Form
Factor |
Mini-ITX |
Dimensions |
6.7"
x 6.7" (17.02cm x 17.02cm) |
CPU |
Intel®
Xeon® Processor D-1587. |
|
Single
Socket FCBGA1667 supported, CPU TDP support 65W |
Cores
/ Cache |
16
cores, 32 threads / 24MB cache |
Memory
Capacity |
Up
to 128GB Registered ECC RDIMM |
|
Up
to 64GB Unbuffered ECC/non-ECC UDIMM, in 4 DIMM slots |
Memory
Type |
2133/1866/1600MHz
ECC DDR4 ECC RDIMM and ECC/Non-ECC UDIMM |
DIMM
Sizes |
4GB,
8GB, 16GB, 32GB |
Memory
Voltage |
1.2V |
Error
Detection |
Corrects
single-bit errors |
|
Detects
double-bit errors (using ECC memory) |
Chipset |
System
on Chip |
SATA |
SoC
controller for 6 SATA3 (6 Gbps) ports; RAID 0,1,5,10 |
|
RSTe |
IPMI |
Support
for Intelligent Platform Management Interface v.2.0 |
|
IPMI
2.0 with virtual media over LAN and KVM-over-LAN
support |
Network
Controllers |
Dual
LAN with Intel® Ethernet Controller I350-AM2 |
|
Dual
LAN with 10Gbase-T |
|
Built
in with D-1500 SoC |
|
Single
LAN with Virtual Machine Device Queues reduce I/O
overhead |
|
Single
LAN with Supports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45
output |
|
Single
LAN with 1 Realtek RTL8211E PHY (dedicated IPMI) |
Graphics |
Aspeed
AST2400 BMC |
SATA |
6
SATA3 (6Gbps) port |
LAN |
2
RJ45 10GBase-T ports |
|
2
RJ45 Gigabit Ethernet LAN ports |
|
1
RJ45 Dedicated IPMI LAN port |
USB |
4
USB 2.0 ports (4 headers, Type A)) |
|
2
USB 3.0 ports (2 rear) |
Video
Output |
1
VGA port |
Serial
Port / Header |
1
COM Port (1 header) |
TPM |
TPM
Header |
PCI-E |
1
PCI-E 3.0 x16 |
|
Support
for SATA devices |
M.2 |
1
M.2 M-Key SATA/PCI-E 3.0 x4, 2242/2280 |
BIOS
Type |
128Mb
SPI Flash EEPROM with AMI BIOS |
BIOS
Features |
PCI
3.0 |
|
ACPI
5.0 |
|
USB
Keyboard support |
|
Hardware
BIOS Virus protection |
|
RTC
(Real Time Clock) Wakeup |
|
UEFI
2.4 |
|
SMBIOS
2.8 |
Software |
Intel®
Node Manager, IPMI (Intelligent Platform Management Interface) v2.0 with
KVM support, IPMI2.0, KVM with dedicated LAN, NMI, SUM, SuperDoctor® 5,
Watchdog |
Power
Configurations |
ACPI
Power Management |
|
CPU
Fan auto-off in sleep mode |
|
Power-on
mode for AC power recovery |
Voltage |
+1.8V,
+12V, +3.3V, +5V, Chassis intrusion header, HT, Memory, Memory Voltages,
Monitors for CPU Cores, Supports system management utility, System level
control, System temperature |
FAN |
4x
4-pin fan headers (up to 4 fans), 4 fans with tachometer monitoring, Dual
Cooling Zone, Fan speed control, Low noise fan speed control, Overheat LED
indication, Pulse Width Modulated (PWM) fan connectors, PWM fan speed
control, Status monitoring for on/off control, Status monitoring for speed
control, System level control, Thermal control tachometer fan
connectors |
Temperature |
Monitoring
for CPU and chassis environment, CPU thermal trip support, PECI, Thermal
Monitor 2 (TM2) support |
LED |
CPU
/ System Overheat LED, UID/Remote UID |
Other
Features |
12V
DC or ATX Power Source, 4-pin 12v DC power connector, ACPI power
management, ATX Power connector, Chassis intrusion detection, Chassis
intrusion header, Control of power-on for recovery from AC power loss, CPU
thermal trip support for processor protection, Dual Cooling Zones,
Hyper-Speed Technology hardware acceleration, M.2 NGFF connector, Node
Manager Support, RoHS, SDDC, System level control, UID,
WOL |
Operating
Temperature Range |
0°C
~ 60°C (32°F ~ 140°F) |
Non-Operating
Temperature Range |
-20°C
~ 60°C (-4°F ~ 140°F) |
Operating
Relative Humidity Range |
8%
- 90% (non-condensing) |
Non-Operating
Relative Humidity Range |
10%
~ 95%
(non-condensing) |