KVR21S15S8/4 | Kingston 4GB (1 x 4GB) PC4-17000 2133MHz DDR4 SO-DIMM RAM

DESCRIPTION

This document describes ValueRAM's 512M x 64-bit (4GB) DDR4-2133 CL15 SDRAM (Synchronous DRAM), 1Rx8, non-ECC, memory module, based on eight 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2133 timing of 15-15-15 at 1.2V. This 260-pin SODIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

FEATURES

Power Supply: VDD=1.2V Typical
VDDQ = 1.2V Typical
VPP - 2.5V Typical
VDDSPD=2.2V to 3.6V
Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals

Low-power auto self refresh (LPASR)

Data bus inversion (DBI) for data bus

On-die VREFDQ generation and calibration

Single-rank

On-board I2 serial presence-detect (SPD) EEPROM

16 internal banks; 4 groups of 4 banks each

Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)

Selectable BC4 or BL8 on-the-fly (OTF)

Fly-by topology

Terminated control command and address bus

PCB:  Height 1.18â€� (30.00mm)

RoHS Compliant and Halogen-Free 

Specifications:

CL(IDD): 15 cycles

Row cycles time (trcmin): 46.5ns(min.)

Refresh to active/refresh, command time: 260ns (min.)

Row Active Time (tRASmin): 30ns (min.)

Maximum Operating Power: TBD W*

UL Rating: 94V - 0

Operating Temperature: 0C to +85C

Storage Temperature: -55 C to + 100C