General |
DGS-1510-52XMP |
Port Standards & Functions |
IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet,
IEEE 802.3ab 1000BASE-T Gigabit |
|
Ethernet, 802.3ae 10 GbE, IEEE 802.3x Flow Control for Full-Duplex
Mode, Auto-negotiation |
Number of Ports |
48 x 10/100/1000 Mbps PoE |
|
capable, 4 x 10G SFP+ |
Network Cables |
UTP Cat. 5, Cat. 5e (100 m max.); EIA/TIA-568 100-ohm STP (100 m
max.) |
Full/Half Duplex |
Full/half-duplex for 10/100 Mbps and full-duplex for 1000 Mbps
speed |
Media Interface Exchange |
Auto or configurable MDI/MDIX |
|
|
Performance |
|
Switching Capacity |
176Gbps |
Transmission Method |
Store-and-forward |
MAC Address Table |
Up to 16,384 entries per device |
MAC Address Update |
Up to 512 static MAC entries, Enable/disable auto-learning of MAC
addresses |
Maximum 64 bytes Packet |
130.95Mpps |
Forwarding Rate |
|
Packet Buffer Memory |
3MB per device |
MTBF |
303,027 Hours |
|
|
PoE |
|
PoE Standard |
IEEE 802.3af, 802.3at |
PoE Capable Ports |
Ports 1 to 48: Up to 30 W |
PoE Power Budget |
Max. 370 W (740 W with DPS-700 |
|
RPS redundant power supply) |
|
|
Physical & Environment |
|
AC Input |
100 to 240 VAC 50/60 Hz internal universal power
supply |
Maximum Power Consumption |
486.9 W (PoE on) |
Standby Power Consumption |
40.1 W |
Smart Fan Quantity |
4 x smart fans |
Acoustics |
55.4 dB(A) |
Heat Dissipation |
1660.329 BTU/hr |
Operation Temperature |
-5 to 50 ˚C (23 to 122 ˚F) |
Storage Temperature |
-20 to 70˚C (-4 to 158 ˚F) |
Operation Humidity |
0% to 95% non-condensing |
Storage Humidity |
0% to 95% non-condensing |
Dimensions |
440 x 308 x 44 mm |
Weight |
5.41 kg |
|
|
Diagnostic LEDs |
Power/Stacking ID/Fan Error/PoE Push Button (per device),
Link/Activity/Speed/PoE Mode (per 10/100/1000 |
|
Mbps port), Link/Activity/Speed (per SFP port), Link/Activity/Speed
(per 10G SFP+ port) |
|
|
Certifications |
CE, FCC, C-Tick, VCCI, BSMI |
|
IPv6 Ready Logo Phase 2 |
Safety |
cUL, CB |
|
|
Software Features |
|
Stackability |
|
Virtual Stacking Support |
• D-Link Single IP Management |
|
• Up to 32 devices per virtual stack |
|
• Up to 20G stacking bandwidth |
Physical Stacking |
• Supports Duplex Chain/Ring topology |
|
• Up to 40G stacking bandwidth full duplex |
|
• Up to 6 units per stack |
|
|
L2 Features |
|
MAC Address Table: Up to 16,384 |
|
Flow Control |
• 802.3x Flow Control |
|
• HOL Blocking Prevention |
Jumbo Frame up to 9,216 Bytes |
• |
IGMP Snooping |
• IGMP v1/v2 Snooping |
|
• IGMP v3 awareness |
|
• Supports 512 IGMP groups |
|
• Supports 128 static multicast addresses |
|
• IGMP per VLAN |
|
• Supports IGMP Snooping Querier |
|
• Host-based IGMP Snooping Fast Leave |
MLD Snooping |
• Supports MLD v1/v2 awareness |
|
• Supports 512 groups |
|
• Supports 128 Static Multicast Addresses |
|
• Per VLAN MLD Snooping |
|
• Host-based MLD Fast Leave |
|
• MLD Snooping Querier |
Spanning Tree Protocol |
• 802.1D STP |
|
• 802.1w RSTP |
|
• 802.1s MSTP |
Loopback Detection v4.07 |
|
802.3ad Link Aggregation |
• Max. 32 groups per device/8 ports per group |
Port Mirroring |
• Support 4 mirroring groups |
|
• One-to-One, Many-to-One |
|
• Supports Mirroring for Tx/Rx/Both |
Multicast Filtering |
• Forwards all unregistered groups |
|
• Filters all unregistered groups |
Ethernet Ring Protection Switching (ERPS) |
|
|
|
VLAN |
802.1Q Tagged VLAN |
|
4K VLAN Groups |
|
Configurable VID: 0~4094 |
|
GVRP |
|
Asymmetric VLAN |
|
Auto Voice VLAN |
|
Auto Surveillance VLAN 2.1 |
|
MAC-based VLAN |
|
Protocol-based VLAN |
|
|
Quality of Service (QoS) |
|
CoS based on |
• 802.1p priority |
|
• VLAN |
|
• MAC address |
|
• Ether type |
|
• IP address |
|
• DSCP |
|
• Protocol type |
|
• TCP/UDP port number |
|
• DSCP of IPv6 Traffic Class |
|
• IPv6 flow label |
802.1p Quality of Service |
|
Queue Handling |
• Strict Priority Queue (SPQ) |
|
• Weighted Round Robin (WRR) |
|
• Deficit Round Robin (DRR) |
|
• SPQ + WRR |
8 queues per port |
|
Bandwidth Control |
• Port-based (Ingress/Egress, min. granularity for 10/100/1000 BASE-T
ports is 64 Kb/s) |
|
|
L3 Features |
|
ARP |
• 256 Static ARP |
|
• Supports Gratuitous ARP |
IPv6 Neighbour Discovery (ND) |
|
16 IP interfaces |
|
Default Routing |
|
Static Routing |
• 64 IPv4 Static Route Entries |
|
• 32 IPv6 Static Route Entries |
UDP helper |
|
|
|
Access Control List (ACL) |
|
ACL based on |
• 802.1p priority |
|
• VLAN |
|
• MAC address |
|
• Ether type |
|
• IP address |
|
• DSCP |
|
• Protocol type |
|
• TCP/UDP port number |
|
• DSCP of IPv6 Traffic Class |
|
• IPv6 flow label |
ACL Actions |
• Permit |
|
• Deny |
Max. 256 access list |
|
Max. 768 rules |
|
Single or multiple ports (each rule) |
|
Time-based ACL |
|
ACL Statistics |
|
|
|
Security |
|
Port Security |
• Supports up to 128 MAC addresses per port |
Broadcast/Multicast/Unicast Storm Control |
|
Dynamic ARP Inspection |
|
D-Link Safeguard Engine |
|
DHCP Server Screening |
|
ARP Spoofing Prevention |
• Max. 64 entries |
SSH |
• Supports v2 |
|
• Supports IPv4/IPv6 |
BPDU Attack Protection |
|
DoS Attack Prevention |
|
SSL |
• Supports v1/v2/v3 |
|
• Supports IPv4/IPv6 |
Traffic Segmentation |
|
IP-MAC-Port Binding |
• DHCP snooping |
|
• IP Source Guard |
|
• Dynamic ARP Inspection |
|
• IPv6 DHCP Guard |
|
• IPv6 RA Guard |
|
• IPv6 Snooping |
|
• IPv6 Source Guard |
|
• IPv6 ND Inspection |
|
|
AAA |
|
Compound Authentication |
|
802.1X Port and MAC-based Authentication |
• Supports RADIUS and Local Server |
|
• Supports EAP, OTP, TLS, TTLS, PEAP |
Web-based Access Control (WAC) |
• Port-based Access Control |
|
• Host-based Access Control |
|
• Dynamic VLAN Assignment |
Guest VLAN |
|
RADIUS and TACACS+ authentication for switch access |
• |
RADIUS and TACACS+ accounting |
|
MAC-based Access Control (MAC) |
• Port-based Access Control |
|
• Host-based Access Control |
|
• Dynamic VLAN Assignment |
Japan Web-based Access Control (JWAC) |
• Port-based Access Control |
|
• Host-based Access Control |
|
• Dynamic VLAN Assignment |
|
|
OAM |
• Cable Diagnostics |
|
• sFlow |
|
• Factory Reset |
Management |
• Command Line Interface (CLI) |
|
• Telnet Server |
|
• TFTP Client |
|
• IPv6 Neighbor Discovery |
|
• Configurable MDI/MDIX |
|
• SNMP |
|
• Supports v1, v2c, v3 |
|
• SNMP Trap |
|
• System Log |
|
• Max. 10,000 log entries |
|
• Debug command |
|
• Multiple images |
|
• Surveillance mode |
|
• DHCP Client |
|
• D-Link Network Assistant support |
|
• SNTP |
|
• ICMPv6 |
|
• IPv4/v6 Dual Stack |
|
• DHCP Auto Configuration |
|
• RMON v1 |
|
• LLDP, LLDP-MED |
|
• DHCP relay |
|
• Web-based GUI |
|
• NTP |
|
• Telnet client (supports CLI only) |
|
• PD-Alive (PoE models only) |
D-Link Green 3.0 Technology |
• Power Saving by: |
|
• Link Status |
|
• LED or Port Shutoff |
|
• System Hibernation mode |
|
• Time-based PoE (PoE models only) |
|
|
Optional SFP Transceivers |
|
DEM-310GT |
1000BASE-LX, single-mode, 10 km |
DEM-311GT |
1000BASE-SX, multi-mode, 550 m |
DEM-312GT2 |
1000BASE-SX, multi-mode, 2 km |
|
|
Optional SFP+ Transceivers |
|
DEM-431XT |
10GBASE-SR SFP+ Transceiver (without DDM), 80m: OM1 & OM2 MMF,300m:
OM3 MMF |
DEM-432XT |
10GBASE-LR SFP+ Transceiver (without DDM), 10km |
|
|
Optional SFP+ Direct Attach Stacking
Cables |
|
DEM-CB100S |
10-GbE SFP+ 1 m Direct Attach Cable |
DEM-CB300S |
10-GbE SFP+ 3 m Direct Attach Cable |
|
|
Optional Redundant Power Supplies |
|
DPS-700 |
AC Redundant Power Supply for
DGS-1510-52XMP |