All stock codes associated to this product
GLCLHSMALG, GLC-LH-SM-ALG, 9350784005571, 5553589
Overview
- This SFP (mini-GBIC) transceiver module is designed for use with Cisco
network equipment and is equivalent to Cisco part number GLC-LH-SM. This
transceiver is built to meet or exceed the specifications of the OEM and to
comply with Multi-Source Agreement (MSA) standards. This product is 100%
functionally tested, and compatibility is guaranteed. The transceiver is a
hot-swappable input/output device which allows a Gigabit Ethernet port to link
with a fiber optic network. OEM specific configuration data is loaded on to
the EEPROM of the transceiver at the factory, allowing this transceiver to
initialize and perform identically to an OEM transceiver. This transceiver may
be mixed and deployed with other OEM or third party transceivers and will
deliver seamless network performance.
- Cisco and the Cisco logo are trademarks or registered trademarks of Cisco
Systems, Inc. This product is not certified or endorsed by Cisco
Systems
Features
- SFP Multi-Source Agreement compliance
- Compliant with Fiber Channel 100-SM-LC-L standard
- Compliant with IEEE802.3z Gigabit Ethernet standard
- Industry standard small form pluggable (SFP) package
- Duplex LC connector
- Differential LVPECL inputs and outputs
- Single power supply 3.3V
- TTL signal detect indicator
- Hot Pluggable
- Class 1 laser product complies with EN 60825*1
- RoHS compliant
- Warranty: 1 Year
Application
- Distributed multi-processing
- Switch to switch interface
- High speed I/O for file server
- Bus extension application
- Channel extender, data storage
Specifications
|
Absolute Maximum Ratings |
|
|
|
|
|
Parameter |
Symbol |
Min. |
Max. |
Units |
|
Storage Temperature |
TS |
-40 |
85 |
C |
|
Supply Voltage |
Vcc |
-0.5 |
4 |
V |
|
Input Voltage |
VIN |
- 0.5 |
Vcc |
V |
|
Output Current |
Io |
--- |
50 |
mA |
|
Operating Current |
IOP |
--- |
400 |
mA |
|
Recommended Operating Conditions |
|
|
|
|
|
|
Parameter |
Symbol |
Min. |
Max. |
Units |
Note |
|
Storage Temperature |
TC |
0 |
70 |
C |
OP6C-S10-13-C |
|
|
-40 |
85 |
C |
OP6C-S10-13-I |
|
Supply Voltage |
Vcc |
3.1 |
3.5 |
V |
|
|
Supply Current |
ITX + IRX |
--- |
250 |
mA |
|
|
Transmitter Electro-optical Characteristics |
|
|
|
|
|
|
|
Vcc = 3.1 V to 3.5 V, TC = 0C to 70C ( -40C to 85C ) |
|
|
|
|
|
|
|
Parameter |
|
Symbol |
Min. |
Typ. |
Max. |
Units |
Note |
|
Output Optical Power |
|
Pout |
-9.5 |
--- |
-3 |
dBm |
Average |
|
9/125 m fiber |
|
|
|
|
|
|
|
|
Extinction Ratio |
|
ER |
9 |
--- |
--- |
dB |
|
|
Center Wavelength |
|
C |
1270 |
1310 |
1355 |
nm |
|
|
Spectral Width (RMS) |
|
|
--- |
--- |
2.5 |
nm |
|
|
Rise/Fall Time, (20-80%) |
|
Tr, f |
--- |
--- |
260 |
ps |
|
|
Relative Intensity Noise |
|
RIN |
--- |
--- |
-120 |
dB/Hz |
|
|
Total Jitter |
|
TJ |
--- |
--- |
227 |
ps |
|
|
Output Eye |
|
|
|
Compliant with IEEE802.3z |
|
|
|
|
Max. Pout TX-DISABLE Asserted |
POFF |
--- |
--- |
-45 |
dBm |
|
|
Differential Input Voltage |
|
VDIFF |
0.4 |
--- |
2 |
V |
|
|
Receiver Electro-optical Characteristics |
|
|
|
|
|
|
|
Vcc = 3.1 V to 3.5 V, TC = 0C to 70C ( -40C to 85C ) |
|
|
|
|
|
|
|
Parameter |
Symbol |
Min. |
Typ. |
Max. |
Units |
Note |
|
Optical Input Power-maximum |
PIN |
-3 |
--- |
--- |
dBm |
BER < 10-12 |
|
Optical Input Power-minimum |
PIN |
--- |
--- |
-20 |
dBm |
BER < 10-12 |
|
(Sensitivity) |
|
|
|
|
|
|
|
Operating Center Wavelength |
C |
1260 |
--- |
1610 |
nm |
|
|
Optical Return Loss |
ORL |
12 |
--- |
--- |
dB |
|
|
Signal Detect-Asserted |
PA |
--- |
--- |
-20 |
dBm |
|
|
Signal Detect-Deasserted |
PD |
-35 |
--- |
--- |
dBm |
|
|
Differential Output Voltage |
VDIFF |
0.5 |
--- |
1.2 |
V |
|
|
Data Output Rise, Fall Time |
T r, f |
--- |
--- |
0.35 |
ns |
|
|
(20-80%) |
|
|
|
|
|
|
|
Receiver Loss of Signal Output |
RX_LOSL |
0 |
--- |
0.5 |
V |
|
|
Voltage-Low |
|
|
|
|
|
|
|
Receiver Loss of Signal Output |
RX_LOSH |
2.4 |
--- |
VCC |
V |
|
|
Voltage-High |
|
|
|
|
|
|
Networking
