 10s, Hot 3s
  • Supports NMEA-0183 (v2.3)
  • Redirect NMEA stream to serial or forward over IP
  • Odometer reading available via Web-UI, CLI and SDK


  • Static Routing, RIP (v1/v2), Port Forwarding and DMZ
  • Dynamic DNS
  • VRRP for redundant router failover
  • DHCP Server, including:
    • Address reservation by MAC address
    • Custom DNS server definitions
    • DHCP Relay
    • DHCP list display in Web-UI
    • Advanced DHCP Option configuration (Option 42 NTP, Option 66 TFTP, Option 150, Option 160)
  • Data Stream Manager providing ability to create mappings between input and output ports (e.g. Serial Port, SMS, GPS, USB) and perform required translation or data processing by each virtual tunnel
  • Modbus Server TCP/IP Gateway and Client TCP/IP Agent with up to 247 slaves connected to the Serial TCP/IP Gateway
  • Modbus RTU/ASCII frames support


  • PPTP Client for VPN connectivity to remote PPTP VPN Server
  • IPSec tunnel termination (for up to 5 tunnels)
  • GRE Tunnelling
  • OpenVPN (Client, Server and P2P)


  • Web-based User Interface (HTTP/HTTPS) for full device status and configuration
  • Password protected configuration file backup and restore for quick device configuration and device cloning
  • Telnet/SSH Command Line Interface for status monitoring, configuration and control
  • SNMP v1/v2 including cellular specific MIB, config and firmware download
  • TR-069 Client for remote device configuration, configuration backup and restore, and firmware upgrade
  • SMS Client (Send/Receive) including inbox, outbox
  • Ping monitor watchdog (Reset connection on repeated ping failure)
  • Diagnostic Log Viewer (remote and local)
  • System Status and Security Logs
  • NTP Server Support for network time sync of devices system clock
  • Device User Guide stored on the device and accessible via the Web-based User Interface (HTTP/HTTPS)
  • Advanced Diagnostics and Control via SMS
    • Query status information such as Signal Strength, WAN IP, Uptime, and many more
    • Configure device remotely via SMS such as APN, authentication settings, and many more
    • Execute commands via SMS such as reboot, reset to defaults, go offline, and many more
    • Secure SMS management using sender whitelisting and password management
    • SMS acknowledgement replies for queries and commands


  • Firmware Upgrade locally via LAN or remotely Over-The-Air (HTTP/HTTPS, SNMP, TR-069 or LWM2M)
  • Multiple firmware image storage on device and dynamic install
  • Triggered firmware upgrade via SMS (initiate download &install from HTTP/HTTPS)


  • Develop and install custom software applications
  • Open Linux standard development environment
  • Develop applications/scripting in standard ANSI C/Shell script and LUA
  • Package manager built into Web-UI for Application installation/removal
  • API (C, LUA and Shell libraries) to the units internal Runtime Database to allow full status monitoring configuration and control of the device from custom applications


  • Module Operating Temperature Range: -40C ~ +85C
  • Storage Temperature Range: -40C ~ +85C
  • Operating Humidity: 0-95%


  • Power input and I/Os via 6 way termination block receptacle
  • Field terminable power input via screw type terminal block included
  • DC Power (8 - 40V DC)
  • 1 x Dedicated ignition input on 6 way connector
  • Power consumption 6W, recommended DC supply via terminal block (12V 1.5A)
  • Vehicle compatible protection on DC Input Jack. (ISO7637 standard)


  • Device dimensions (excluding external antenna): 143mm (L) x 107mm (W) x 34mm (D) / 221g (254g with bracket)
  • Wall mount support in multiple orientations via embedded mounting holes
  • DIN Rail mount support via plastic bracket included in box (Top hat section rail TH 35 IEC60715)


  • FCC
  • CE
  • GCF
  • WEEE
  • RoHS
  • RCM
  • IC
  • E-mark
  • TRA
  • iDA
  • NBTC
  • IP41


  • AT&
  • Rogers
  • Spark
  • NTT DoCoMo**

No additional files, specification sheets, guides or documentation found for product.


You can finance this product via Flexirent! For more information regarding flexirent, and to use the flexirent finance calculator, please click here.

The calculator provides an indicative rental cost only. Flexirent prices quoted include GST and stamp duty. Subject to credit approval. To obtain full quote and pre-approval please contact Flexirent Customer Service on 1800 240 102. Rental is payable monthly.

Warranty: 1 year return to base

Full manufacturers warranty details are available at the manufacturers (Netcomm) web site.

Unless otherwise specified Techbuy is normally your first point of contact for warranty related returns, further information regarding our warranty policies and consumer guarantees is available on our policies and service & support pages.

To apply for return of a product just go to our returns page.

These terms are in addition to and do not affect any terms, conditions, guarantees and warranties implied by law.

Visitor Reviews

[ There are no visitor reviews for this product yet]

Review Product
Click on a thumbnail to view it below

No related products found.

L7: 7 | TM: 0 | LM: 16 | TY: 52 | T: 566

Secure Online Shopping

We accept the following with No surcharge on VISA, Mastercard and Paypal!
Techbuy Pty Ltd 2000 - 2020 All rights reserved.
All prices shown on techbuy.com.au are in $AUD and inclusive of GST. Prices and availability are subject to change without prior notice. Images displayed are accurate to the best of our knowledge and we will not be held responsible for purchases based soley on these images. All brands and names are trademarks of their respective companies. Shipping Australia wide to all metro and regional areas (Sydney, Melbourne, Brisbane, Adelaide, Perth) and Internationally. For more information, please see our usage policies.