All stock codes associated to this product
HRWM12RU4, HRWM12RU-4, 9318674894216
Overview
- IP20 Protection grading
- Pre-fitted with earth continuity leads between doors and chassis
- Improved scratch and scuff resistance
- Pre-fitted with earth continuity leads between doors and chassis
- Configured with L-bracket shelves and vent cover plates
The
Hypertec 19" Wall Mount Rack range provides effortless installation of
both the cabinet and your valuable equipment without compromising
cabinet strength or security.
We also offer a wide
range of rack and enclosure accessories allowing you to
customise your system to suit your data requirements. This accessory
range has been designed for maximum flexibility without compromising the
security of your valuable equipment or the strength of the enclosure.
Hypertec Wall Mount Enclosure Features• SPCC high quality cold roll steel - approx. 1.5mm thickness for mounting and 1.0mm for other parts• IP20 Protection grading• Depth adjustable side rails• RU positions marked for easy alignment and placement of equipment• Pre-fitted with earth continuity leads between doors and chassis• Epoxy polyester powder paint (Manex Black) with textured finish• Degreasing, and phosphoric acidification to the original metal providing strong bonding between paint and metal• Improved scratch and scuff resistance• Optional accessories include L-bracket shelves, lockable drawer and vertical cable management• Configured with L-bracket shelves and vent cover plates
• The door is a solid steel frame with a mounted tempered glass panel which provides a clear view of installed components• Lighter weight construction for easier wall mounting
• Large access holes on back for cable entry in from wallStandards Compliance• Protection rating IP20
• ANSI/EIARS-310-D
• IEC297-2
• DIN41491
• DIN41494
Important: Refer to the product Technical Data for important mounting guidelines
The Hypertec Wall Mount Enclosure is supplied with:
1 x
basic housing, 1 x 5mm glazed safety glass door with keyed lock, Earth
continuity wiring between door and chassis, 2 x side panels (Side panel
keyed cam locks are sold separately), 1 x top rear cable gland plate, 1 x
bottom rear access plate on wall mounted rack, 4 x 19" mounting
rails, 1 x L-bracket sets, fan cut out for one fan module (fan not
supplied), bag of 20 cage nuts and screws
Note: Key sets for front door and side panels (and swing frame) are different.
Ordering Information
Part No. |
RU Height |
Width mm |
Depth mm |
Height mm |
Weight kg |
L bracket rail sets |
Cooling fans cutouts |
Cage nuts & screws |
HRWM12RU-4 |
12 |
600 |
450 |
635 |
33.4 |
2 |
1 |
20 |
Compatible Parts
Description |
L bracket |
Cantilever shelf |
Fan Module |
Cam Lock |
Power Board |
Part No. |
HRLB300 |
HRCS300 |
HRFM |
HRRL |
PB4SW |