All stock codes associated to this product
GEDGS121028P, GE-DGS-1210-28P
D-Link GE-DGS-1210-28P 28 Port PoE Gigabit Web Smart
Switch including 4 Gigabit SFP ports
Overview
The DGS-1210 Series is the latest generation of D-Link Gigabit Web Smart
Switchesfeaturing D-Link Green 3.0 technology. The switches comply with the IEEE
802.3az EnergyEfficient Ethernet standard. Support for IPv6 management and
configuration featuresensures your network remains protected after an upgrade
from IPv4 to IPv6. By offeringmultiple management options, these switches allow
quick deployment, infrastructureexpansion, and seamless upgrades. Targeting
small and medium sized businesses, theDGS-1210 Web Smart switches provide
functionality, security, and manageability for afraction of the standard cost of
ownership.
The DGS-1210 Series switches support 8, 16, 24, or 48 10/100/1000BASE-T
ports. Inaddition, each switch supports 2 or 4 Gigabit SFP ports for optical
connections usingmultimode or singlemode SFP transceivers.
PoE Support
Several models in the DGS-1210 series family support Power-over-Ethernet
capabilities, simplifying deployments with IP cameras, VoIP phones, wireless
access points, and other powered devices. These models include the DGS-1210-10P,
DGS-1210-28P and DGS-1210-52MP. Using the switch’s management interface, an
administrator can control various PoE functions, such as remotely rebooting
cameras or access points, from anywhere on the network, including over the
Internet. The switches also support time-based PoE – an option that allows
administrators to set a time window that determines when each port’s PoE power
is turned on and off.
Energy Saving
The DGS-1210 Series Switches are capable of conserving power without
sacrificing operational performance or functionality by using D-Link Green 3.0
technology. Using the Energy Efficient Ethernet standard, the network will
automatically decrease the power usage when traffic is low. For environments not
fully supporting the standard, these switches offer advanced powersaving
settings including port shutoff and standby, LED shutoff, and system hibernation
based on custom time profiles. The time profiles can also be applied to the PoE
switches so that unnecessary power consumption can be saved during off hours.
The switches can also detect the length of connected cables to automatically
reduce power usage on shorter cable connections.
Easy Management
The D-Link Web Smart Switch series is designed for easy management. All
configuration can be performed through an intuitive browser-based Graphical User
Interface regardless of the host PC’s operating system. The DGS-1210 Series
switches also support a D-Link Network Assistant Utility that enables
administrators to remotely control their network down to the port level. This
utility allows customers to easily discover multiple D-Link Web Smart Switches
within the same L2 network segment. With this utility, users do not need to
change the IP address of their PC. It also simplifies the initial setup by
taking switches, within the same L2 network segment, that are connected to the
user’s PC, and displaying them on screen for instant access. This allows
extensive switch configuration and basic setup of discovered devices, including
password changes and firmware upgrades. In addition, the DGS-1210 Series
supports D-View® 6.0 and Compact Command Line Interface (CLI) through Telnet.
D-View 6.0 is a network management system that allows for the central management
of critical network characteristics such as availability, reliability,
resilience, and security.
Auto Surveillance VLAN and Voice VLAN
The D-Link Web Smart series automates the process of setting up IP
surveillance and VoIP devices on a network. Auto Surveillance VLAN consolidates
data and surveillance video transmission through the network, sparing businesses
the expense of maintaining dedicated facilities. ASV also protects the quality
of realtime video by grouping IP surveillance devices on a single high priority
VLAN. This ensures that surveillance video streams will not be affected when
ordinary data traffic is at a high level. Similarly, the Auto Voice VLAN
guarantees clear quality and efficient transmission for all voice
communication.
Extensive Layer 2 Features
Equipped with a complete lineup of L2 features, these switches include IGMP
Snooping, Port Mirroring, Spanning Tree, and Link Aggregation Control Protocol
(LACP). The IEEE 802.3x Flow Control function allows servers to directly connect
to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the
Gigabit ports provide high-speed data pipes to servers with minimum data
transfer loss. Network maintenance features include Loopback Detection and Cable
Diagnostics. Loopback Detection is used to detect loops created by a specific
port and automatically shut down the affected port. The Cable Diagnostic feature
designed primarily for administrators and customer service representatives, can
rapidly discover the type of error and determine the cable quality.
Secure your Network
D-Link’s innovative Safeguard Engine protects the switches against traffic
flooding caused by virus attacks. The switches also support 802.1X port-based
authentication, allowing the network clients to be authenticated through
external RADIUS servers. In addition, the Access Control List (ACL) feature
enhances network security and protects the network by screening traffic from
illegal MAC or IP addresses. ARP Spoofing Prevention prevents malicious
intruders from sending massive fake ARP messages through a manipulated source.
This protects important data from being stolen by Man-in-the-Middle attacks, and
prevents wasting CPU cycles on these packets. For added security, the DHCP
Server Screening feature blocks rogue DHCP server packets from user ports to
prevent unauthorized IP assignment.
Limited Lifetime Warranty
D-Link offers a Limited Lifetime Warranty on the DGS-1210 Series WebSmart
switches to further its commitment to product quality and long-term customer
confidence.
Specifications
General
Port Standards & Functions
- IEEE 802.3 10BASE-T Ethernet
- IEEE 802.3u 100BASE-TX (Fast Ethernet)
- IEEE 802.3ab 1000BASE-T (Gigabit Ethernet)
- IEEE 802.3x Flow Control for Full-Duplex Mode
- IEEE 802.3af compliance (DGS-1210-28P only)
- Auto-negotiation
Number of Ports
- DGS-1210-28P: 24 10/100/1000BASE-T PoE, 4 SFP
Network Cables
- UTP Cat.5, Cat.5e (100m max)
- EIA/TIA-568 100-ohm STP (100m max)
Full/Half Duplex
- Full/half duplex for 10/100Mbps speeds
- Full duplex for Gigabit speed
Media Interface Exchange
- Auto or configurable MDI/MDI-X
Performance
Transmission Method
MAC Address Table
- 16,000 entries per device
MAC Address Update
- Up to 256 static MAC entries
- Enable/disable auto-learning of MAC addresses
Maximum 64 bytes packet forwarding rate
Packet
Buffer Memory |
Power over Ethernet
- DGS-1210-10P, -28P, -52MP only
PoE Standard
- IEEE 802.3af & IEEE 802.3at
PoE Capable Ports
- Ports 1 to 4: Up to 30W
- Ports 5 to 24: Up to 15.4W
Physical and Environmental
AC Input
- 100 to 240 VAC 50/60Hz internal universal power supply
Maximum Power Consumption
- 251.3W (PoE on) / 21.9W (PoE off)
Standby Power Consumption
Fan Quantity
Acoustics
- Low speed: 47 dB(A) High speed: 52.4dB(A)
Heat Dissipation
Operating Temperature: -4 to 158F (-20 to 70C)
Operating Humidity: 0% to 95% non-condensing
Storage Humidity: 0% to 95% non-condensing
Dimensions
- 17.32 x 8.27 x 1.73 in. (440 x 210 x 44 mm)
- 19-inch standard rack mounting width, 1U height
Weight
Diagnostic LEDs
- Power (per device)
- PoE Max (per device) (DGS-1210-10P, -28P, -52MP only)
- Link/Activity/Speed (per 10/100/1000Mbps port)
- Link/Activity (per SFP port)
- Fan (per device) (DGS-1210-28P,-52, -52MP only)
- Button to switch LED display mode between PoE and Link/Activity
(DGS-1210-10P, -28P, -52MP only)
MTBF
Certifications
- FCC Class A
- CE Class A
- ICES-003
- VCCI Class A
- C-Tick
- BSMI Safety
- cUL
- CE LVD
Software Features
L2 Features
MAC Address Table
IGMP Snooping
- IGMP v1/v2 Snooping
- Supports 256 IGMP groups
- Supports at least 64 static multicast addresses
- IGMP per VLAN
- Supports IGMP Snooping Querier
Loopback Detection
802.3ad Link Aggregation
- Maximum of 14 groups/8 ports per group
LLDP
LLDP-MED
Jumbo Frame
Up to 9,216
bytes
Spanning Tree Protocol
802.1D
STP
802.1w RSTP
Flow
Control
802.3x Flow Control
HOL Blocking Prevention
Port Mirroring
One-to-One
Many-to-One
Supports Mirroring for Tx/Rx/Both
Multicast
Filtering
Forwards all unregistered
groups
Filters all unregistered
groups
Configurable MDI/MDIX
MLD
snooping v1/v2 (256 groups)
VLAN
802.1Q
VLAN Group
Max. 256 static VLAN groups
Configurable VID from 1 -
4094
Asymmetric VLAN
Auto Voice VLAN
Max. 10 user-defined OUI
Max. 8 default
OUI
Auto Surveillance VLAN
QoS
(Quality of Service)
802.1p Quality of Service
8 queues per
port
Queue Handling
Strict
Weighted Round Robin (WRR)
Bandwidth
Control
Port-based (Ingress/Egress, min
granularity 10/100/1000 is 64 Kbps)
QoS based on:
802.1p Priority Queues
DSCP
ToS
IPv6 Traffic Class
TCP/UDP port
L3
Features
IP Interface
Supports
1 interface
IPv6 Neighbor Discovery (ND)
Access
Control List (ACL)
Max. 50 access list
Max. 768 rules shared by IPv4, MAC
and IPv6
Each rule can only be associated with a single port
ACL
based on
802.1p priority
VLAN
MAC address
Ether
type
IP address
DSCP
Protocol type
TCP/UDP port
number
IPv6 Traffic Class
Security
Broadcast/Multicast/Unicast Storm Control
D-Link Safeguard
Engine
DHCP Server Screening
IP-MAC-Port Binding (Smart
Binding)
Supports 512 address binding
entries
ARP Inspection
ARP + IP
Inspection
Supports DHCP Snooping
802.1X Port-based
Access Control
ARP Spoofing Prevention
Max. 64 entries
Traffic Segmentation
SSH
v2
SSL
Supports
v1/v2/v3
Port Security
Supports up
to 64 MAC addresses per port
Duplicate address
detection
AAA
802.1X Authentication
Supports
local/RADIUS database
Supports port-based access
control
Supports EAP, OTP, TLS, TTLS, PEAP
IPv6
RADIUS Server
Support MD5 authentication
MIB/RFC Standards
RFC 783 TFTP
RFC 951 BootP/DHCP Client
RFC 1157 SNMP
v1, v2, v3
RFC 1213 MIB II
RFC 1215 MIB Traps Convention
RFC 1350
TFTP
RFC 1493 Bridge MIB
RFC 1769 SNTP
RFC 1542 BootP/DHCP
Client
RFC 1901 SNMP v1, v2, v3
RFC 1907 SNMP v2 MIB
RFC 1908 SNMP v1,
v2, v3
RFC 2131 BootP/DHCP Client
RFC 2138 RADIUS Authentication
RFC
2139 RADIUS Authentication
RFC 2233 Interface Group MIB
RFC-2246
SSL
RFC 2475
RFC 2570 SNMP v1, v2, v3
RFC 2575 SNMP v1, v2, v3
RFC
2598 CoS
RFC 2618 RADIUS Authentication
RFC 2819 RMON v1
RFC 2865
RADIUS Authentication
RFC 3164 System Log
RFC 3195 System Log
RFC
3411-17 SNMP
D-Link Private MIB
LLDP MIB
Zone Defense
MIB
2233 Interface Group MIB
OAM
Cable Diagnostics
Factory Reset
Management
Web-based GUI
D-Link Network Assistant Utility
Compact
CLI
Telnet Server
TFTP Client
Configurable
MDI/MDIX
SNMP
Supports
v1/v2c/v3
SNMP Trap
Backup/Upgrade firmware
Smart
Wizard
Upload/Download Configuration file
System
Log
Max. 500 log entries
BootP/DHCP
Client
SNTP
ICMP v6
IPv4/v6 Dual Stack
DHCP Auto
Configuration
Time Setting
SNTP
RMONv1
Trusted Host
Green
v3.0 Technology
Power Saving by:
Link Status
Time-based PoE: PoE ports can be turned
on/off by port or system through schedule
LED
Shutoff
System Hibernation
Port
Shutoff
Warranty Information
Warranty
Limited
Lifetime