All stock codes associated to this product
ZM850HPPLUS, ZM-850HP PLUS, ZalmanZM850HPPLUS, Zalman ZM-850HP PLUS
Zalman ZM-850HP Plus Dual Heat-Pipe
Cooled
Features
- Dual Heatpipes for Maximum Cooling Performance and Minimum
Noise
Dual heat-pipes with ultra cooling performance are incorporated on the main
heat source, thus enabling high load operation at low fan RPM and dramatically
reducing noise levels.
- Two-Forward Switching Design
The Two-Forward Switching Design minimizes switching loss and internal heat
for enhanced reliability and stability.
- Highly Efficienct Design and 80 PLUS® Silver
Certified
This power supply is capable of reaching a maximum of 90% efficiency
(230VAC, Full & Typical Load) through its use of high switching frequency
and low power-loss circuitry. This product has been 80 PLUS Silver certified
and guarantees higher efficiency compared to uncertified products.
- 80 PLUS is an energy efficiency certification program administered by
Ecos Consulting of the U.S.A.
- Less Than 1W Standby Power Consumption
The energy efficient Green IC circuitry consumes much less standby power
(less than 1W) compared to other PSUs without this feature.
This product complies with ErP Lot 6, the Standby Power and
High Energy Efficiency standards of the European Union.
Modular cables provide organized cable management and
improved air circulation inside the computer case.
The latest PSU design standard is incorporated for
compatibility with a wide range of CPUs, motherboards, and graphic
cards.
Four independent +12V outputs provide a stable power supply
to major PC components.
Three 6-Pin and three 6+2 Pin power connectors for PCI
Express support dual and 3-way graphics card system.
A Two-Ball Bearing fan maximizes airflow while minimizing
noise for a superbly quiet computing environment.
By implementing Active PFC (Power Factor Correction), the
Passive PFC ( about 75%) has been improved up to 99% while harmful harmonic
frequencies are reduced to meet the Line Harmonic Distortion Requirement of
IEC61000-3-2 Class D Specifications.
Japanese capacitors are incorporated in the 1st stage of
smoothing circuit for reliability and stability even after an extended period
of operation.
ATX20+4 Pin Main Connector broadens the range of motherboard
compatibility.
Two ATX12V CPU 2 2 (4-Pin) power cables can be combined to
form an EPS12V CPU 8-Pin power cable.
All power cables are sleeved for easy cable management and
improved air circulation inside the computer case.
EZ Grip Connectors allow convenient installation to ODDs
& HDDs.
All connector terminals are gold-plated to minimize contact
resistance and power loss. 16AWG wires, thicker than 18AWG, are incorporated
to minimize voltage during high load operation.
Safety features including Over-Voltage Protection,
Over-Current Protection, Short-Circuit Protection, Under-Voltage Protection,
and Over-Temperature Protection safeguard the system.
The MTBF exceeds 100,000 hours of continuous operation at 25,
full load.
This product complies with the WEEE & RoHS environmental
directives of the European Union.
Specifications
1. Output Power Cable
| M/B
20+4Pin |
CPU
4+4Pin |
PCI-Ex 6+2Pin + 6Pin |
SATA |
ODD/HDD |
FDD |
| 500mm |
550mm |
500mm+150mm |
500mm+150mm+150mm |
500mm+150mm+150mm |
800mm |
2. Electrical & Physical
Characteristics
| AC Input
Range |
Voltage |
100VAC ~
240VAC |
DC
Output |
| Frequency |
50~60Hz |
Output
V. |
Output Load
Rating |
Combined
Power |
AC Input
Current
(Rated) |
100VAC |
11A |
Imin |
Imax |
Ipeak |
| 240VAC |
5.5A |
+3.3V |
0.0A |
20A |
|
180W |
850W |
| PFC Type |
Active
PFC |
+5V |
0.5A |
24A |
|
| Power Factor |
99% Maximum
|
+12V1 |
0.1A |
25A |
27A |
816W |
Inrush Current
Limit
(@ Cold start at
25C) |
115VAC |
60A |
+12V2 |
0.0A |
25A |
27A |
| 230VAC |
150A |
+12V3 |
0.0A |
35A |
37A |
| Efficiency |
90% Maximum
@230VAC, Typical load |
+12V4 |
0.0A |
28A |
30A |
DC
Output
Voltage
Regulations |
Output V. |
Regulation Range |
At Full
Load |
-12V |
0.0A |
0.5A |
|
6W |
| +3.3VDC |
±5% +3.14V~+3.47V |
+5VSB |
0.1A |
3.5A |
|
17.5W |
| +5VDC± |
±5% +4.75V~+5.25V |
Protection
Features |
| +12V1DC |
±5% +11.4V~+12.6V |
Over Voltage
Protection(OVP) |
| +12V2DC |
±5% +11.4V~+12.6V |
Over Current
Protection(OCP) |
| +12V3DC |
±5% +11.4V~+12.6V |
Short Circuit
Protection(SCP) |
| +12V4DC |
±5% +11.4V~+12.6V |
Over
Temperature Protection(OTP) |
| -12VDC |
±10% -10.8V~-13.0V |
Under Voltage
Protection(UVP) |
| +5VSB |
±5% +4.75V~+5.25V |
Ambient
Temperature |
DC
Output
Ripple
&
Noise |
Output V. |
Regulation Range |
At Full
Load |
Operation |
0°C ~
40°C |
| +3.3VDC |
50mV |
Storage |
-20°C ~
60°C |
| +5VDC |
50mV |
Ambient
Humidity |
| +12V1DC |
120mV |
Operation |
10%RH ~
90%RH |
| +12V2DC |
120mV |
Storage |
5%RH ~
95%RH |
| +12V3DC |
120mV |
Dimensions |
| +12V4DC |
120mV |
210(L) x
150(W) x 86(H) mm |
| -12VDC |
120mV |
Weight |
| +5VSB |
50mV |
4kg(Full
Package) |
Components
-
Power Supply
-
Fixing Bolts
-
Velcro Ties
-
AC Power Cord
-
Users
Manual
No additional files, specification sheets, guides or documentation found for product.
Warranty: 12 Month Return To Base Full manufacturers warranty details are available at the manufacturers (Zalman) web site.
Unless otherwise specified Techbuy is normally your first point of contact for warranty related returns, further information
regarding our warranty policies and consumer guarantees is available on our policies and service & support pages.
To apply for return of a product just go to our returns page.
These terms are in addition to and do not affect any terms, conditions, guarantees and warranties implied by law.
Visitor Reviews
[ There are no visitor reviews for this product yet]
Review Product
Click on a thumbnail to view it below
No related products found.
L7: 1 | TM: 2 | LM: 0 | TY: 7 | T: 230
|
